pengenalan
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Feit Electric Wi-Fi Smart Dimmer Light Switch. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image: The product packaging for the Feit Electric Smart Dimmers, highlighting key features such as Wi-Fi connectivity, remote access, voice control, and scheduling. It also states the requirement for a neutral wire.
Persediaan dan Pemasangan
Langkah-langkah Keselamatan
- Always turn off power at the circuit breaker before beginning any electrical work.
- Jika anda tidak pasti tentang mana-mana bahagian proses pemasangan, sila rujuk juruelektrik yang berkelayakan.
- Ensure your electrical box has a neutral wire. This dimmer switch requires a neutral wire for operation.
Identifying a Neutral Wire
Before installation, verify the presence of a neutral wire in your switch box. A neutral wire is typically white. If no neutral wire is present, this dimmer switch will not function.
Image: A diagram illustrating how to identify a neutral wire (white wire) within a standard electrical switch box. It shows the dimmer switch connected to line, load, ground, and neutral wires.
Arahan Pendawaian
The Feit Electric Smart Dimmer supports both single-pole and 3-way wiring configurations. Refer to the diagrams below for appropriate connections.
Image: Diagrams illustrating various wiring configurations for the smart dimmer, including single dimmer, two dimmers, switch and dimmer, and multiple dimmers, along with multi-gang installation examples.
- Matikan kuasa pada pemutus litar.
- Keluarkan plat dinding sedia ada dan suis.
- Identify the Line, Load, Neutral, and Ground wires.
- Connect the wires from the Feit Electric Smart Dimmer to the corresponding wires in your electrical box using wire nuts.
- Carefully push the wires back into the electrical box and secure the dimmer switch with screws.
- Attach the new wall plate.
- Pulihkan kuasa pada pemutus litar.
Berpasangan Wi-Fi
After installation, pair your dimmer switch with the Feit Electric app for smart control. The switch operates on a 2.4GHz Wi-Fi network.
- Download the Feit Electric app from your device's app store.
- Buat akaun atau log masuk.
- Follow the in-app instructions to add a new device. The power indicator light on the dimmer will blink during pairing mode.
Arahan Operasi
Kawalan Manual
Image: A detailed diagram of the Feit Electric Smart Dimmer switch, labeling the Power ON/OFF Switch, Dim (+) and Dim (-) buttons, Air Gap Switch, Light Level Indicator Lights, and Power Indicator Light.
- Suis ON / OFF Kuasa: Press the main button to turn lights on or off.
- Dim (+) / Brighten Lights: Press the upper side button to increase brightness. Hold for 2 seconds for stepless dimming.
- Dim (-) / Lower Lights: Press the lower side button to decrease brightness. Hold for 2 seconds for stepless dimming.
- Light Level Indicator Lights: Five LEDs indicate the selected brightness level (LED 1: 1%-20%, LED 2: 21%-40%, LED 3: 41%-60%, LED 4: 61%-80%, LED 5: 81%-100%).
- Lampu Petunjuk Kuasa: Blinks during pairing mode (lasts three minutes). Solid light indicates the unit is paired or after 3 minutes if no Wi-Fi connection.
- Suis Jurang Udara: Pull out the small tab at the bottom to completely cut power to the light fixture for bulb replacement or maintenance.
Ciri Kawalan Pintar
Imej: Tamatview of the smart features of the dimmer switch, including Remote Access, Voice Control (compatible with Alexa and Google Assistant), Scheduling & Timer, and Grouping, shown alongside the dimmer and a smartphone app interface.
- Akses Jauh: Control your lights from anywhere using the Feit Electric app.
- Kawalan Suara: Compatible with Amazon Alexa and Google Assistant. Use voice commands to turn lights on/off or adjust brightness (e.g., "Alexa, dim the kitchen lights to 20%").
- Penjadualan & Pemasa: Set schedules for your lights to turn on/off or dim at specific times.
- Pengelompokan: Group multiple Feit Electric smart devices together for simultaneous control.
Smooth Dimmability
Image: A visual representation of the smooth dimmability feature, showing five stages of light intensity from 1%-20% to 81%-100% brightness.
The dimmer provides smooth transitions across its dimming range, from 1% to 100% brightness. Ensure compatible dimmable LED bulbs are used for optimal performance.
Penyelenggaraan
The Feit Electric Smart Dimmer Light Switch requires minimal maintenance.
- Pembersihan: To clean the switch and wall plate, wipe with a soft, damp kain. Jangan gunakan pembersih atau pelarut yang melelas. Pastikan kuasa dimatikan sebelum membersihkan.
- Keserasian Mentol: For best dimming performance and to prevent flickering, use only dimmable LED bulbs.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Dimmer not responding / No power | No neutral wire; Power off at breaker; Loose wiring. | Verify neutral wire presence. Check circuit breaker. Re-check wiring connections. |
| Lights flickering or buzzing | Non-dimmable bulbs; Incompatible dimmable bulbs; Overloaded circuit. | Ensure all bulbs are dimmable LEDs. Try different brand of dimmable LED bulbs. Check total wattage does not exceed dimmer's maximum rating. |
| Cannot connect to Wi-Fi / App issues | Incorrect Wi-Fi band (not 2.4GHz); Incorrect pairing procedure; Weak Wi-Fi signal. | Ensure your router is broadcasting a 2.4GHz network. Follow app pairing instructions carefully. Move closer to router or improve Wi-Fi signal. |
| 3-way/4-way wiring not working | Incorrect wiring for multi-way setup; Defective switch. | Review wiring diagrams for 3-way/4-way configurations. Ensure only one smart dimmer is on the line side for 3-way, or two smart dimmers for specific 3-way setups. Consult an electrician if issues persist. |
Spesifikasi
Image: A detailed specification sheet for the dimmer switch, including physical dimensions, setup requirements, compatible wiring types, gang installation options, voltage, dan wat maksimumtage.
- Nombor Model: B0D4YFCTHV
- Jenama: Elektrik Feit
- Product Dimensions (Switch): 4.6 in (H) x 2.8 in (W) x 1.7 in (D)
- Berat produk: Approximately 1.3 Pounds (for 3-pack)
- Keperluan Persediaan: Neutral Wire, 2.4GHz Wi-Fi
- Compatible Wiring: Single Wiring, 3-WAY (1 smart dimmer on circuit), 3-WAY (2 smart dimmers on same circuit)
- Compatible Gang Installation: 1-Gang, 2-Gang, 3-Gang
- Voltage: 120 Volt, 60Hz, 15 Amp Maks
- Max Wattage: 450 Wattage (Incandescent/Halogen), 150 Watt Dimmable LED
- Mod Operasi: Automatik
- Jenis Kenalan: Biasa Terbuka
- Jenis Penyambung: Terminal Skru
- Terminal: skru
- Jenis Penggerak: Tuas Engsel
- Bahan Perhubungan: Tembaga
- Penilaian Perlindungan Antarabangsa: IP20
Maklumat Waranti
Specific warranty details for the Feit Electric Wi-Fi Smart Dimmer Light Switch are typically provided with the product packaging or available on the official Feit Electric weblaman web. Sila rujuk sumber ini untuk terma dan syarat jaminan yang paling tepat dan terkini.
Sokongan
Untuk bantuan lanjut, sokongan teknikal, atau untuk view frequently asked questions, please visit the official Feit Electric weblaman web atau hubungi jabatan khidmat pelanggan mereka. Maklumat hubungan biasanya boleh didapati pada pembungkusan produk atau alamat pengilang webtapak.
