Xtreme 25ft Multicolored LED Strip Lights

pengenalan

This manual provides instructions for the Xtreme 25ft Multicolored LED Strip Lights, Model XLS7-1005-MCW. This product features 225 RGBW LEDs, offering 15 distinct colors and 4 dynamic lighting modes. It is designed for indoor use and includes a remote control for convenient operation. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Kandungan Pakej:

Rajah 1: Kandungan Pakej. The image displays the 25ft LED strip on a reel, flexible connectors, a remote control with two AAA batteries, a set of strip mounting clips and cable mounting clips, a 5V USB power adapter, and the user manual.

• 1 x 25ft Multicolored LED Strip
• 1 x Alat Kawalan Jauh
• Flexible Connectors (for cutting and reconnecting)
• 1 x 5V USB Power Adapter
• Set of Strip Mounting Clips and Cable Mounting Clips
• Manual Pengguna

Maklumat Keselamatan Penting

• Produk ini direka untuk kegunaan dalaman sahaja. Jangan dedahkan kepada air atau lembapan.
• Ensure the power adapter is compatible with your local power supply (5V USB).
• Do not connect the LED strip to power while it is still on the reel. Unroll completely before use.
• Avoid bending the LED strip sharply or applying excessive force, as this may damage the internal circuitry.
• Jauhkan daripada kanak-kanak.
• Do not attempt to repair or modify the product. Contact customer support if issues arise.
• Pastikan permukaan pemasangan bersih, kering dan licin untuk prestasi pelekat yang optimum.

Persediaan dan Pemasangan

1. Sediakan Permukaan: Clean the desired installation surface thoroughly. Ensure it is dry, smooth, and free of dust or grease.
2. Rancang Susun Atur: Unroll the LED strip and plan its placement. Avoid sharp bends.
3. Sapukan Jalur: Peel off a small section of the adhesive backing from the LED strip. Carefully press the strip onto the prepared surface, gradually peeling off more backing as you go. Apply firm, even pressure along the entire length.
4. Selamat dengan Klip (Pilihan): For added security, especially on textured surfaces or corners, use the provided mounting clips.
5. Cutting and Reconnecting (Optional):

   If a shorter length is required, the LED strip can be cut at designated cut marks (indicated by a scissor icon or copper pads). Ensure the power is disconnected before cutting.

   

   Figure 2: Cutting the LED Strip. Step 1 shows scissors cutting the strip at a designated mark. The image also shows the remote control and the LED strip's color capabilities.

   To reconnect, align the copper pads of the cut strip with the pins inside a flexible connector. Close the connector securely. Repeat for additional sections or corners.

   

   Figure 3: Using Connectors for Corners. A flexible connector is used to create a clean, professional corner with the LED strip.

6. Sambungkan Kuasa: Plug the LED strip's USB connector into the provided 5V USB power adapter, then plug the adapter into a standard wall outlet.

Arahan Operasi

The Xtreme LED Strip Lights are controlled using the included remote control.

Rajah 4: Susun atur Kawalan Jauh. The remote features buttons for power, dimming, color selection (15 colors), and four dynamic modes.

Fungsi Kawalan Jauh:

• HIDUP/MATI: Press to turn the LED strip lights on or off.
• TETAP SEMULA: Resets the light strip to its default settings.
• DIMMER (Sun Icon): Adjusts the brightness level of the lights. Press repeatedly to cycle through brightness levels.
• COLOR SELECTION: Choose from 15 distinct static colors by pressing the corresponding color button.
• PEMILIHAN MODE:
  • KILAT: Berubah-ubah warna dengan pantas.
  • STROB: Flashes a single color on and off.
  • PUDAR: Peralihan antara warna dengan lancar.
  • LICIN: Gradually changes between colors with a softer transition than Fade.
• WHITE LIGHTS: Buttons for COOL, SOFT, WARM, and PURE white light options.

Ensure the remote control is pointed towards the receiver on the LED strip for optimal response.

Penyelenggaraan

• Pembersihan: Disconnect power before cleaning. Gently wipe the LED strip with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
• Storan: If storing the LED strip for an extended period, carefully roll it back onto its original reel or a similar circular object to prevent kinks and damage. Store in a cool, dry place.
• pelekat: The adhesive backing is designed for single-use application. If the strip needs to be re-positioned, additional mounting clips or a new adhesive solution may be required.

Menyelesaikan masalah

Spesifikasi Produk

Waranti dan Sokongan

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Xtreme Digital Lifestyle Accessories webtapak.

For general inquiries, you may visit the brand's Amazon store: Xtreme Digital Lifestyle Accessories Store.