1. Pengenalan
Thank you for choosing the Claiks Electric Standing Desk. This manual provides essential information for the safe and efficient use of your new desk. Designed for comfort and productivity, this desk allows you to easily switch between sitting and standing positions, promoting a healthier work environment. Its spacious 160x80cm desktop offers ample room for your equipment and tasks.
Please read this manual thoroughly before assembly and operation, and keep it for future reference.
2. Maklumat Keselamatan
- Had Berat: Do not exceed the maximum weight capacity of 80 kg (176 lbs) on the desktop. Overloading can cause damage to the desk and potential injury.
- Kestabilan: To ensure optimal stability, especially when the desk is at higher settings or if heavy equipment is placed on it, it is recommended to secure the desk to a wall using appropriate anchors (not included).
- Bekalan Kuasa: Use only the provided power adapter. Ensure the power cord is not pinched or damaged. Keep liquids away from electrical components.
- Kanak-kanak dan Haiwan Kesayangan: Jauhkan kanak-kanak dan haiwan peliharaan daripada meja semasa operasi untuk mengelakkan kemalangan.
- Pembersihan: Pastikan tiada halangan di atas atau di bawah meja semasa melaraskan ketinggiannya.
- Perhimpunan: Follow all assembly instructions carefully. Incorrect assembly can lead to instability or malfunction.
- alam sekitar: The desktop is made from environmentally friendly materials with low indoor air pollutant emissions.
3. Kandungan Pakej
Before beginning assembly, please verify that all parts are present and undamaged. Refer to the diagram below for a visual representation of the components.
Image: All components of the Claiks Electric Standing Desk, including desktop sections, frame, motor, control panel, and hardware.
- Desktop sections (4 pieces for the 160cm width)
- Desk legs and feet
- Motor and control box
- Panel kawalan
- Penyesuai kuasa dan kabel
- Batang penghantaran
- Cable clips and storage hooks
- Perkakasan pemasangan (skru, sepana Allen)
4. Persediaan dan Pemasangan
Assembly typically takes approximately 1 hour. An electric screwdriver is highly recommended for faster and easier assembly due to the number of screws involved. Please follow the step-by-step instructions provided in the included assembly guide.
- Buka bungkusan semua komponen dan sahkan terhadap senarai kandungan pakej.
- Assemble the desk frame according to the diagrams. Ensure all screws are tightened securely.
- Attach the desktop sections to the frame.
- Install the motor and control box. Connect the transmission rod between the legs, ensuring it is fully inserted into the holes on both sides. This is crucial for proper height adjustment functionality.
- Mount the control panel to the underside of the desktop in an accessible location.
- Connect all cables to the control box and motor, then plug in the power adapter.
- Organize cables using the provided cable clips and storage hooks for a tidy workspace.
If you encounter any difficulties during assembly, please refer to the detailed diagrams in the separate assembly manual or contact customer support.
5. Arahan Operasi
5.1 Pelarasan Ketinggian
The desk's height can be adjusted electrically within a range of 72 cm to 118 cm (28.3 to 46.5 inches) at a speed of 20mm/s. The control panel is located on the front edge of the desk for easy access.
Image: Multifunction Controller Panel
- Butang Naik / Turun: Gunakan butang ▲ (Atas) dan ▼ (Bawah) untuk melaraskan meja secara manual mengikut ketinggian yang anda inginkan. Ketinggian semasa akan dipaparkan pada skrin digital.
- Pratetap Memori: The desk features three memory preset buttons (1, 2, 3) to save and recall your preferred heights.
- Menyimpan Pratetap: Adjust the desk to your desired height. Press the 'M' button (or checkmark button) once, then press one of the number buttons (1, 2, or 3) within 3 seconds to save the current height to that preset.
- Mengimbas semula Pratetap: Press the corresponding number button (1, 2, or 3) to automatically move the desk to the saved height.
5.2 Smooth and Quiet Operation
The Claiks Electric Standing Desk is designed for smooth and quiet operation, ensuring minimal disturbance in your workspace. The operating noise level is approximately 45dB, comparable to a quiet library.
Image: Smooth and Stable Movement
6. Penyelenggaraan
The Claiks Electric Standing Desk requires minimal maintenance to ensure its longevity and performance.
- Pembersihan: The desktop is made with melamine resin, making it resistant to water, heat, and stains. Wipe the surface with a soft, damp kain dan detergen ringan jika perlu. Elakkan pembersih yang kasar atau bahan kimia yang keras.
- Bingkai: Periodically check all screws and connections to ensure they remain tight. Tighten if any looseness is detected.
- Komponen Elektrik: Keep the motor, control box, and cables free from dust and debris. Do not attempt to open or repair any electrical components yourself.
7. Penyelesaian masalah
If you experience issues with your Claiks Electric Standing Desk, please refer to the following common troubleshooting steps:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Desk does not move or only one leg moves. | Transmission rod not fully inserted; loose cable connection; power issue. | Ensure the transmission rod is fully inserted into both legs. Check all cable connections to the control box and motor. Verify the power adapter is securely plugged into a working outlet. |
| Meja bergerak tidak sekata atau mengeluarkan bunyi yang luar biasa. | Uneven weight distribution; loose frame components. | Distribute weight evenly on the desktop. Check and tighten all frame screws. |
| Control panel display is off or unresponsive. | Power issue; faulty control panel. | Check power connections. Try unplugging and re-plugging the desk after 30 seconds. If the issue persists, contact customer support. |
| Desk stops moving during adjustment. | Perlindungan beban lampau diaktifkan; perlindungan haba diaktifkan. | Reduce the weight on the desk. Allow the motor to cool down for 20-30 minutes before attempting to adjust again. |
If these steps do not resolve the issue, please contact Claiks customer support for further assistance.
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Claiks |
| Model | Meja Berdiri Elektrik |
| Dimensi Desktop (W x D) | 160 cm x 80 cm (63 inci x 31.5 inci) |
| Julat Pelarasan Tinggi | 72 sm - 118 sm (28.3 inci - 46.5 inci) |
| Kelajuan Mengangkat | 20 mm/s |
| Kapasiti Berat | 80 kg (176 lbs) |
| Bahan Desktop | Melamine Resin Laminate |
| Bahan Asas | logam |
| Color (Frame/Top) | White Frame / Natural Top (Beige) |
| Tahap Kebisingan | Kira-kira 45 dB |
| Pratetap Memori | 3 ketinggian yang boleh diprogramkan |
| Berat Pakej | 29 kg (63.9 lbs) |
| ASIN | B0DBLFKLN3 |
9. Waranti dan Sokongan
Claiks stands behind the quality of its products. Your electric standing desk comes with a Waranti pengilang selama 3 tahun dari tarikh pembelian.
- During the warranty period, Claiks will provide free repair or replacement for any manufacturing defects or malfunctions under normal use.
- This warranty does not cover damage caused by improper assembly, misuse, accidents, unauthorized modifications, or normal wear and tear.
Sokongan Pelanggan
Our customer support team is available to assist you with any questions or concerns regarding your Claiks Electric Standing Desk. We offer support in multiple languages, including English and Japanese.
For assistance, please contact us through the Amazon platform or visit the official Claiks brand store:
Claiks Official Brand Store on Amazon.co.jp
Please have your purchase details (ASIN: B0DBLFKLN3) ready when contacting support to ensure a quicker resolution.
