ROCAM CR1025 Digital Alarm Clock User Manual

1. Pengenalan

This manual provides detailed instructions for the setup, operation, and maintenance of your ROCAM CR1025 Digital Alarm Clock. This device integrates an alarm clock, FM radio, Bluetooth speaker, night light, and convenient USB/Type C charging ports. Please read this manual thoroughly before use to ensure proper functionality and to maximize your user experience.

2. Maklumat Keselamatan

• Jangan dedahkan peranti kepada air, lembapan atau suhu yang melampau.
• Elakkan daripada menjatuhkan atau meletakkan peranti kepada kesan yang kuat.
• Use only the provided power adapter or a certified equivalent (DC 5V/2A).
• Jangan cuba membuka atau membaiki peranti sendiri. Hubungi sokongan pelanggan untuk mendapatkan bantuan.
• Jauhkan daripada kanak-kanak.

3. Kandungan Pakej

• ROCAM CR1025 Digital Alarm Clock
• Penyesuai Kuasa USB
• Kabel Kuasa USB-C
• Manual Pengguna

4. Produk Lebihview

Familiarize yourself with the components and controls of your ROCAM CR1025 alarm clock.

Image 1: ROCAM CR1025 Digital Alarm Clock with included power adapter and USB-C cable.

Image 2: The alarm clock positioned on a nightstand, highlighting its versatility as an alarm clock, FM radio, and Bluetooth speaker.

Kawalan dan Pelabuhan:

• Sleep Timer Knob: Adjusts sleep timer duration.
• Butang Penggera: Menetapkan dan mengaktifkan penggera.
• Butang Tetapan Masa: Memasuki mod tetapan masa.
• Dimmer/DST Button: Adjusts display brightness and toggles Daylight Saving Time.
• Preset/Pair Button: Saves FM radio presets and initiates Bluetooth pairing.
• Butang Main: Plays/pauses audio.
• Butang Kuasa / Mod: Turns the device on/off and switches between modes (FM, Bluetooth).
• Scan Knob: Mengimbas stesen radio FM.
• Snooze/Light Bar: Activates snooze, adjusts night light.
• USB-A Charging Port (DC 5V/1A): Untuk mengecas peranti luaran.
• Type-C Charging Port (DC 5V/1A): For charging external devices and powering the clock.
• DC 5V IN Port: Main power input for the clock.
• CR2032 Battery Compartment: For backup battery (pre-installed).

Image 3: Rear panel detailing the charging ports and battery backup compartment.

5. Persediaan

5.1 Sambungan Kuasa

1. Connect the provided USB-C power cable to the DC 5V IN port on the back of the alarm clock.
2. Plug the USB power adapter into a standard wall outlet.
3. The clock display will illuminate, indicating power is supplied.

5.2 Sandaran Bateri

The CR2032 button cell battery (pre-installed) maintains time and alarm settings during a power outage. No action is required unless the battery needs replacement.

5.3 Penetapan Masa Awal

1. Tekan dan tahan butang Masa Ditetapkan butang. Angka jam akan berkelip.
2. Putar Pemasa Tidur tombol untuk melaraskan jam.
3. Tekan ke Masa Ditetapkan butang sekali lagi. Angka minit akan berkelip.
4. Putar Pemasa Tidur tombol untuk melaraskan minit.
5. Tekan ke Masa Ditetapkan button once more to confirm and exit time setting.

5.4 Waktu Penjimatan Siang (DST)

Tekan ke Dimmer/DST button to toggle DST on or off. An indicator will appear on the display when DST is active.

6. Arahan Operasi

6.1 Tetapan Penggera

Jam ini menyokong dua penggera bebas.

1. Tekan dan tahan butang Penggera button. The alarm 1 hour digits will flash.
2. Putar Pemasa Tidur tombol untuk menetapkan jam penggera yang diingini.
3. Tekan ke Penggera button again. The alarm 1 minute digits will flash.
4. Putar Pemasa Tidur tombol untuk menetapkan minit penggera yang diingini.
5. Tekan ke Penggera button to select the alarm sound source: FM radio or built-in vintage ringtone.
6. Tekan ke Penggera button once more to confirm Alarm 1 settings. Repeat for Alarm 2 if needed.

6.2 Fungsi Tunda

Apabila penggera berbunyi, tekan butang besar Tunda/Ringan bar to activate snooze. The alarm will pause for 9 minutes and then sound again.

6.3 Radio FM

Image 4: The alarm clock displaying an FM radio frequency.

1. Tekan ke Kuasa/Mod butang untuk bertukar kepada mod radio FM.
2. Imbasan Automatik: Tekan dan tahan butang Imbas knob to automatically scan and save available FM stations (87.5-108 MHz). Up to 20 stations can be saved.
3. Penalaan Manual: Putar Imbas knob to manually tune to a specific frequency.
4. Akses Pratetap: Tekan ke Preset/Pair button to cycle through saved stations.

6.4 Pembesar Suara Bluetooth

Imej 5: Dalaman view of the alarm clock's speaker components, illustrating its Bluetooth capabilities.

1. Tekan ke Kuasa/Mod button to switch to Bluetooth mode. The Bluetooth icon will flash on the display.
2. On your mobile device, enable Bluetooth and search for "ROCAM CR1025".
3. Select the device to pair. Once paired, the Bluetooth icon will stop flashing and remain solid.
4. You can now stream audio from your device to the alarm clock. Adjust volume using your mobile device or the clock's volume controls.

6.5 Cahaya Malam

Image 6: The alarm clock's warm night light providing subtle illumination in a dark environment.

Tekan ke Tunda/Ringan bar repeatedly to cycle through the night light brightness levels (multiple levels available).

6.6 Port Pengecasan

The alarm clock features a USB-A port and a Type-C port for charging external devices.

• Connect your device's charging cable to the appropriate USB-A or Type-C port on the back of the alarm clock.
• Ensure the alarm clock is powered on and connected to its main power adapter for charging functionality.

6.7 Kecerahan Paparan

Tekan ke Dimmer/DST button repeatedly to adjust the LED display brightness through 5 available levels. At the lowest setting, the display may turn off completely except for a small indicator dot, suitable for dark environments.

7. Spesifikasi

8. Penyelesaian masalah

• Jam tidak dihidupkan: Ensure the power adapter is securely connected to both the clock and a working wall outlet.
• Penggera tidak berbunyi: Verify that the alarm is set correctly and activated. Check the alarm volume level.
• Penerimaan radio FM lemah: Adjust the clock's position to improve signal. Ensure no large metal objects are nearby.
• Bluetooth tidak bersambung: Ensure the clock is in Bluetooth pairing mode (flashing icon). Turn off and on Bluetooth on your mobile device and try pairing again. Make sure the clock is not already paired with another device.
• Charging ports not working: Ensure the clock is connected to its main power adapter. Some devices may require specific charging cables.

9. Penyelenggaraan

• Clean the device with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Pastikan peranti bebas daripada habuk dan serpihan.
• If storing for an extended period, disconnect from power and consider removing the backup battery.

10. Waranti dan Sokongan

ROCAM products are designed for reliability and performance. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official ROCAM website. Please have your model number (CR1025) and purchase details ready when contacting support.