1. Pengenalan
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Solax Power X1-Boost-3.0-G3 grid-tied solar inverter. This device is designed to convert direct current (DC) electricity generated by solar panels into alternating current (AC) electricity for household consumption or export to the electrical grid. Please read this manual thoroughly before installation and retain it for future reference.
Key features of the X1-Boost-3.0-G3 include:
- Pengoptimuman Tenaga: Equipped with 2 Maximum Power Point Trackers (MPPTs) to manage multiple solar panel orientations and optimize energy production.
- Kebolehpercayaan yang tinggi: Engineered for durability and stable operation, incorporating integrated protections for safe and continuous performance.
- Pemantauan Jauh: Connectivity options enable convenient monitoring and management of the solar system from various locations.
2. Maklumat Keselamatan
Strict adherence to all safety instructions is mandatory to prevent electric shock, fire, injury, or damage to the inverter. Only qualified and authorized personnel should perform installation and maintenance procedures.
BAHAYA!
- Vol tinggitages are present within the inverter. All work must be carried out by a qualified electrician.
- This appliance is not intended for use by children or persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
- Kanak-kanak harus diawasi untuk memastikan mereka tidak bermain dengan perkakas.
AWAS!
- Risk of burn injuries due to hot enclosure parts. During operation, the upper lid and body of the enclosure may become hot. Only touch the lower enclosure lid during operation.
- Possible damage to health as a result of radiation effects. Do not stay closer than 20 cm to the inverter for any length of time.
AMARAN!
- Do not operate the inverter when the device is running abnormally.
- Risiko renjatan elektrik!
- Vol berbahayatage will be present for up to 5 minutes after disconnection from the power supply.
- Pastikan input DC voltage is below the maximum DC voltage specified. Overvoltage can cause permanent damage to the inverter and other losses, which are not covered by warranty.
- Authorized service personnel must disconnect both AC and DC power from the X1 series inverter before attempting any maintenance, cleaning, or work on connected circuits.
NOTA!
- Grounding the PV generator is essential. Comply with local requirements for grounding PV modules and the PV generator. Solax recommends connecting the generator frame and other electrically conductive surfaces to ensure continuous conduction and proper grounding for optimal system and personal protection.
Garis Panduan Keselamatan Am:
- Read this entire manual carefully before installation and operation. Keep it for future reference.
- Use only attachments recommended or sold by Solax. Using unapproved attachments may result in fire, electric shock, or injury.
- Ensure existing wiring is in good condition and appropriately sized.
- Do not disassemble any parts of the inverter not mentioned in the installation guide. It contains no user-serviceable parts. Attempting to service the inverter yourself will void the warranty and may result in electric shock or fire.
- Keep the inverter away from flammable or explosive materials.
- The installation location should be free from humidity and corrosive substances.
- Kakitangan perkhidmatan yang diberi kuasa mesti menggunakan alat terlindung semasa memasang atau bekerja dengan peralatan ini.
- PV modules must have an IEC 61730 Class A rating.
- Never touch both the positive and negative poles of the PV connecting device simultaneously.
- Unit ini mengandungi kapasitor yang kekal dicas ke vol yang berpotensi mauttage even after the MAINS and PV supply have been disconnected. Always wait 5 minutes after switching off PV and Mains before unplugging DC and MAINS couplers.
- When accessing the internal circuit, wait 5 minutes for capacitors to discharge. Measure the voltage between UDC+ and UDC- terminals with a multi-meter (impedance at least 1Mohm) to confirm total discharge.
Image: Detailed safety warnings and precautions for the Solax Power X1-Boost-3.0-G3 inverter, emphasizing high voltage risks, qualified personnel requirements, and proper handling procedures.
3. Produk Lebihview
The Solax Power X1-Boost-3.0-G3 inverter features a compact and robust design, optimized for residential solar installations. Its intuitive interface allows for easy monitoring and control.
Imej: Depan view of the Solax Power X1-Boost-3.0-G3 solar inverter, showcasing putihnya casing dan paparan digital.
Image: The Solax Power X1-Boost-3.0-G3 inverter with callouts for 3.0kW power, 2 MPPTs, and 14A input current.
3.1 Ciri-ciri Utama
- Prestasi Unggul: Features 150% oversizing and 110% overload capacity, with a 14A DC input per string.
- Mesra Pengguna: Offers optional 24-hour monitoring and maintenance, designed for easy installation and configuration.
- Guaranteed Reliability and Security: Includes optional integrated Type III AC/DC Surge Protection Device (SPD), overheating protection, and an integrated export control function.
Image: Visual representation of the Solax Power X1-Boost-3.0-G3 inverter's key features, including superior performance, user-friendliness, and guaranteed reliability.
4. Pemasangan dan Persediaan
Installation of the Solax Power X1-Boost-3.0-G3 inverter must be performed by a qualified electrician in accordance with all local and national electrical codes and regulations.
4.1 Pemasangan
Select a suitable mounting location that is:
- Terlindung daripada cahaya matahari langsung, hujan, dan suhu yang melampau.
- Well-ventilated to ensure proper heat dissipation.
- Accessible for maintenance but secure from unauthorized access.
- Away from flammable or explosive materials.
4.2 Sambungan Elektrik
The inverter requires connections for:
- Input DC: From the solar PV array. Ensure correct polarity and voltage peringkat.
- Keluaran AC: To the electrical grid or household load.
- Pembumian: Proper grounding of the inverter and PV array is critical for safety.
Refer to the detailed wiring diagrams provided in the full installation guide for specific connection instructions.
4.3 Connectivity and Monitoring
The inverter supports remote monitoring capabilities. This typically involves connecting the inverter to a local network (e.g., Wi-Fi or Ethernet) to transmit performance data to a dedicated online portal or mobile application. This allows for 24-hour monitoring of energy production and system status.
Imej: Selesaiview of advanced features for the Solax Power X1-Boost-3.0-G3, including remote updates, high oversizing/overload, built-in safety, and comprehensive monitoring.
5. Operasi
Once installed and connected, the Solax Power X1-Boost-3.0-G3 inverter will automatically begin operation when sufficient solar power is available and grid conditions are met. The integrated display provides real-time information on system performance.
5.1 Memulakan Penyongsang
- Ensure all DC and AC connections are secure and correctly wired.
- Switch on the DC isolator switch (if present) for the PV array.
- Switch on the AC circuit breaker for the inverter.
- The inverter will perform a self-test and then begin converting solar energy.
5.2 Pemantauan Prestasi
The inverter's front panel display shows operational data such as current power output, daily energy yield, and system status. For more detailed monitoring, utilize the remote monitoring platform accessible via web atau aplikasi mudah alih.
6. Penyelenggaraan
Regular maintenance ensures the longevity and optimal performance of your Solax Power X1-Boost-3.0-G3 inverter. Always disconnect both AC and DC power supplies and wait 5 minutes before performing any maintenance.
6.1 Pemeriksaan Rutin
- Pemeriksaan Visual: Periodically check the inverter for any visible damage, corrosion, or loose connections.
- Pembersihan: Pastikan bukaan pengudaraan inverter bersih daripada habuk dan serpihan untuk memastikan penyejukan yang betul. Gunakan kain lembut dan kering untuk membersihkan bahagian luar. Jangan gunakan cecair atau pembersih yang kasar.
- Integriti Kabel: Inspect all cables for signs of wear, damage, or degradation.
6.2 Penyelenggaraan Profesional
It is recommended to have the inverter inspected by a qualified technician at least once every few years to ensure all components are functioning correctly and to perform any necessary firmware updates.
7. Penyelesaian masalah
This section provides basic troubleshooting steps for common issues. For complex problems, contact qualified service personnel.
7.1 Isu dan Penyelesaian Biasa
- Inverter Not Producing Power:
- Check if the DC isolator and AC circuit breaker are switched ON.
- Verify that solar panels are receiving sufficient sunlight.
- Check for any error messages on the inverter display or monitoring platform.
- Error Message Displayed:
- Note down the error code. Refer to the full user manual or contact technical support with the code for specific guidance.
- Attempt a system restart by switching off AC and DC power, waiting 5 minutes, then switching them back on.
- Output Kuasa Rendah:
- Ensure solar panels are clean and free from shading.
- Check for any loose or damaged DC connections.
- Verify that the inverter's ventilation is not obstructed.
If the issue persists after attempting these steps, contact Solax Power technical support or your installer.
8. Spesifikasi
The following table outlines the technical specifications for the Solax Power X1-Boost-3.0-G3 solar inverter.
Image: Technical specifications for the Solax Power X1-Boost-3.0-G3 inverter, detailing electrical parameters and operating conditions.
| Atribut | Nilai |
|---|---|
| Jenama | Solax Power (Distributed by Solitia) |
| Nama Model | X1-Boost-3.0-G3 |
| Nombor Model (Artikel) | GRI0034 |
| kuasa | 3 KW |
| Voltage | 230 Volt |
| Input Voltage (AC) | 230 Volt |
| Maks. Input PV Voltage | 600V |
| Maks. Arus Input PV | 14A/14A |
| Bilangan Penjejak MPPT | 2 |
| Strings per MPPT Tracker | 1 |
| Julat Suhu Ambien Operasi | -25°C hingga +60°C |
| warna | putih |
| Dimensi (L x W x H) | 43.9 cm x 51.4 cm x 23.3 cm (17.3 in x 20.2 in x 9.2 in) |
| Berat badan | 13.5 kg (29.7 lbs) |
| Penggunaan yang Disyorkan | Rumah |
| Sumber Kuasa | Tenaga Suria |
| Total Number of Power Outlets | 1 |
| Ketersediaan Alat Ganti | 3 Tahun |
| Kemas Kini Perisian Dijamin Sehingga | Maklumat tidak tersedia |
Image: Physical dimensions and weight of the Solax Power X1-Boost-3.0-G3 inverter, indicating its compact size.
9. Waranti dan Sokongan
The Solax Power X1-Boost-3.0-G3 inverter is designed for reliability and comes with a commitment to quality. Spare parts are available for a period of 3 years from the date of purchase.
For detailed warranty terms and conditions, please refer to the official warranty document provided with your product or visit the Solax Power webtapak. Waranti biasanya meliputi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa.
For technical support, service requests, or further inquiries, please contact your authorized Solax Power distributor or installer. Ensure you have your product model number (X1-Boost-3.0-G3) and serial number ready when contacting support.
