Yaheetech Mid Back Faux Leather Desk Office Chair Instruction Manual

Maklumat Keselamatan Penting

Sila baca semua arahan dengan teliti sebelum pemasangan dan penggunaan. Simpan manual ini untuk rujukan masa hadapan.

WARNING: This product can expose you to chemical Di(2-ethylhexyl)phthalate (DEHP) and Lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/furniture.

Kandungan Pakej

Ensure all components are present before beginning assembly. Refer to the diagram below for identification.

Image: All chair components laid out for inspection.

• Sandaran belakang (A)
• Tempat duduk (B)
• Armrests (C)
• Gas Lift (D)
• Base (E)
• Casters (F)
• Hardware (Screws, Washers, Allen Wrench)

Arahan Perhimpunan

Follow these steps to assemble your Yaheetech office chair. An assembly video is provided for visual guidance.

Langkah 1: Pasangkan Roda ke Pangkalan

Masukkan lima roda (F) ke dalam lubang di hujung setiap kaki tapak kerusi (E). Tolak dengan kuat sehingga ia klik pada tempatnya.

Image: Assembly diagram illustrating caster attachment.

Langkah 2: Masukkan Lif Gas

Place the gas lift (D) into the center hole of the assembled base. Important: Remove the black plastic cap from the top of the gas lift before insertion.

Image: Removing the black plastic cap from the gas lift.

Langkah 3: Pasangkan Tempat Letak Tangan ke Tempat Duduk

Align the armrests (C) with the pre-drilled holes on the underside of the seat (B). Secure them using the provided screws and the Allen wrench. Ensure they are tightened securely.

Langkah 4: Lampirkan Mekanisme pada Tempat Duduk

Position the chair mechanism (part of the hardware kit) onto the underside of the seat, aligning the holes. Secure it with the appropriate screws using the Allen wrench. Ensure the 'FRONT' label on the mechanism faces the front of the seat.

Step 5: Attach Backrest to Seat

Connect the backrest (A) to the seat assembly. Align the metal brackets of the backrest with the corresponding holes on the seat's underside and secure with screws.

Langkah 6: Sambungkan Pemasangan Tempat Duduk ke Lif Gas

Carefully place the assembled seat onto the gas lift, ensuring the center hole of the mechanism aligns with the top of the gas lift. Press down firmly to secure.

Mengendalikan Kerusi Anda

Kerusi pejabat Yaheetech anda menawarkan beberapa ciri boleh laras untuk keselesaan peribadi.

Melaraskan Ketinggian Tempat Duduk

To adjust the seat height, pull the lever located on the right side of the seat upwards. While seated, lift the lever to lower the seat. To raise the seat, lift the lever while standing or with minimal weight on the seat.

Tilting and Rocking Function

The chair features a tilt mechanism for a comfortable rocking/reclining option. Pull the lever outwards to activate the rocking motion. Push the lever inwards to lock the chair in an upright position. The tilt tension can be adjusted by turning the round knob located underneath the seat.

Image: Rocking function and tilt tension adjustment.

Pusing 360 Darjah

The chair's seat can swivel 360 degrees, providing essential mobility and ease of access to your workspace.

Detachable Armrests

The armrests are designed to be detachable. You can choose to use the chair with or without armrests based on your preference and space requirements. Removing them allows for a more relaxed sitting posture or to push the chair further under a desk.

Image: Chair shown with and without armrests.

Penjagaan dan Penyelenggaraan

Penjagaan yang betul akan memanjangkan hayat dan penampilan kerusi anda.

• Pembersihan: The supple PU leather is water-resistant. Wipe clean with a damp kain dan sabun lembut. Elakkan bahan kimia yang keras atau pembersih yang kasar.
• Pemeriksaan: Periksa semua skru dan bolt secara berkala untuk memastikan ia ketat. Ketatkan semula jika perlu.
• Pergerakan: Ensure casters are free of debris for smooth rolling.

Image: Features of the premium PU leather and high-density foam.

Menyelesaikan masalah

• Kerusi tidak melaraskan ketinggian: Ensure the black plastic cap has been removed from the gas lift. Check if the gas lift lever is fully engaged.
• Chair not tilting/rocking: Ensure the tilt lever is pulled outwards to enable the rocking function. Adjust the tilt tension knob if the chair feels too stiff or too loose.
• Roda tidak bergolek dengan lancar: Check casters for any trapped hair or debris and clean them. Ensure casters are fully inserted into the base.
• Kerusi berasa tidak stabil: Verify that all screws are securely tightened, especially those connecting the seat, backrest, and armrests.

Spesifikasi Produk

Image: Detailed product dimensions.

Waranti dan Sokongan Pelanggan

For warranty information or customer support, please refer to the documentation included with your purchase or contact Yaheetech directly through their official weblaman web atau saluran khidmat pelanggan. Simpan resit pembelian anda untuk sebarang tuntutan jaminan.