ErGear EGESD8 Electric Standing Desk User Manual

1. Pengenalan

Thank you for choosing the ErGear EGESD8 Electric Standing Desk. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new desk. Please read these instructions carefully before use and retain them for future reference. This electric standing desk is designed to offer ergonomic flexibility, allowing you to easily switch between sitting and standing positions, promoting a healthier work environment.

The ErGear Electric Standing Desk, showcasing its sleek design and spacious desktop in a contemporary workspace.

2. Arahan Keselamatan

Untuk memastikan operasi yang selamat dan mencegah kerosakan, sila patuhi perkara berikut:

• Pastikan semua sambungan selamat sebelum mengendalikan meja.
• Jauhkan kanak-kanak dan haiwan peliharaan dari meja semasa operasi.
• Do not place hands or other body parts near moving parts to avoid injury.
• Jangan bebankan meja secara berlebihan. Kapasiti berat maksimum ialah 80 kg.
• Elakkan meletakkan cecair terus pada panel kawalan atau berhampiran komponen elektrik.
• If the desk makes unusual noises or movements, discontinue use and consult the troubleshooting section or contact support.
• Hanya gunakan penyesuai kuasa dan kabel yang disediakan.

This image highlights the robust construction of the ErGear Electric Standing Desk, capable of supporting up to 80 kg, ensuring stability even under significant load.

3. Kandungan Pakej

Sila pastikan semua komponen ada dan tidak rosak:

• Desktop Panels (assembled)
• Kaki Meja (2)
• Foot Pads (2)
• Kurung Samping (2)
• Crossbar
• Batang Penghantaran
• Panel Kawalan
• Penyesuai Kuasa & Kabel
• Cable Grommets (2)
• Cangkuk Fon Kepala (2)
• Perkakasan Pemasangan (skru, sepana Allen)
• Manual Pengguna

4. Arahan Perhimpunan

Follow these steps to assemble your ErGear Electric Standing Desk. It is recommended to have two people for assembly.

Langkah 1: Pasang Bingkai

1. Attach the side brackets to the desk legs using the provided screws and Allen wrench.
2. Secure the foot pads to the bottom of each leg.
3. Connect the two leg assemblies with the crossbar, ensuring all screws are tightened.

Step 2: Fix the Transmission Rod

1. Insert the transmission rod into the designated openings on both desk legs.
2. Ensure the rod is properly seated and secured with the retaining clips or screws.

Step 3: Assemble the Desktop Panel

1. Lay the desktop panels face down on a soft, clean surface.
2. Align the panels and secure them together using the provided connectors and screws.

Step 4: Attach the Frame to the Desktop

1. Carefully place the assembled desk frame onto the underside of the desktop.
2. Align the pre-drilled holes and secure the frame to the desktop using the appropriate screws.
3. Attach the control panel to the underside of the desktop in a convenient location using the provided screws.
4. Install the headphone hooks to the underside of the desktop as desired.

Langkah 5: Sambungkan Kabel

1. Connect the motor cables from the legs to the control box.
2. Connect the control panel cable to the control box.
3. Connect the power adapter to the control box and then to a power outlet.

Step 6: Fix the Cable Grommets

1. Insert the cable grommets into the pre-cut holes on the desktop to manage cables.

5. Arahan Operasi

Your ErGear Electric Standing Desk features an intuitive control panel for easy height adjustment.

Panel Kawalan Terlaluview

The desk's intelligent control panel features an LED display showing current height in centimeters, along with up/down arrows and four memory preset buttons for quick adjustments.

• Up/Down Arrows (▲ / ▼): Press and hold to adjust the desk height manually.
• Paparan LED: Shows the current height of the desk in centimeters.
• Memory Presets (1, 2, 3, 4): Store and recall preferred height settings.

Melaraskan Ketinggian

The desk can be adjusted between 72 cm dan 118 cm.

• Penyesuaian Manual: Press and hold the up (▲) or down (▼) arrow button until the desk reaches your desired height.
• Menggunakan Pratetap Memori: Press the corresponding memory button (1, 2, 3, or 4) to automatically move the desk to the saved height.

This image demonstrates the adjustable height range of the ErGear Electric Standing Desk, showing a user sitting at 72cm and standing at 118cm, emphasizing ergonomic flexibility.

Menetapkan Pratetap Memori

1. Laraskan meja mengikut ketinggian yang diingini menggunakan anak panah atas/bawah.
2. Press the 'M' button (if available, or a 'Set' button) followed by the desired memory button (1, 2, 3, or 4). The display will typically flash or beep to confirm the setting is saved.

Operasi Senyap

The desk operates with a quiet motor, producing a noise level of ≤ 55 dB, ensuring a peaceful work environment.

Illustrates the ultra-quiet operation of the ErGear Electric Standing Desk, with a noise level of 55dB, ensuring a peaceful and undisturbed work environment.

6. Penyelenggaraan

Regular maintenance helps prolong the life of your desk:

• Pembersihan: Wipe the desk surface and legs with a soft, damp kain. Elakkan bahan kimia yang keras atau pembersih yang kasar.
• Pengurusan Kabel: Periodically check that all cables are neatly organized and not pinched or tangled. Utilize the integrated cable grommets and hooks.
• Screw Tightness: Occasionally check and tighten any loose screws on the frame or desktop connections.
• Pemeriksaan: Inspect the desk for any signs of wear or damage. If any issues are found, contact customer support.

Perincian view of the desk's integrated cable grommets and convenient hooks, designed to help maintain a tidy and organized workspace by managing cables and accessories.

7. Penyelesaian masalah

Jika anda menghadapi sebarang masalah dengan meja anda, sila rujuk masalah dan penyelesaian biasa berikut:

If the problem persists after trying these solutions, please contact ErGear customer support.

8. Spesifikasi

A clear diagram illustrating the overall dimensions of the ErGear Electric Standing Desk, including its 120cm x 60cm desktop and adjustable height range of 72cm to 118cm.

9. Waranti dan Sokongan

ErGear products are designed for durability and performance. This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your package or visit the official ErGear webtapak.

If you have any questions, require technical assistance, or need to report a missing or damaged part, please contact ErGear customer support through the retailer where you purchased the product or via the contact information provided on the official ErGear webtapak.

Please have your model number (EGESD8) and purchase information ready when contacting support.