Aigo Q2503 Mini-Tower PC Case User Manual

1. Pengenalan

Thank you for choosing the Aigo Q2503 Mini-Tower PC Case. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new computer chassis. Please read this guide thoroughly before beginning assembly to ensure optimal performance and longevity of your system components.

2. Produk Lebihview

The Aigo Q2503 is a compact Mini-Tower PC case designed for M-ATX and ITX motherboards. It offers a streamlined design with essential features for building a functional and efficient computer system. Its robust construction provides a secure environment for your components.

Rajah 2.1: Bahagian hadapan view of the Aigo Q2503 Mini-Tower PC Case, showcasing its compact design and front panel I/O ports.

Rajah 2.2: Depan view of the Aigo Q2503 Mini-Tower PC Case, highlighting the vertical ventilation slats and front panel controls.

3. Persediaan dan Pemasangan

Follow these steps for proper component installation within the Aigo Q2503 case.

3.1 Menyediakan Kes

1. Unpack the case and remove all packaging materials.
2. Carefully remove the side panels by unscrewing the thumbscrews at the rear of the case and sliding the panels backward.

Gambar 3.1: Dalaman view of the Aigo Q2503 PC Case, showing the motherboard tray and drive mounting points.

3.2 Pemasangan Motherboard

1. Install the I/O shield provided with your motherboard into the rear opening of the case.
2. Align your M-ATX or ITX motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. Pasangkan papan induk dengan skru yang sesuai.

3.3 Pemasangan Drive

• SSD (1x): Locate the dedicated SSD mounting point (typically on the motherboard tray or behind it). Secure the SSD using screws.
• HDD (1x): Locate the HDD bay. Slide the HDD into the bay and secure it with screws.

3.4 Expansion Card Installation (VGA)

1. Tanggalkan penutup slot pengembangan yang diperlukan dari bahagian belakang bekas.
2. Insert your graphics card (VGA) or other expansion cards into the PCIe slots on your motherboard.
3. Secure the expansion cards with screws. Note the maximum VGA length supported is 150 mm.

3.5 Pemasangan Penyejuk CPU

Install your CPU cooler according to its manufacturer's instructions. Ensure the cooler's height does not exceed the maximum supported height of 250 mm for this case.

3.6 Pemasangan Bekalan Kuasa

The Aigo Q2503 supports ATX power supplies. Mount your ATX power supply in the designated area, typically at the top or bottom rear of the case, and secure it with screws.

3.7 Pemasangan Kipas

The case supports the following fan configurations (fans are not included):

• belakang: 1 x 80 mm fan
• sisi: 1 x 120 mm fan

Install fans in the specified locations to optimize airflow.

3.8 Sambungan Panel Hadapan

Connect the front panel cables (Power SW, Reset SW, HDD LED, Power LED, USB 2.0, Audio/Mic) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

4. Mengendalikan Casing PC Anda

Once all components are installed and connected, replace the side panels and secure them. Connect your monitor, keyboard, mouse, and power cable to your system. Press the power button on the front panel to start your computer.

Panel hadapan menyediakan akses mudah kepada:

• Butang Kuasa
• Butang Tetapkan Semula
• 2 x Port USB 2.0
• Audio Out (Headphone) Jack
• Mikrofon Dalam Jack

5. Penyelenggaraan

Penyelenggaraan tetap membantu memastikan prestasi optimum dan memanjangkan jangka hayat komponen PC anda.

5.1 Pembersihan

• Luaran: Gunakan yang lembut, damp kain untuk mengelap permukaan luar. Elakkan pembersih yang kasar.
• Dalaman: Periodically open the case and use compressed air to remove dust buildup from components, fans, and filters. Ensure the system is powered off and unplugged before cleaning the interior.

5.2 Aliran Udara

Ensure that the case's ventilation openings are not obstructed to maintain proper airflow and prevent overheating.

6. Penyelesaian masalah

Jika anda menghadapi masalah dengan binaan PC anda, pertimbangkan langkah penyelesaian masalah umum berikut:

• Tiada Kuasa: Double-check all power connections, including the power supply to the wall, the power supply to the motherboard, and the front panel power switch cable to the motherboard.
• Terlalu panas: Verify that all case fans and CPU cooler fans are spinning correctly. Ensure proper airflow within the case and that ventilation openings are clear.
• Port Panel Hadapan Tidak Berfungsi: Confirm that the USB and Audio/Mic cables from the front panel are correctly connected to the motherboard headers.
• Isu-isu Padanan Komponen: Ensure that all components, especially the graphics card and CPU cooler, are within the specified maximum dimensions for the case.

7. Spesifikasi

Below are the detailed specifications for the Aigo Q2503 Mini-Tower PC Case:

8. Maklumat Waranti

The Aigo Q2503 Mini-Tower PC Case comes with a manufacturer's warranty of 12 bulan from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, accidents, modifications, or unauthorized repairs.

9. Sokongan

For technical assistance, troubleshooting, or warranty inquiries, please contact your retailer or the official Aigo support channels. Refer to the Aigo official webtapak untuk maklumat hubungan dan sumber sokongan yang paling terkini.

Before contacting support, please have your product model (Q2503-BK) and proof of purchase readily available.