pengenalan
Thank you for choosing the Claiks Electric Standing Desk. This manual provides essential information for the safe and efficient use of your new desk. Designed for enhanced productivity and comfort, this height-adjustable desk allows you to seamlessly switch between sitting and standing positions, promoting a healthier work environment. Please read these instructions carefully before assembly and operation, and retain them for future reference.
Image: The Claiks Electric Standing Desk set up in an office, showcasing its spacious surface and integrated features like a hanging hook for a backpack.
Persediaan dan Perhimpunan
Assembly of the Claiks Electric Standing Desk typically takes approximately 1 hour. For optimal efficiency and to prevent fatigue, an electric screwdriver is highly recommended. Please follow the included diagrams for step-by-step instructions.
Kandungan Pakej
Before beginning assembly, ensure all parts are present and undamaged. Refer to the parts list diagram below.
Imej: Meletup view illustrating all components of the Claiks Electric Standing Desk, including desktop panels, frame parts, and assembly hardware.
Petua Perhimpunan
- Review Arahan: Carefully read all assembly steps before starting.
- Susun Bahagian: Letakkan semua komponen dan perkakasan, padankannya dengan senarai bahagian.
- Pemutar Skru Elektrik: Use an electric screwdriver with appropriate bits for faster and easier assembly.
- Perhimpunan Dua Orang: While possible for one person, having a second person can make assembly easier, especially when handling the desktop.
- Transmission Rod: Ensure the transmission rod is fully and securely inserted into its designated holes to prevent operational issues.
Image: A diagram detailing the desk's dimensions (160cm W x 80cm D x 72-118cm H) and highlighting features like the storage hook, cable clips, and footrest.
Operasi
The Claiks Electric Standing Desk features intuitive controls for height adjustment and memory presets, allowing you to customize your workspace effortlessly.
Pelarasan Ketinggian
- Julat: The desk can be adjusted between 72cm and 118cm.
- Kelajuan: The lifting speed is approximately 20mm/s.
- Panel Kawalan: Gunakan Up dan Bawah arrows on the control panel to manually adjust the desk to your desired height.
Image: Two Claiks desks demonstrating the full height adjustment range, from a low sitting position to a high standing position.
Pratetap Memori
The desk features a memory function to store up to three preferred heights for quick recall.
- Laraskan meja pada ketinggian yang anda inginkan menggunakan anak panah Atas/Bawah.
- Tekan ke M button (if available, or a dedicated 'Set' button) followed by one of the numbered memory buttons (1, 2, atau 3) untuk menyimpan ketinggian semasa.
- Untuk mengingat semula ketinggian yang disimpan, hanya tekan butang bernombor yang sepadan (1, 2, atau 3). The desk will automatically move to the stored position.
Image: A close-up of the desk's control panel, showing the digital height display, up/down arrows, and three memory preset buttons.
Operasi Senyap dan Lancar
The Claiks Electric Standing Desk operates quietly, with noise levels around 45dB, ensuring minimal disruption to your work environment. The lifting mechanism is designed for smooth and stable transitions.
Image: The desk in a quiet setting, with a graphic illustrating its low noise level (45dB) during operation.
Image: A house of cards on the desk, symbolizing the smooth and stable movement of the height adjustment.
Penyelenggaraan
Proper care and maintenance will ensure the longevity and optimal performance of your Claiks Electric Standing Desk.
Cleaning the Desktop
- The desktop surface is made of melamine resin, which is resistant to water, heat, and stains.
- For daily cleaning, wipe the surface with a soft, damp kain.
- For stubborn stains, use a mild soap solution and then wipe dry immediately.
- Avoid using abrasive cleaners, harsh chemicals, or solvents, as these can damage the surface finish.
Kerangka dan Mekanisme
- Periksa semua skru dan bolt secara berkala untuk memastikan ia ketat. Ketatkan semula jika perlu.
- Keep the lifting columns free from dust and debris. Wipe with a dry cloth.
- Do not lubricate the lifting mechanism unless specifically instructed by customer support.
- Ensure power cables are not pinched or damaged.
Menyelesaikan masalah
If you encounter any issues with your Claiks Electric Standing Desk, refer to the following common troubleshooting steps.
Desk Not Moving or Responding
- Sambungan Kuasa: Ensure the power cable is securely plugged into both the desk and a working wall outlet.
- Transmission Rod: Verify that the transmission rod connecting the lifting columns is fully and correctly inserted into its designated holes. A loose connection can prevent movement.
- Lebihan beban: Check if the desk is overloaded. The maximum load capacity is 80kg. Remove excess weight and try again.
- Tetapkan semula: Some desks have a reset function. Consult the full manual or contact support for specific reset procedures.
Bunyi Luar Biasa Semasa Operasi
- While the desk is designed for quiet operation (approx. 45dB), minor sounds are normal.
- If you hear grinding, clicking, or excessively loud noises, stop operation immediately.
- Check for any obstructions under or around the desk that might be interfering with the lifting mechanism.
- Ensure all assembly screws are tight.
Uneven Lifting
- This can often be resolved by performing a reset procedure.
- Pastikan meja berada pada permukaan yang rata.
- Verify that the transmission rod is properly connected and not bent.
If these steps do not resolve the issue, please contact Claiks customer support for further assistance.
Image: A child seated on the desk, illustrating its robust 80kg load capacity.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Claiks |
| Model | 160cm |
| Dimensi Produk (W x D x H) | 160cm x 80cm x 72-118cm |
| Julat Pelarasan Tinggi | 72cm hingga 118cm |
| Kelajuan Mengangkat | 20mm/s |
| Kapasiti Muatan | 80kg |
| Tahap Kebisingan | lebih kurang 45dB |
| Bahan Desktop | Melamine Resin (Laminate finish) |
| Bahan Asas | logam |
| Ciri Bersepadu | Keyboard tray, Memory function (3 presets) |
| Jenis Bilik | Pejabat, Bilik Belajar |
| ASIN | B0DBLFCT71 |
Waranti dan Sokongan
Claiks is committed to providing high-quality products and excellent customer service.
Waranti Pengeluar
All Claiks Electric Standing Desks come with a Waranti pengilang selama 3 tahun. During this warranty period, Claiks offers free repair or replacement services for any manufacturing defects or malfunctions under normal use conditions.
Sokongan Pelanggan
Our customer support team is available to assist you with any questions, assembly issues, or troubleshooting needs. We offer support in multiple languages, including English and Japanese.
Please feel free to contact us anytime through the retailer's platform or directly via the contact information provided on the official Claiks webtapak.
