NEXPOW Q11 Jump Starter User Manual

1. Pengenalan

Thank you for choosing the NEXPOW Q11 Jump Starter. This device is designed to safely and efficiently start 12V vehicles with up to 12L gas or 10L diesel engines. It also functions as a portable power bank for electronic devices and includes an LED flashlight. Please read this manual thoroughly before use to ensure proper operation and safety.

2. Maklumat Keselamatan

Always observe the following safety precautions when using the NEXPOW Q11 Jump Starter:

• Jangan rendam unit di dalam air.
• Jangan kendalikan unit dalam suasana mudah meletup, seperti dalam kehadiran cecair mudah terbakar, gas atau habuk.
• Pastikan pengudaraan yang betul semasa digunakan.
• Jauhkan daripada kanak-kanak.
• Jangan cuba melompat memulakan bateri beku.
• Jangan hubungkan cl positif dan negatifampbersama-sama.
• The unit features spark-proof, reverse polarity, low-temperature, high-temperature, and over-load protection untuk operasi yang selamat.
• Beroperasi dalam julat suhu yang ditentukan iaitu -4°F hingga 104°F (-20°C hingga 40°C).

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej anda:

Image: Contents of the NEXPOW Q11 Jump Starter package, including the jump starter unit, USB-C cable, battery clamps, cigarette lighter converter, user manual, and zipper carry case.

1. NEXPOW Q11 Jump Starter Unit
2. Kabel USB-C ke USB-C
3. Bateri Pintar Clamps with Starter Cable
4. Penukar Pemetik Rokok
5. Manual Pengguna (dokumen ini)
6. Zipper Carry Case

4. Ciri dan Komponen Produk

The NEXPOW Q11 is equipped with several features for convenience and safety:

Imej: Depan dan sisi view of the NEXPOW Q11 Jump Starter, highlighting the 3.2-inch LED display, Power/Flashlight Button, Type-C Input/Output (PD60W), USB-A Output, DC Output, EC-5 Output, and LED Light.

• 3.2-inch LED Display: Shows remaining battery capacity, charging status, and operational information.
• PD60W Type-C Port (IN/OUT): Supports two-way quick charging, allowing the unit to be recharged quickly (0% to 80% in approximately 1 hour) and to charge compatible devices.
• Keluaran USB-A: Untuk mengecas telefon pintar, tablet dan peranti berkuasa USB yang lain.
• Output DC: Provides 12-16.8V/10A for compatible devices.
• EC-5 Output: Connection point for the smart battery clamps.
• Lampu suluh LED bersepadu: Offers three modes: constant light, SOS signal, and strobe.

5. Persediaan dan Pengecasan Awal

Before first use, fully charge the NEXPOW Q11 Jump Starter.

1. Connect the provided USB-C to USB-C cable to the PD60W Type-C port on the jump starter.
2. Connect the other end of the cable to a compatible USB-C wall adapter (not included) or a power source.
3. Paparan LED akan menunjukkan status pengecasan dan peratusan bateritage. Charge until the display indicates 100%.
4. A full charge typically takes about 1 hour using a 60W PD charger.

6. Arahan Operasi

6.1. Lompat Memulakan Kenderaan

Pastikan jump starter dicas sekurang-kurangnya 50% sebelum cuba memulakan kenderaan dengan jump start.

Image: The NEXPOW Q11 Jump Starter with its smart clamps connected to a 12V car battery, ready to start the vehicle.

1. Sambungkan Clamps: Insert the blue plug of the smart battery clamps into the EC-5 output port on the jump starter. Ensure a firm connection.
2. Lampirkan pada Bateri: Sambungkan MERAH positif (+) clamp to the vehicle's positive (+) battery terminal. Connect the HITAM negatif (-) clamp ke terminal bateri negatif (-) kenderaan.
3. Petunjuk Semak: Lampu penunjuk pada lampu pintaramps will show the connection status. A solid green light indicates a correct and safe connection. If it flashes or shows red, check connections and battery status.
4. Mulakan Kenderaan: Sebaik sahaja lampu hijau menyala, hidupkan enjin kenderaan anda.
5. Keluarkan Clamps: Selepas enjin dihidupkan, segera keluarkan smart clamps daripada bateri kenderaan, kemudian cabut sambungan clamps daripada pemula lompat.

6.2. Mengecas Peranti Elektronik

Use the USB-A or Type-C ports to charge your portable electronics.

Image: The NEXPOW Q11 Jump Starter connected via USB-C and USB-A to charge a tablet and a smartphone simultaneously.

• Connect your device's charging cable to the appropriate USB-A or Type-C output port on the jump starter.
• The jump starter will automatically begin charging your device. The LED display will show the remaining battery capacity.

6.3. Menggunakan Lampu Suluh LED

The integrated LED flashlight has three modes for various situations.

Image: The NEXPOW Q11 Jump Starter's LED flashlight in use, providing illumination in a dark engine compartment, demonstrating its utility for various lighting needs.

• Press and hold the Power/Flashlight button for 3 seconds to turn on the constant light mode.
• Press the button again to cycle through the modes: isyarat SOS → Lampu strob.
• Tekan dan tahan butang sekali lagi untuk mematikan lampu suluh.

7. Penyelenggaraan

Proper maintenance ensures the longevity and performance of your jump starter.

• Isi semula secara berkala: For optimal battery life, recharge the unit every 3-6 months, even if not used.
• Storan: Simpan jump starter di tempat yang sejuk dan kering, jauh daripada cahaya matahari langsung dan suhu yang melampau.
• Pembersihan: Lap unit dengan kain kering dan lembut. Jangan gunakan bahan kimia yang keras atau bahan yang melelas.
• Bateri Clamps: Periksa clamps and cables for any damage before each use.

8. Penyelesaian masalah

Jika anda menghadapi masalah, rujuk kepada masalah dan penyelesaian biasa berikut:

9. Spesifikasi

10. Waranti dan Sokongan

NEXPOW products are designed for reliability and performance. For warranty information or technical support, please refer to the warranty card included in your package or visit the official NEXPOW weblaman web. Jika anda mempunyai sebarang pertanyaan atau memerlukan bantuan, sila hubungi pasukan khidmat pelanggan kami.