1. Pengenalan
Thank you for choosing the ErGear Electric Standing Desk EGESD86W. This manual provides detailed instructions for the assembly, operation, and maintenance of your new height-adjustable desk. Please read this manual thoroughly before assembly and use to ensure safe and efficient operation.
Image 1.1: The ErGear Electric Standing Desk EGESD86W in a modern office setup, featuring a white desktop, dual monitors, and a laptop stand.
2. Maklumat Keselamatan
- Pastikan semua komponen ada dan tidak rosak sebelum pemasangan. Jangan gunakan jika mana-mana bahagian hilang atau rosak.
- Jauhkan kanak-kanak dan haiwan peliharaan dari meja semasa operasi untuk mengelakkan kecederaan.
- Do not place hands or other objects near the lifting mechanism while the desk is in motion.
- Pastikan kord kuasa tidak tersepit atau rosak. Putuskan sambungan kuasa sebelum membersihkan atau menyelenggara.
- Do not overload the desk. The maximum weight capacity is 80 kg (176 lbs).
- Operate the desk on a level surface to ensure stability.
- Hanya gunakan penyesuai kuasa yang disediakan.
3. Kandungan Pakej
Please verify that all the following components are included in your package. If any parts are missing, please contact customer support.
- Desktop (Assembled Panel Top, 120 x 60 cm)
- Desk Legs (2 units)
- Foot Pads (2 units)
- Kotak Kawalan
- Smart Control Panel with 4 Memory Presets
- Penyesuai Kuasa dan Kabel
- Cable Management Grommets (2 units)
- Headphone/Bag Hooks (2 units)
- Assembly Hardware (screws, Allen keys, etc.)
- Manual Arahan
4. Persediaan dan Pemasangan
The ErGear Electric Standing Desk is designed for simplified assembly. Follow these steps carefully. All accessories are intelligently numbered for ease of installation.
- Buka Pembungkusan Komponen: Tanggalkan semua bahagian dari pembungkusan dengan berhati-hati dan letakkannya di atas permukaan yang bersih dan lembut untuk mengelakkan calar. Sahkan semua bahagian terhadap senarai kandungan pakej.
- Attach Desk Legs: Secure the desk legs to the desktop using the provided screws and tools. Ensure they are aligned correctly and tightened firmly.
- Pasang Pad Kaki: Attach the foot pads to the bottom of the desk legs.
- Mount Control Box: Secure the control box to the underside of the desktop in the designated area.
- Sambung Panel Kawalan: Connect the smart control panel to the control box. Mount the control panel to the front edge of the desk.
- Install Cable Management & Hooks: Insert the cable management grommets into the pre-drilled holes on the desktop. Attach the headphone/bag hooks to the underside of the desk as desired.
- Sambungkan Kuasa: Plug the power adapter into the control box, then connect it to a power outlet.
- Penentukuran Awal: After connecting power, the desk may require an initial calibration. Refer to the "Operating Instructions" section for details on calibration.
Image 4.1: Diagram illustrating the dimensions of the ErGear Electric Standing Desk, showing a desktop size of 120cm x 60cm and an adjustable height range of 72cm to 118cm.
Imej 4.2: Jarak dekat view of the desk's integrated cable management grommets and convenient hooks for headphones or bags, designed to keep the workspace organized.
5. Arahan Operasi
5.1 Panel Kawalan Selesaiview
The smart control panel allows for easy height adjustment and saving preferred positions.
Imej 5.1: Terperinci view of the ErGear smart control panel, showing the LED height display, up/down arrows, and four memory preset buttons (1, 2, 3, 4).
- Anak Panah Atas/Bawah (∧ / ∨): Press and hold to adjust the desk height manually. Release to stop.
- Paparan led: Menunjukkan ketinggian meja semasa dalam sentimeter.
- Pratetap Memori (1, 2, 3, 4): Store and recall your preferred sitting and standing heights.
5.2 Melaraskan Ketinggian
- Tekan dan tahan butang ∧ (Up) butang untuk menaikkan meja.
- Tekan dan tahan butang ∨ (Down) butang untuk menurunkan meja.
- Release the button at your desired height. The desk operates smoothly and quietly (≤ 55 dB).
Image 5.2: Illustration of the desk's height transition, showing a user sitting at 72cm and another standing at 118cm, demonstrating the ergonomic flexibility.
5.3 Menetapkan Pratetap Memori
- Laraskan meja mengikut ketinggian yang diingini menggunakan anak panah atas/bawah.
- Tekan ke "M" button. The LED display will show "S-".
- Dalam masa 3 saat, tekan salah satu butang nombor (1, 2, 3, atau 4) to save the current height to that preset. The display will show the number you pressed, confirming the setting.
5.4 Mengingat semula Pratetap Memori
- Simply press the desired number button (1, 2, 3, atau 4Meja akan bergerak secara automatik ke ketinggian yang disimpan.
5.5 Initializing/Resetting the Desk
If the desk is not responding correctly or displays an error code, a reset may be required.
- Tekan dan tahan butang ∨ (Down) button until the desk reaches its lowest position and then slightly rises. Continue holding until the display shows "RST" or "E-01" and then returns to the lowest height.
- Release the button. The desk is now reset and ready for use.
6. Penyelenggaraan
- Pembersihan: Wipe the desk surface and legs with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals. Ensure the power is disconnected before cleaning.
- Pengurusan Kabel: Regularly check and organize cables to prevent tangles and damage.
- Pemeriksaan: Periksa semua skru dan sambungan secara berkala untuk memastikan ia ketat. Ketatkan semula jika perlu.
- Had Berat: Do not exceed the maximum weight capacity of 80 kg (176 lbs) to prevent damage to the motor and frame.
Image 6.1: A person sitting on the desk, illustrating its robust 80 kg weight capacity, highlighting the desk's stability and durability.
7. Penyelesaian masalah
If you encounter any issues with your ErGear Electric Standing Desk, please refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Meja tidak bergerak. | Kabel kuasa terputus, ralat motor, beban lampau. | Check power connections. Perform a reset (Section 5.5). Reduce weight on the desk. |
| Meja bergerak tidak sekata atau mengeluarkan bunyi yang luar biasa. | Loose connections, obstruction, motor issue. | Check all assembly screws. Ensure no obstructions. Perform a reset. If problem persists, contact support. |
| Error code displayed (e.g., "E-01", "RST"). | System error, need for calibration. | Perform a reset/initialization as described in Section 5.5. |
| Pratetap memori tidak berfungsi. | Pratetap tidak disimpan dengan betul. | Re-save the memory presets following instructions in Section 5.3. |
If the issue persists after attempting these solutions, please contact ErGear customer support for further assistance.
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | ErGear |
| Nombor Model | EGESD86W |
| warna | putih |
| Dimensi Produk (L x W x H) | 120 x 60 x 72 cm (lowest height) |
| Julat Ketinggian Boleh Laras | 72 sm - 118 sm |
| bahan | Metal frame, Assembled Panel Top |
| Kapasiti Berat | 80 kg (176 lbs) |
| Berat Barang | 19.05 kg |
| Ciri Khas | Ergonomic, Electric Height Adjustment, 4 Memory Presets, Quiet Motor (≤ 55 dB) |
| Negara Asal | China |
9. Waranti dan Sokongan
ErGear products are designed for durability and performance. For warranty information or technical support, please contact ErGear customer service through the retailer where you purchased the product or visit the official ErGear website. Please have your model number (EGESD86W) and purchase details ready when contacting support.
Polisi Pemulangan: This product typically comes with a 30-day refund/replacement policy from the date of purchase. Please refer to your retailer's specific return policy for details.
