LUTEC 72W 7500LM 3-Head LED Motion Sensor Security Light

pengenalan

This manual provides essential information for the safe and efficient operation of your LUTEC 72W 7500LM 3-Head LED Motion Sensor Security Light. Please read thoroughly before installation and use.

• Penjimatan Tenaga: LED units deliver 72W, 7500 Lumens, and 5000K daylight white brightness, equivalent to a 720W incandescent bulb, reducing electricity consumption by up to 88%.
• Diaktifkan Pergerakan: Features a 180-degree sensing angle with a detection range of 0-69 feet. The adjustable timer allows settings for 1, 3, or 10 minutes.
• Mod Pencahayaan Serbaguna: Offers Test Mode, Security Mode, Dusk to Dawn Mode, and Manual Override Mode to suit various needs. Manual override provides constant 100% brightness for a selected period, deactivating during daylight hours.
• Durable & Adjustable Design: Constructed from aluminum, this light features IP65 waterproofing and a 50,000-hour lifespan. Adjustable heads provide customizable coverage for areas like porches, backyards, garages, driveways, walkways, and steps.

Persediaan dan Pemasangan

Ensure power is OFF at the circuit breaker before beginning installation. Consult a qualified electrician if you are unsure about any steps.

1. Sediakan Permukaan Pemasangan: Ensure the mounting surface is clean and stable.
2. Pasang Pendakap Pelekap: Secure the provided mounting bracket to your junction box.
3. Sambungan Pendawaian: Connect the light's wires to your household wiring:
   • Sambungkan hijau/kuning wire (ground) from the light to the ground wire from the junction box.
   • Sambungkan putih wire (neutral) from the light to the neutral wire from the junction box.
   • Sambungkan hitam wire (live) from the light to the live wire from the junction box.
   Use the provided wire nuts to secure connections.
4. Pasang Lekapan Lampu: Carefully align the light fixture with the mounting bracket and secure it using the provided screws. Ensure the motion sensor faces outwards.
5. Tutup Pemasangan: Apply the included gasket to ensure a watertight seal between the fixture and the mounting surface.

Figure 1: Wiring diagram for easy installation. Connect live, neutral, and earth wires securely.

Figure 2: Three simple steps to complete the installation of your security light.

Figure 3: Properly mounted light fixture. Ensure the motion sensor is positioned to face the desired detection area.

Mod Pengendalian dan Tetapan

The motion sensor unit features adjustable controls for distance (sensitivity) and time (duration) of illumination, along with four distinct operating modes.

Figure 4: Motion sensor controls for adjusting sensitivity (Distance) and light duration (Time).

Distance (Sensitivity) Settings:

• L (Rendah): 0-20 ft detection range.
• M (Sederhana): 20-39 ft detection range.
• H (Tinggi): 39-69 ft detection range.

Time (Duration) Settings:

• 1 MIN: Light stays on for 1 minute after motion stops.
• 3 MIN: Light stays on for 3 minutes after motion stops.
• 10 MIN: Light stays on for 10 minutes after motion stops.

Mod Pencahayaan:

• Mod percubaan: For initial setup and aiming. The light turns on for 5 seconds when motion is detected, even during daylight hours.
• Mod Keselamatan: Light activates to 100% brightness only when motion is detected during nighttime.
• Mod Senja hingga Subuh: The light turns on at 20% brightness at dusk and remains on. It then switches to 100% brightness when motion is detected, returning to 20% after motion ceases.
• Mod Gantian Manual: Allows the light to operate continuously at 100% brightness for a selected period. This mode deactivates automatically during daylight hours.

Figure 5: Visual representation of the Dusk to Dawn mode, providing continuous low-level light with full brightness on motion.

Ciri dan Reka Bentuk

The LUTEC LED Security Light is engineered for performance and durability in outdoor environments.

• Kecerahan yang tinggi: 7500 Lumens at 5000K daylight white for clear, wide illumination.
• Kepala Lampu Boleh Laras: Three rotatable light heads allow for flexible light direction, covering angles from 210° to 300°.
• Pembinaan Teguh: Made with high-quality aluminum for excellent heat dissipation and longevity.
• IP65 Kalis Air: Designed to withstand various weather conditions, offering weather-resistant and frost-resistant performance.

Gambar 6: Lebihview of the light's powerful illumination capabilities.

Figure 7: The adjustable heads allow you to direct light precisely where needed.

Figure 8: The IP65 rating ensures reliable performance in various outdoor conditions.

Penyelenggaraan

To ensure optimal performance and longevity of your security light, follow these maintenance guidelines:

• Pembersihan tetap: Periodically wipe the light fixture and motion sensor lens with a soft, damp kain untuk menghilangkan kotoran, habuk dan serpihan. Elakkan pembersih yang kasar.
• Periksa Pendawaian: Annually inspect all wiring connections for any signs of wear, fraying, or corrosion. Ensure connections remain tight.
• Semak Pemasangan: Verify that the light fixture remains securely mounted to the wall. Tighten any loose screws as needed.
• Elakkan halangan: Ensure no new obstructions (e.g., growing foliage) block the motion sensor's view or the light's output.

Menyelesaikan masalah

If you encounter issues with your security light, refer to the following common troubleshooting steps:

• Lampu Tidak Dihidupkan:
  • Periksa bekalan kuasa pada pemutus litar.
  • Ensure the light sensor is not obstructed by debris or positioned in an area that receives constant light.
  • Verify the operating mode is correctly set (e.g., not in Test Mode during daylight).
• Cahaya Kekal Menyala Berterusan:
  • Check the motion sensor for obstructions or constant movement within its detection range.
  • Adjust the 'Time' setting to a shorter duration.
  • Ensure the light is not in Manual Override Mode unintentionally.
• Light Not Detecting Motion:
  • Adjust the 'Distance' (sensitivity) setting to a higher level.
  • Clear any obstructions from the motion sensor's field of view.
  • Ensure the sensor is positioned correctly to cover the desired area.
• Cahaya berkelip:
  • Periksa semua sambungan pendawaian untuk kesesakan.
  • Pastikan bekalan kuasa stabil.

Jika masalah berterusan selepas mencuba langkah ini, sila hubungi sokongan pelanggan.

Spesifikasi

Waranti dan Sokongan

Your LUTEC LED Security Light comes with a Limited Warranty. For specific details regarding the warranty period and coverage, please refer to the warranty information included in your product packaging or contact customer support.

Sokongan Pelanggan: We provide 7*24h after-sales service. If you encounter any issues or have questions, please do not hesitate to contact us for assistance.