BITFENIX Fang ARGB Medium Tower Computer Case Black

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your BITFENIX Fang ARGB Medium Tower Computer Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance. The Fang ARGB case features an elegant design with a mesh front panel, a tempered glass side window, and four pre-installed Addressable RGB (ARGB) fans, offering compatibility with motherboard RGB synchronization for a personalized lighting experience.

2. Ciri-ciri Utama

• Reka Bentuk Elegan: Mesh front panel and tempered glass side window for aesthetics and component visibility.
• Pre-installed ARGB Fans: Four 120mm ARGB fans included for enhanced cooling and customizable lighting.
• Keserasian Papan Induk: Supports ATX, Micro-ATX, and Mini-ITX motherboards.
• Ample Component Support: Accommodates graphics cards up to 360mm and CPU coolers up to 163mm.
• Penyejukan yang cekap: Designed for excellent airflow with support for multiple fan and radiator configurations.
• Convenient I/O: Top-mounted panel with 2x USB 3.0, 1x USB 2.0, audio ports, and LED/Reset button.
• Pengurusan Kabel: Up to 26mm (1.0 inch) of space behind the motherboard tray for tidy cable routing.
• Pilihan Storan: Multiple drive bays for 3.5" and 2.5" drives.

3. Arahan Persediaan

Follow these steps to assemble your computer system within the BITFENIX Fang ARGB case.

3.1. Prepare the Case

1. Carefully unpack the case and remove all packaging materials.
2. Letakkan bekas di atas permukaan yang stabil dan rata.
3. Remove the tempered glass side panel by unscrewing the thumb screws at the rear of the case and gently pulling the panel away.
4. Remove the solid side panel (opposite the tempered glass) by unscrewing the thumb screws and sliding the panel backward.

3.2. Install the Motherboard

The case supports Mini-ITX, Micro-ATX, and ATX motherboards. Ensure standoffs are correctly aligned for your motherboard size.

Image: Illustrates motherboard compatibility (ATX, Micro-ATX, Mini-ITX) and maximum VGA length support of 360mm (14.1 inches).

1. Install the I/O shield (if not pre-attached to your motherboard) into the rear I/O opening of the case.
2. Align your motherboard with the pre-installed standoffs. If your motherboard requires different standoff positions, adjust them accordingly.
3. Selamatkan papan induk menggunakan skru yang disediakan.

3.3. Install the Power Supply Unit (PSU)

Bekalan kuasa dipasang di bahagian bawah bekas.

Image: Shows the space-efficient interior with locations for 3.5" and 2.5" drives, and the power supply unit (ATX & Standard / up to 200mm).

1. Luncurkan PSU ke dalam petak yang ditetapkan di bahagian bawah belakang sarung.
2. Pasangkan PSU pada bekas menggunakan skru yang disediakan bersama bekalan kuasa anda.

3.4. Install Storage Drives

The case supports 1x 3.5" drive or 2x 2.5" drives in the main compartment, and 2x 2.5" drives behind the motherboard tray.

1. Mount your 3.5" or 2.5" drives into the appropriate drive bays.
2. Secure the drives with screws.

3.5. Install Graphics Card and Other Expansion Cards

Sarung ini menyokong kad grafik sehingga 360mm panjang.

1. Tanggalkan penutup slot PCIe yang diperlukan dari belakang kes itu.
2. Insert your graphics card or other expansion cards into the motherboard's PCIe slots.
3. Selamatkan kad dengan skru.

3.6. Connect Front I/O Cables

Connect the front panel cables to their corresponding headers on your motherboard. Refer to your motherboard manual for exact header locations.

Image: Details the top I/O panel with Power Button, LED/Reset USB 2.0 Button, and 2x USB 3.0 ports. Also shows removable dust filters on top and bottom.

• Connect the USB 3.0 cables to the motherboard's USB 3.0 header.
• Connect the USB 2.0 cable to the motherboard's USB 2.0 header.
• Connect the HD Audio cable to the motherboard's audio header.
• Connect the Power SW, Reset SW, HDD LED, and Power LED cables to the front panel headers.

3.7. Pengurusan Kabel

Utilize the 26mm (1.0 inch) cable management space behind the motherboard tray to route and secure cables for a clean build and improved airflow.

Image: Displays internal dimensions including maximum CPU cooler height of 163mm (6.4 inches), cable management space of 26mm (1.0 inch), and maximum graphics card support of 360mm (14.1 inches).

1. Route power cables from the PSU through the cutouts to their respective components.
2. Use zip ties or Velcro straps (not included) to bundle and secure cables behind the motherboard tray.

3.8. Tutup Kes

1. Reattach the solid side panel and secure it with thumb screws.
2. Reattach the tempered glass side panel and secure it with thumb screws.

4. Arahan Operasi

4.1. Hidupkan/Mati Kuasa

Press the power button located on the top I/O panel to turn your system on or off.

4.2. Kawalan Pencahayaan ARGB

The pre-installed ARGB fans can be controlled via your motherboard's ARGB software (if supported) or through the dedicated LED/Reset button on the top I/O panel for pre-set lighting modes.

5. Penyelenggaraan

5.1. Pembersihan Penapis Habuk

The BITFENIX Fang ARGB case features removable dust filters on the top and bottom for easy cleaning. Regular cleaning helps maintain optimal airflow and prevents dust buildup inside your system.

Image: Shows the removable dust filters located on the top and bottom of the case for easy access and cleaning.

1. Gently slide out the dust filters from their respective slots.
2. Clean the filters using compressed air or by rinsing them with water. Ensure they are completely dry before re-installing.
3. Slide the clean filters back into place.

6. Spesifikasi

Image: Detailed dimensions of the BITFENIX Fang ARGB case, showing length, height, and width.

7. Penyelesaian masalah

If you encounter issues during or after assembly, consider the following common troubleshooting steps:

• Sistem Tidak Dihidupkan: Double-check all power connections, especially the 24-pin ATX and 8-pin CPU power cables to the motherboard, and the front panel power switch connection.
• Tiada Paparan: Ensure your graphics card is properly seated in its PCIe slot and connected to the power supply. Verify your monitor cable is connected to the graphics card, not the motherboard's integrated graphics port.
• Fan/ARGB Issues: Confirm all fan and ARGB cables are correctly connected to the motherboard headers or the ARGB controller. Refer to your motherboard manual for ARGB header locations and software control.
• Terlalu panas: Ensure all fans are spinning correctly and oriented for proper airflow (intake/exhaust). Clean dust filters regularly. Verify CPU cooler and GPU cooler installations.

8. Waranti dan Sokongan

For warranty information, technical support, or further assistance, please refer to the official BITFENIX webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan bukti pembelian anda untuk tuntutan waranti.

Official BITFENIX Webtapak: www.bitfenix.com