1. Pengenalan
This manual provides detailed instructions for the setup, operation, and maintenance of your XUANZIT LLR104 Digital Alarm Clock. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Figure 1: XUANZIT LLR104 Digital Alarm Clock. This image displays the front of the clock with its green LED display showing the time 10:24 PM, and the control buttons below the display.
Ciri-ciri produk:
- Dimmable LED Display: Ultra-clear display with 6 levels of brightness.
- Loud Alarm: 5-level adjustable buzzer volume (65 to 85 dB).
- Plug-in Electric: Powered via USB-C connector.
- Memory Function: 2xAAA battery backup preserves time and settings during power outages.
- Simple Operation: All primary buttons located on the front for ease of use.
- Time Format: Switchable 12/24-hour display.
- Snooze Function: Adjustable snooze time from 1 to 15 minutes.
2. Persediaan
2.1 Sambungan Kuasa
- Connect the provided USB-C cable to the USB-C port on the back of the alarm clock.
- Plug the other end of the USB-C cable into a compatible USB power adapter (not always included) and then into a wall outlet. The clock display will illuminate.
- For memory backup, open the battery compartment on the back of the clock and insert 2 AAA batteries (not included). These batteries will preserve time and alarm settings in case of a power interruption, but will not power the display.
Figure 2: Power and Battery Backup. This image shows the rear of the clock, highlighting the Universal USB-C Connector for power input and the 2 x AAA Battery Compartment for memory function.
2.2 Penetapan Masa Awal
- Tekan dan tahan "Time-Set" button (labeled "12/24hr Time-Set") located on the front of the clock. The hour digits will begin to flash.
- Gunakan "+" atau "-" buttons to adjust the hour. Pay attention to the PM indicator if using 12-hour format.
- Tekan butang "Time-Set" button again to switch to minute adjustment. The minute digits will flash.
- Gunakan "+" atau "-" butang untuk melaraskan minit.
- Tekan butang "Time-Set" button a third time to confirm the time setting and exit time setting mode.
3. Arahan Operasi
Figure 3: Front Panel Controls. This image highlights the five control buttons on the front of the clock: 12/24hr Time-Set, ON/OFF AL-Set, SNOOZE, -, and +.
3.1 Menetapkan Format 12/24 Jam
To switch between 12-hour and 24-hour time display, briefly press the "Time-Set" button (labeled "12/24hr Time-Set") when not in time setting mode. The PM indicator will appear for 12-hour format (PM only, AM is implied by absence of PM).
Figure 4: 12Hr and 24Hr Time Formats. This image illustrates the clock displaying time in both 12-hour format (10:24 PM) and 24-hour format (22:24).
3.2 Menetapkan Penggera
- Tekan dan tahan "AL-Set" button (labeled "ON/OFF AL-Set"). The alarm hour digits will begin to flash, and an alarm icon (bell symbol) will appear on the display.
- Gunakan "+" atau "-" buttons to adjust the alarm hour.
- Tekan butang "AL-Set" button again to switch to alarm minute adjustment. The alarm minute digits will flash.
- Gunakan "+" atau "-" buttons to adjust the alarm minutes.
- Tekan butang "AL-Set" button a third time to confirm the alarm setting. The alarm icon will remain on, indicating the alarm is active.
3.3 Menghidupkan/Mematikan Penggera
Briefly press the "AL-Set" button (labeled "ON/OFF AL-Set") when not in alarm setting mode to toggle the alarm on or off. The alarm icon will appear when the alarm is active and disappear when it is off.
3.4 Melaraskan Kelantangan Penggera
When the alarm is sounding, press the "+" atau "-" buttons to cycle through the 5 available buzzer volume levels (65dB to 85dB). The selected volume will be saved for future alarms.
Figure 5: Adjustable Alarm Volume. This image shows the clock with an overlay indicating 5 levels of buzzer volume, ranging from Quiet (65dB) to Extra Loud (85dB).
3.5 Melaraskan Kecerahan Paparan
Briefly press the "MENGEJUTKAN" button when the alarm is not sounding to cycle through the 6 levels of LED display brightness. Select the brightness level that suits your preference.
Figure 6: Dimmable LED Display. This image demonstrates the clock's display at various brightness levels, from very dim to very bright.
3.6 Fungsi Tunda
When the alarm sounds, press the "MENGEJUTKAN" button to temporarily silence the alarm. The alarm will sound again after the preset snooze duration. The default snooze duration is 9 minutes. To adjust the snooze duration (1-15 minutes):
- While the alarm is sounding, press and hold the "MENGEJUTKAN" button. The snooze duration will flash.
- Gunakan "+" atau "-" buttons to set your desired snooze duration (1-15 minutes).
- Briefly press the "MENGEJUTKAN" button again to confirm the setting and activate snooze.
To turn off the alarm completely when it is sounding, press any button other than "MENGEJUTKAN" (e.g., "ON/OFF AL-Set", "Time-Set", "+", or "-").
4. Penyelenggaraan
4.1 Pembersihan
- Ensure the clock is unplugged from the power source before cleaning.
- Wipe the clock's surface with a soft, dry, or slightly damp kain.
- Jangan gunakan pembersih, pelarut atau semburan kimia yang kasar, kerana ini boleh merosakkan kemasan atau komponen dalaman.
4.2 Battery Replacement (Backup)
- If the clock frequently loses time or settings during brief power interruptions, the AAA backup batteries may need replacement.
- Unplug the clock from the main power source.
- Buka petak bateri di belakang jam.
- Remove the old AAA batteries and insert two new AAA batteries, ensuring correct polarity (+/-).
- Close the battery compartment and reconnect the clock to its power source.
5. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Paparan jam dimatikan. | Tiada bekalan kuasa. | Ensure the USB-C cable is securely connected to the clock and a working power adapter/outlet. |
| Clock loses time/settings after power outage. | Bateri sandaran mati atau tidak dipasang. | Pasang 2 bateri AAA baharu atau gantikan yang sedia ada di dalam petak bateri. |
| Penggera tidak berbunyi. | Penggera tidak diaktifkan atau kelantangan terlalu rendah. | Ensure the alarm icon is visible on the display. Adjust alarm volume using the '+' or '-' buttons when the alarm is sounding. |
| Paparan terlalu terang/malap. | Tahap kecerahan perlu diselaraskan. | Briefly press the "SNOOZE" button to cycle through brightness levels. |
| Tidak boleh menetapkan masa/penggera. | Not in setting mode or buttons not responding. | Press and hold "Time-Set" or "AL-Set" until digits flash. If unresponsive, unplug and replug the clock to reset. |
6. Spesifikasi
- model: LLR104 (XZT104G)
- Jenama: XUANZIT
- Jenis Paparan: LED
- Sumber Kuasa: USB-C (Input: DC 5V)
- Bateri Sandaran: 2 x AAA (not included, for memory function only)
- Kelantangan Penggera: 5 levels, 65-85 dB
- Kecerahan Paparan: 6 peringkat
- Tempoh Tunda: Adjustable 1-15 minutes
- Format Masa: 12/24 hour switchable
- Bahan: plastik
- Dimensi Produk: Kira-kira 3.56 x 3.81 x 7.62 cm (1.4 x 1.5 x 3 inci)
- Berat Barang: Kira-kira 99.79 g (3.52 oz)
7. Sokongan Pelanggan
For any questions, concerns, or technical assistance regarding your XUANZIT LLR104 Digital Alarm Clock, please refer to the retailer's customer service channels or visit the official XUANZIT webtapak untuk maklumat sokongan.
Sila simpan manual ini untuk rujukan masa hadapan.