pengenalan
Thank you for choosing the RHINO DISBEF-3T Triple Tank Cold Beverage Dispenser. This manual provides essential information for the safe and efficient operation, installation, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before using the dispenser and retain it for future reference.
Imej: Depan view of the RHINO DISBEF-3T Triple Tank Cold Beverage Dispenser, showcasing its three clear tanks and stainless steel base with dispensing levers.
Arahan Keselamatan Penting
- Baca semua arahan sebelum digunakan.
- Pastikan bekalan kuasa sepadan dengan spesifikasi pada label penarafan.
- Jangan rendam perkakas, kord, atau palam ke dalam air atau cecair lain.
- Awasi kanak-kanak untuk memastikan mereka tidak bermain dengan perkakas.
- Cabut plag dari soket apabila tidak digunakan dan sebelum membersihkan.
- Jangan kendalikan sebarang perkakas dengan kord atau palam yang rosak, atau selepas perkakas tidak berfungsi atau rosak dalam apa jua cara.
- Gunakan hanya lampiran yang disyorkan pengilang.
- Jangan gunakan di luar rumah.
- Jangan biarkan kord itu tergantung di tepi meja atau kaunter, atau menyentuh permukaan panas.
- Sentiasa letakkan perkakas pada permukaan yang stabil dan rata.
- Perkakas ini bertujuan untuk kegunaan komersial.
Komponen Produk
The RHINO DISBEF-3T dispenser consists of the following main components:
- Unit Asas: Contains the cooling system and electrical components, made of stainless steel.
- Beverage Tanks (x3): Transparent, food-grade polycarbonate tanks, each with an 18-liter capacity.
- Lids (x3): Covers for each beverage tank.
- Dispensing Levers (x3): "Push" type levers for controlled beverage flow.
- Drip Trays (x3): Removable trays located below each dispensing lever to catch spills.
- Agitation System: Fountain-type agitators within each tank to keep beverages mixed and chilled.
Image: An illustrative diagram highlighting key features of the dispenser, including triple tanks, polycarbonate construction, stainless steel cabinet, 680W power, and 18 liters per tank capacity.
Persediaan dan Pemasangan
- Membongkar: Keluarkan dispenser daripada pembungkusannya dengan berhati-hati. Periksa sebarang kerosakan.
- penempatan: Place the dispenser on a stable, level, and dry surface. Ensure there is adequate ventilation around the unit, especially at the rear and sides, to allow for proper heat dissipation from the cooling system.
- Pembersihan: Before first use, thoroughly clean all removable parts (tanks, lids, drip trays, agitators) with mild soap and water. Rinse thoroughly and dry.
- Perhimpunan:
- Insert the agitators into their respective positions within the base unit.
- Place the clean beverage tanks onto the base unit, ensuring they are securely seated.
- Attach the lids to the tanks.
- Position the drip trays under each dispensing lever.
- Sambungan Kuasa: Plug the power cord into a grounded electrical outlet that matches the appliance's voltage and frequency (680W power requirement).
Arahan Operasi
- Filling Tanks: Open the lids and pour your desired cold beverages into each of the three 18-liter tanks. Do not overfill.
- Hidupkan kuasa: Locate the power switch (usually on the side or rear of the base unit) and turn the dispenser ON.
- Cooling and Agitation: The cooling system will begin to chill the beverages, and the fountain-type agitation system will start mixing the contents to maintain an even temperature and prevent settling. This process may take some time depending on the initial temperature of the beverages.
- Pemberian: To dispense a beverage, place a cup under the desired dispensing lever and press the lever inward. Release the lever to stop the flow.
- Tahap Pemantauan: Regularly check beverage levels in the transparent tanks and refill as needed.
Imej: Dari dekat view of the three "PUSH" dispensing levers on the front of the stainless steel base, indicating how to operate them.
Imej: Dari dekat view of the three removable drip trays located beneath the dispensing levers, designed to catch any spills.
Pembersihan dan Penyelenggaraan
Regular cleaning and maintenance are crucial for the longevity and hygienic operation of your dispenser.
- Pembersihan Harian:
- Turn off and unplug the dispenser.
- Empty any remaining beverages from the tanks.
- Remove the tanks, lids, agitators, and drip trays.
- Wash these removable parts with warm, soapy water. Use a soft brush for agitators if needed.
- Rinse thoroughly with clean water and allow to air dry completely.
- Wipe down the exterior of the base unit with a damp kain. Jangan gunakan pembersih yang kasar atau rendam unit asas di dalam air.
- Penyelenggaraan Berkala:
- Periksa kord kuasa untuk sebarang tanda kerosakan.
- Ensure ventilation openings on the base unit are clear of dust and debris.
Panduan Penyelesaian Masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Dispenser not cooling |
|
|
| Beverage not dispensing |
|
|
| Agitator not working |
|
|
Spesifikasi
| Jenama | RHINO |
| Model | DISBEF-3T |
| warna | Hitam |
| Dimensi (L x W x H) | 40 cm x 70 cm x 73 cm |
| Jumlah Kapasiti | 54 Liters (3 x 18 Liters per tank) |
| bahan | Stainless Steel (base), Food-Grade Polycarbonate (tanks) |
| kuasa | 680 Watt |
| Berat badan | 48 kg |
| Agitation System | Fountain Type |
Image: A diagram illustrating the dimensions of the dispenser: 70 cm width, 40 cm depth, and 73 cm height, with a total weight of 48 kg.
Waranti dan Sokongan
For warranty information, technical support, or service inquiries, please contact RHINO customer service. Keep your purchase receipt as proof of purchase for warranty claims.
Refer to the official RHINO website or your purchase documentation for specific contact details and warranty terms.
