Manual Arahan Sistem Mikrofon Tanpa Wayar UHF 4 Saluran BOMGE (Pek Badan Model 460U-4)

1. Pengenalan

This manual provides detailed instructions for the setup, operation, and maintenance of your BOMGE 4 Channel UHF Wireless Microphone System. Designed for versatility and clear audio transmission, this system is ideal for various applications including conferences, broadcasting, weddings, karaoke, and live events in small to medium-sized venues.

The system features 4x50 adjustable UHF frequencies, ensuring stable and interference-free performance up to 300 feet in line of sight. It includes four bodypack transmitters, four lavalier microphones, and four headset microphones, offering flexible options for different users and scenarios.

2. Kandungan Pakej

Sila sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:

• 1 x Penerima Tanpa Wayar UHF
• 4 x Pemancar Pek Badan
• 4 x Mikrofon Lavalier
• 4 x Alat dengar Mikrofon
• 1 x Penyesuai Kuasa
• Kabel Audio 1 x 6.35mm
• 4 x Anti-Rolling Rings
• 2 x Antena
• 1 x Manual Pengguna

Nota: AA batteries are not included and must be purchased separately.

3. Produk Lebihview

3.1 Penerima Tanpa Wayar UHF

• Panel Depan: Power button, LCD display for frequency and status, individual microphone volume controls (A, B, C, D).
• Panel belakang: 4 XLR balanced outputs (one for each channel), 1 x 6.35mm (1/4") TRS mixed audio output, power input, and antenna connectors.

3.2 Bodypack Transmitter

• Komponen: Launch antenna, power indicator, digital display, frequency modulation button, AA battery installation box, audio input (for lavalier/headset mic), and power switch.
• Mikrofon: Includes lavalier (clip-on) and headset microphones for hands-free operation.

4. Panduan Persediaan

4.1 Persediaan Penerima

1. Sambungkan Antena: Screw the two included antennas into the ANT A and ANT B connectors on the rear panel of the receiver. Ensure they are securely fastened and positioned upright for optimal signal reception.
2. Sambungkan Kuasa: Plug the power adapter into the DC 12-15V 500mA power input on the rear of the receiver, then plug the adapter into a standard electrical outlet.
3. Sambungkan Output Audio:
   • For a mixed output of all four microphones, use the provided 6.35mm audio cable to connect the 'MIX OUT' jack on the receiver to the input of your sound mixer, amppenguat, atau sistem pembesar suara.
   • For individual microphone outputs, use XLR cables (not included) to connect the 'BAL A', 'BAL B', 'BAL C', and 'BAL D' XLR outputs on the receiver to corresponding inputs on your audio device.

4.2 Bodypack Transmitter Setup

1. Pasang Bateri: Open the battery compartment on each bodypack transmitter and insert two AA batteries, ensuring correct polarity.
2. Sambungkan Mikrofon: Plug your chosen lavalier or headset microphone into the audio input jack on the bodypack transmitter. Ensure the connection is secure.

4.3 Arahan Berpasangan

The bodypack transmitters and receiver are typically pre-paired from the factory. If re-pairing is necessary or you wish to change frequencies, follow these steps:

1. Ensure all bodypacks are turned off and no microphones are attached.
2. Turn on the receiver. Select the desired channel (A, B, C, or D) on the receiver that you wish to pair.
3. On the receiver, press the 'SET' button twice quickly for the selected channel. The IR indicator on the receiver will flash, indicating it's ready for pairing.
4. Open the battery compartment of the bodypack transmitter you want to pair. Turn on the bodypack.
5. Point the IR window of the bodypack transmitter towards the IR logo on the receiver's selected channel. The bodypack's display will show the new frequency, and the receiver's RF/AF indicators will light up, confirming successful pairing.
6. Repeat for other bodypacks if needed, ensuring each is paired to a unique channel.

5. Operasi

5.1 Menghidupkan/Mematikan

• Penerima: Press the 'POWER' button on the front panel to turn the receiver on or off.
• Pemancar Bodypack: Use the ON/OFF switch located on the bodypack to power it on or off.

5.2 Kawalan Kelantangan

• Penerima: Adjust the individual volume knobs (VOL A, VOL B, VOL C, VOL D) on the receiver's front panel to control the output level of each microphone.
• Pemancar Bodypack: The bodypacks feature a volume adjustment function. Long press the 'MUTE/VOL' button for 3 seconds to enter volume adjustment mode. The LCD will flash. Click the 'MUTE/VOL' button to increase the volume (up to 40) and the 'SET' button to decrease the volume (down to 0).

5.3 Fungsi Redam

On the bodypack transmitter, a short press of the 'MUTE/VOL' button will mute or unmute the microphone. The power indicator will turn red when muted and green when active.

5.4 Senario Penggunaan

This wireless microphone system is versatile and suitable for a wide range of applications:

• Persidangan dan Mesyuarat
• Broadcasting and Presentations
• Weddings and Social Events
• Karaoke and Entertainment
• Educational Institutions (schools, classrooms)
• Religious Venues (churches)
• Small to Medium-sized Stages

6. Penyelenggaraan

• Penggantian Bateri: Replace AA batteries in bodypacks when the low battery indicator appears on the display. Always use fresh batteries for optimal performance.
• Pembersihan: Use a soft, dry cloth to clean the receiver and bodypack transmitters. Avoid using liquid cleaners or abrasive materials.
• Storan: When not in use for extended periods, remove batteries from bodypacks and store the system in a cool, dry place away from direct sunlight and extreme temperatures.

7. Penyelesaian masalah

• Tiada Bunyi:
  • Ensure the receiver and bodypack are powered on.
  • Check all cable connections (audio output, microphone to bodypack).
  • Verify that the bodypack is paired to the correct receiver channel (RF/AF lights should be active).
  • Adjust receiver and bodypack volume levels.
  • Check if the bodypack microphone is muted.
• Gangguan atau Statik:
  • Change the operating frequency of the affected channel (refer to pairing instructions).
  • Ensure the receiver antennas are fully extended and unobstructed.
  • Reduce the distance between the bodypack and receiver.
  • Check for other wireless devices operating on similar frequencies nearby.
• Microphone/Bodypack Not Pairing:
  • Ensure fresh batteries are installed in the bodypack.
  • Follow the pairing steps carefully, ensuring the IR windows align.
• Unstable Frequency (when using multiple groups):
  • Each receiver and bodypack group should be set to a unique frequency to avoid interference.
  • Re-pair microphones according to the 'Steps to Pair' section.

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information, technical support, or any inquiries regarding your BOMGE 4 Channel UHF Wireless Microphone System, please refer to the contact details provided in the original product packaging or visit the official BOMGE website. Ensure you have your product model number (460U-4 Bodypack) and purchase details available when contacting support.