pengenalan
This manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric LED Dual Head Motion Sensor Security Outdoor Light. Please read these instructions thoroughly before installation and retain them for future reference. This fixture is designed to enhance security and illumination in outdoor spaces with its integrated motion and dusk-to-dawn sensors, and selectable color temperature feature.
Maklumat Keselamatan
AMARAN: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. Do not install this fixture with wet hands or while standing on a wet or damp permukaan.
PERHATIAN: All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician. This fixture is intended for outdoor use only and is rated for wet locations.
- Ensure the mounting surface is structurally sound to support the fixture.
- Do not attempt to disassemble or modify the fixture. There are no user-serviceable parts inside.
- Jauhkan bahan mudah terbakar dari lekapan lampu.
- Pakai cermin mata dan sarung tangan keselamatan semasa pemasangan.
Kandungan Pakej
Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan.
- LED Dual Head Motion Sensor Security Outdoor Light
- Mounting Hardware (screws, wire nuts, gasket, mounting plate)
Pemasangan
Follow these steps for proper installation of your security light.
- Matikan Kuasa: Sebelum memulakan, pastikan kuasa ke kotak simpang dimatikan pada pemutus litar atau kotak fius.
- Sediakan Permukaan Pemasangan: Secure the mounting plate to the junction box using the provided screws. Ensure the plate is flush and stable.
- Pendawaian: Connect the fixture's wires to your household wiring. Connect the black wire from the fixture to the black (live) wire from the junction box, the white wire from the fixture to the white (neutral) wire from the junction box, and the green/ground wire from the fixture to the bare copper (ground) wire from the junction box. Secure connections with wire nuts.
- Lekapan Lekapan: Attach the fixture body to the mounting plate, ensuring the gasket is properly seated to prevent water intrusion. Secure with the provided screws.
- Laraskan Kepala Cahaya: Loosen the adjustment screws on the light heads to position them as desired for optimal coverage. Tighten screws once adjusted.
Operasi
Your Feit Electric security light features multiple operational modes for enhanced functionality.
Sensor Senja-ke-Subuh
The integrated dusk-to-dawn sensor automatically turns the light on at sundown and off at sunrise, providing continuous illumination during nighttime hours without manual intervention. This feature is active by default.
Penderia Pergerakan
The motion sensor detects movement within its coverage area, activating the light when motion is detected. The detection range is approximately 60 feet. The light will remain on for a set duration after motion ceases, then turn off automatically.
5CCT Color Selectable
Before or during installation, you can select your preferred color temperature using the CCT control switch located on the fixture. Choose from five options:
- 2700K: Putih Lembut
- 3000K: Putih Cerah
- 4000K: Putih Sejuk
- 5000K: siang hari
- 6500K: Daylight Deluxe
Penyelenggaraan
The Feit Electric LED Dual Head Motion Sensor Security Outdoor Light is designed for minimal maintenance.
- Pembersihan: Untuk membersihkan lekapan, pastikan kuasa dimatikan. Gunakan kain lembut danamp kain. Jangan gunakan pembersih atau pelarut yang kasar, kerana ia boleh merosakkan kemasan atau komponen elektrik.
- Penggantian mentol: This fixture features integrated LEDs, meaning there are no bulbs to replace. The LEDs are rated for a 50,000-hour lifetime.
- Rintangan Cuaca: The rugged, weather-resistant housing (IP65 rated) is designed to withstand various outdoor conditions. Periodically check for any debris accumulation that might obstruct sensors or light output.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cahaya tidak menyala. | Tidak ada kekuatan untuk perlawanan. Dusk-to-dawn sensor detects too much ambient light. | Periksa pemutus litar/fius. Ensure sensor is not obstructed and ambient light levels are low enough for activation. |
| Lampu kekal menyala secara berterusan. | Motion sensor is continuously detecting movement. Isu pendawaian. | Ensure no constant motion in the detection zone. Adjust sensor angle if necessary. Pastikan sambungan pendawaian betul. |
| Sensor gerakan tidak mengesan pergerakan. | Sensor obstructed or improperly aimed. Ambient temperature too high (reduces sensor sensitivity). | Clear obstructions and adjust sensor angle. Ensure sensor is not exposed to direct heat sources. |
| Cahaya berkelip-kelip. | Sambungan pendawaian longgar. Voltage turun naik. | Turn off power and check all wiring connections. Rujuk juruelektrik jika voltage isu berterusan. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | S10.5DFL/5CCT/MM/BZ |
| Wattage | 48 Watt |
| Kecerahan | 5000 Lumen |
| Voltage | 120 Volt |
| Suhu Warna (CCT) | 2700K, 3000K, 4000K, 5000K, 6500K Selectable |
| seumur hidup | 50,000 Jam |
| Liputan Penderia Gerakan | Sehingga 60 kaki |
| Ciri Senja ke Subuh | Bersepadu |
| Penggunaan Dalaman/Luar | Luar |
| Tahap Ketahanan Air | Water Resistant (IP65 Rated) |
| Dimensi (L x W x H) | 9.68" x 4.58" x 4.94" |
| Berat badan | 1.2 paun |
| Komponen yang Disertakan | Perkakasan Pemasangan |
Waranti dan Sokongan
This Feit Electric product is backed by a 5-year manufacturer's warranty. For warranty claims or technical support, please contact Feit Electric customer service. Retain your proof of purchase for warranty validation.
For further assistance, visit the official Feit Electric webtapak atau hubungi talian sokongan pelanggan mereka.
