1. Pengenalan
Thank you for choosing the ATOMSTACK A6 Ultra 6W Laser Engraver. This manual provides essential information for the safe and effective operation, setup, and maintenance of your device. Please read this manual thoroughly before using the product to ensure optimal performance and safety. The ATOMSTACK A6 Ultra is a high-precision laser engraving and cutting machine designed for various materials, featuring a 6W optical laser output and a unibody frame for ease of use.
2. Maklumat Keselamatan
Operating a laser engraver involves potential risks. Adhere to all safety guidelines to prevent injury or damage to the equipment.
2.1 Langkah Keselamatan Am
- Perlindungan Mata: Always wear appropriate laser safety goggles when the laser is operating. The device includes a protective shield, but additional eye protection is recommended.
- Pengudaraan: Operate the engraver in a well-ventilated area to dissipate fumes and smoke produced during engraving and cutting.
- Bahaya Kebakaran: Laser engraving can ignite flammable materials. Keep a fire extinguisher nearby and never leave the machine unattended during operation.
- Keserasian Bahan: Hanya bahan ukiran atau potong yang dinyatakan selamat untuk pemprosesan laser. Elakkan bahan yang menghasilkan asap toksik atau sangat memantulkan cahaya.
- Kanak-kanak dan Haiwan Kesayangan: Keep children and pets away from the laser engraver at all times. The protective cover helps prevent accidental exposure to the laser point.
- Hentian kecemasan: Biasakan diri anda dengan lokasi dan operasi butang berhenti kecemasan.
- Bekalan Kuasa: Use only the provided power adapter. Ensure the power supply meets the specified voltage keperluan.
2.2 Integrated Safety Features
- Laser Protective Cover: The device is equipped with an orange protective cover that filters laser light, reducing the need for additional eyewear for observers and preventing pets from seeing the laser spot.
- Auto Laser Shut-off: The enclosure features two interlocks that automatically shut off the laser when the cover is opened during operation.
- Suis Had: Four-direction limit switches provide enhanced safety by defining the operational boundaries of the laser module.
- Position Movement Protection & Fire Detection: The system includes features to detect abnormal movement and potential fire hazards, enhancing operational safety.
Rajah 2.1: A visual representation of the ATOMSTACK A6 Pro's comprehensive safety features, including mechanisms for position movement protection, fire detection, double-layer eye protection, automatic laser shut-off when the cover is open, and four-direction limit switches for enhanced operational safety.
3. Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej anda:
- 1 x ATOMSTACK A6 Ultra Laser Engraving Machine
- 1 x B3 Dust Cover
- 1 x H2 Base Kit
- 1 x Power Adapter (100-240V AC, 50/60HZ input; 24V 5A output)
- 1 x Kabel USB
- 1 x Manual Pengguna (dokumen ini)
- Necessary assembly tools and accessories (e.g., screws, wrenches)
4. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Jenama | ATOMSTACK |
| Model | A6 Ultra (A6 Pro) |
| Saiz Ukiran | 365 x 305 mm |
| Total Machine Power | 50W |
| Optical Laser Output Power | 5-6W |
| Panjang Gelombang Laser | 455 ± 5 meter persegi |
| Titik Laser | 0.05 x 0.05 mm |
| Mod Fokus | Fixed focus laser (no focusing required) |
| Perisian Pengendalian | LaserGRBL, LightBurn |
| Sistem Operasi yang Disokong | Windows, Linux, macOS |
| Disokong File Format | JPG, JPEG, SVG, PNG, BMP, PDF, G-Code, DXF |
| Kaedah Pemindahan Data | USB, APP |
| Input Kuasa | 100-240V AC, 50/60HZ |
| Output Kuasa | 24V 5A |
| Pensijilan | CE, FCC, RoHS, FDA, PSE |
| Dimensi Produk (L x W x H) | 60 x 17 x 60 cm |
| Berat Produk | 7.5 kg |
| Nombor Model | T-A6UH2 |
5. Persediaan
The ATOMSTACK A6 Ultra features a unibody frame design, significantly simplifying the setup process. Most components are pre-assembled, allowing for quick deployment.
5.1 Perhimpunan Permulaan
- Bongkar: Keluarkan semua komponen dari pembungkusan dengan berhati-hati.
- Kedudukan: Place the engraver on a stable, level surface in a well-ventilated area.
- Sambungkan Kuasa: Plug the power adapter into the engraver and then into a suitable power outlet.
- Sambungkan ke Komputer (Pilihan): If using a computer for control, connect the engraver to your computer via the provided USB cable.
- Pasang Perisian: Install the recommended operating software (LaserGRBL or LightBurn) on your computer. Refer to the software's documentation for installation instructions.
Rajah 5.1: A user setting up the ATOMSTACK A6 Pro laser engraver, highlighting its unibody frame design that requires no complex installation, allowing for immediate use after unboxing.
Rajah 5.2: The ATOMSTACK A6 Pro laser engraver featuring its integrated camera for precise positioning, alongside a screenshot of the LightBurn software interface demonstrating its use.
6. Arahan Operasi
This section outlines the basic steps for operating your ATOMSTACK A6 Ultra laser engraver.
6.1 Preparing for Engraving/Cutting
- Hidupkan kuasa: Turn on the main power switch of the engraver.
- Pelancaran Perisian: Open LaserGRBL or LightBurn software on your computer.
- Peletakan Bahan: Place the material to be engraved or cut onto the working bed. Ensure it is flat and securely positioned.
- Memfokuskan: The A6 Ultra features a fixed-focus laser, eliminating the need for manual focusing.
- Design Import: Import reka bentuk anda file (JPG, JPEG, SVG, PNG, BMP, PDF, G-Code, DXF) into the software.
- Tetapan Parameter: Adjust laser power, speed, and passes according to the material type and desired effect. Refer to material testing guides for optimal settings.
- Kedudukan: Use the software's positioning features, potentially utilizing the built-in camera for precise alignment of your design on the material.
6.2 Memulakan Operasi
- Pemeriksaan Keselamatan: Ensure all safety precautions are in place, including wearing safety goggles and confirming proper ventilation.
- Mulakan Kerja: Mulakan proses ukiran atau pemotongan daripada perisian.
- Pemantauan: Continuously monitor the machine during operation. Be prepared to use the emergency stop if any issues arise.
- penyiapan: Once the job is complete, the laser will stop. Wait for any smoke or fumes to clear before opening the protective cover and removing the material.
6.3 Keserasian Bahan
The ATOMSTACK A6 Ultra is compatible with a wide range of materials for engraving and cutting:
- Wood (Basswood, Pine wood, Paulownia, Bamboo)
- Akrilik
- kulit
- Paper, Cardboard
- Fabrik
- Some plastics (ensure they do not produce toxic fumes)
Always perform small test engravings on new materials to determine optimal settings and ensure safe processing.
Rajah 6.1: Tayangan imejcasing the ATOMSTACK A6 Pro laser engraver's versatility in processing different materials, including basswood, acrylic, pine wood, paulownia, bamboo, and leather, suitable for both cutting and engraving.
7. Penyelenggaraan
Penyelenggaraan berkala memastikan jangka hayat dan prestasi optimum pengukir laser anda.
- Membersihkan Lensa: Periodically clean the laser lens with a specialized lens cleaning solution and a lint-free cloth. A dirty lens can reduce laser power and engraving quality.
- Cleaning the Engraving Bed: Remove debris and dust from the engraving bed after each use. A clean bed helps maintain consistent engraving results.
- Pelinciran: Check the guide rails and moving parts for smooth operation. Lubricate as needed with appropriate lubricants to prevent friction and wear.
- Kemas kini Firmware: Check the ATOMSTACK official website for any available firmware updates for your device to ensure you have the latest features and bug fixes.
- Penutup Pelindung: Keep the B3 Dust Cover clean to maintain visibility and ensure its protective properties. The integrated 7500RPM fan helps with efficient ventilation and dust removal.
Rajah 7.1: The ATOMSTACK A6 Pro laser engraver enclosed within its protective cover, illustrating benefits such as noise reduction, fire resistance, efficient ventilation, and dust protection for a safer and cleaner engraving experience.
8. Penyelesaian masalah
Bahagian ini menangani isu biasa yang mungkin anda hadapi dan menyediakan penyelesaian yang berpotensi.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Laser tidak menembak | Power not connected; Emergency stop engaged; Software error; Protective cover open. | Check power connections; Release emergency stop; Restart software/computer; Ensure protective cover is fully closed. |
| Kualiti ukiran yang teruk | Incorrect laser settings (power/speed); Dirty lens; Material not flat; Incorrect focus (though A6 Ultra is fixed focus, ensure material is at correct height). | Adjust laser power/speed in software; Clean laser lens; Ensure material is flat; Verify material height. |
| Mesin tidak bersambung ke komputer | USB cable issue; Driver not installed; Software not recognizing device. | Try a different USB port/cable; Install necessary drivers; Restart software/computer; Check device manager for recognition. |
| Unexpected movement or stopping | Loose cables; Obstruction on rails; Software command error; Limit switch triggered. | Check all cable connections; Clear any obstructions; Restart job; Inspect limit switches for damage or obstruction. |
9. Waranti dan Sokongan
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. ATOMSTACK products typically come with a manufacturer's warranty covering defects in materials and workmanship.
For technical support, troubleshooting assistance beyond this manual, or inquiries about spare parts, please contact ATOMSTACK customer service through their official website or the contact information provided with your product. When contacting support, please have your model number (A6 Ultra / T-A6UH2) and purchase details ready.
