M5Stack K132

M5Stack Cardputer Kit User Manual

Model: K132 | Brand: M5Stack

pengenalan

The M5Stack Cardputer Kit is a card-sized portable computer designed for engineers and enthusiasts. It features the M5StampS3 development board, based on the ESP32-S3 chip, offering a powerful dual-core processor and Wi-Fi capabilities. This compact device integrates a 56-key keyboard, a 1.14-inch TFT screen, a digital MEMS microphone, and a built-in speaker, making it suitable for rapid functional verification, industrial control, and home automation systems. It also includes an infrared emitter for external device control and a HY2.0-4P interface for expanding I2C sensors. Storage can be expanded via a Micro SD card slot. The Cardputer is powered by an internal 120mAh battery and an additional 1400mAh battery in the base, with integrated charging and voltage regulation circuits. Its base incorporates a magnet and is compatible with building brick hole extensions for creative designs.

Ciri-ciri Utama

Produk Selesaiview

M5Stack Cardputer Kit

The M5Stack Cardputer Kit, a compact development device with a keyboard and screen.

M5Stack Cardputer Kit Components Diagram

Detailed diagram highlighting key components: 1.14" IPS-LCD, 1400mAh battery, magnet, speaker, 120mAh internal battery, 56-key keyboard, and various ports.

M5Stack Cardputer Kit Back View with Pinout

belakang view of the Cardputer showing the pinout diagram for the ESP32-S3, IPS-LCD, and various interfaces including WiFi, keys, speaker, microphone, IR, Grove, and battery connections.

M5Stack Cardputer Kit Side View with Grove Port

sebelah view of the Cardputer, highlighting the Grove port (G 5V, G2, G1) and 5V input/output connections.

M5Stack Cardputer Kit Side View with USB-C Port

sebelah view of the Cardputer, showing the USB-C port for power and data transfer, along with speaker grilles.

M5Stack Cardputer Kit Top View papan kekunci

Atas ke bawah view of the Cardputer's 56-key QWERTY keyboard, including function keys and special characters.

M5Stack Cardputer Kit Rear View with SD Card Slot

belakang view of the Cardputer, showing the Micro SD card slot, power switch (OFF/ON), reset button (BtnRst), and infrared emitter (IR G44).

Persediaan

  1. mengecas: Connect the Cardputer to a 5V USB-C power source using the USB-C port on the side. The device has built-in battery charging and voltage litar peraturan.
  2. Hidupkan/Mati Kuasa: Locate the power switch on the rear of the device and slide it to the 'ON' position to power on. Slide to 'OFF' to power off.
  3. Pemasangan Kad SD Mikro: Insert a FAT32 formatted Micro SD card into the Micro SD card slot on the rear of the device for expanded storage. Ensure it clicks into place.
  4. But Permulaan: Upon first power-on, the device may display a default application or require firmware flashing. Refer to M5Stack's official documentation for specific firmware installation instructions.

Operating the Cardputer

Penggunaan Papan Kekunci

The Cardputer features a 56-key QWERTY keyboard. Standard typing functions are available. Special characters and functions may be accessed using the 'Fn' key in combination with other keys, as indicated by the keycap legends.

Display Interaction

The 1.14-inch TFT screen displays information from the running applications. Navigation and interaction with on-screen elements are typically performed via the keyboard or programmed inputs.

Audio dan Mikrofon

The built-in cavity speaker allows for audio playback. The SPM1423 digital MEMS microphone supports voice operations such as recording and wake-up functions, depending on the loaded firmware.

Kawalan Inframerah

The integrated infrared emitter enables control of external devices like TVs or air conditioners, provided the appropriate IR codes are programmed into the Cardputer.

Expanding Functionality (HY2.0-4P Port)

The HY2.0-4P port allows for the connection of I2C sensors, such as temperature, humidity, light, or pressure sensors. This port expands the device's capabilities for various projects and applications.

Penyelenggaraan

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Peranti tidak dihidupkan.Low battery; Power switch off; Firmware issue.Charge the device; Ensure power switch is ON; Attempt to re-flash firmware if necessary.
Kad mikro SD tidak dikesan.Incorrect format; Improper insertion; Card fault.Ensure card is FAT32 formatted; Re-insert card firmly; Try a different Micro SD card.
Skrin kosong atau tidak responsif.Firmware error; Hardware malfunction.Perform a hard reset (using the reset button); Re-flash firmware. If problem persists, contact support.
Isu sambungan Wi-Fi.Incorrect network settings; Signal interference.Verify Wi-Fi credentials; Ensure device is within range of Wi-Fi source; Check for firmware updates related to Wi-Fi.

Spesifikasi

Waranti dan Sokongan

For warranty information and technical support, please refer to the official M5Stack webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan resit pembelian anda untuk tuntutan waranti.

Sumber Dalam Talian: M5Stack Official Webtapak

Dokumen Berkaitan - K132

Praview M5Stack Cardputer V1.1: Panduan Komputer Mudah Alih dan Platform Pembangunan
Panduan komprehensif untuk M5Stack Cardputer v1.1, sebuah komputer mudah alih berprestasi tinggi untuk jurutera dan pembangun. Ciri-ciri StampPengawal S3A, papan kekunci 56 kekunci, skrin TFT 1.14 inci, mikrofon MEMS dan sambungan yang meluas. Termasuk arahan persediaan, Soalan Lazim, spesifikasi dan butiran platform pembangunan.
Praview Panduan Pengguna M5Stack Cardputer V1.1 dan Perisian Tegar Berkelip
Panduan komprehensif untuk M5Stack Cardputer V1.1, meliputi flash firmware kilang, menyelesaikan masalah biasa seperti skrin hitam dan pemasangan pemacu USB menggunakan M5Burner. Ketahui cara menyediakan, memasang pemacu, memilih port dan membakar perisian tegar untuk peranti anda.
Praview M5STACK Cardputer: Komputer Pembangunan ESP32-S3 Mudah Alih
Terokai M5STACK Cardputer, komputer pembangunan yang padat dan serba boleh yang menampilkan cip ESP32-S3FN8, papan kekunci 56 kekunci, skrin TFT dan sambungan yang meluas untuk prototaip pantas dan projek terbenam.
Praview M5STACK STAMPLembaran Data S3 dan Spesifikasi Teknikal
Terokai M5STACK STAMPPapan pembangunan S3, menampilkan cip ESP32-S3 dengan Wi-Fi dan Bluetooth 5 (LE). Lembaran data ini memperincikan komposisi perkakasannya, perihalan pin, keupayaan berfungsi dan ciri elektrik untuk projek IoT.
Praview M5STACK Dinmeter: Product Overview dan Panduan Mula Pantas
Comprehensive guide to the M5STACK Dinmeter, an embedded development board powered by M5StampS3. Features include a 1.14-inch screen, rotary encoder, and extensive connectivity. Learn about its specifications and how to perform WiFi and BLE scans with Arduino IDE.
Praview Papan Pembangunan M5Stack AtomS3-Lite ESP32-S3
Terokai M5Stack AtomS3-Lite, papan pembangunan ESP32-S3 padat yang menampilkan Wi-Fi, antena bersepadu dan antara muka serba boleh untuk projek IoT dan mikropengawal. Ketahui tentang spesifikasi, ciri dan pilihan pembangunannya dengan Arduino IDE dan UiFlow2.