ERKUL Heavy Duty Roof Rack Cross Bars Replacement Metal Claws (Part A and Part C) Instruction Manual

1. Produk Lebihview

This document provides instructions for the replacement of metal claws (Part A and Part C) for ERKUL Heavy Duty Roof Rack Cross Bars, specifically designed for Strong V2 Flush Side Rails. These components are original replacement parts manufactured by ERKUL Auto LLC.

It is essential to confirm compatibility with your specific vehicle model and existing ERKUL Crossbars Strong V2 before proceeding with installation. Contact ERKUL customer service for assistance with compatibility verification.

2. Kandungan Pakej

Pakej mengandungi komponen berikut:

• 2 Set of Metal Claws for Front & Rear (as per product variant)

Imej 1: ERKUL Metal Claw (Part A). This image displays a single black metal claw, which is a component of the roof rack mounting system. It features a curved base designed to fit flush side rails and two attachment points at the top.

Imej 2: ERKUL Metal Claw (Part C). This image shows another black metal claw, similar to Part A, but with a visible "3" embossed on its surface, indicating a specific part designation. It also has a curved base and attachment points.

3. Arahan Pemasangan

These metal claws are replacement parts for the ERKUL Crossbars Strong V2 system. The installation process involves replacing existing or damaged claws. Ensure the vehicle is parked on a level surface and the engine is off before beginning.

3.1 Alat yang Diperlukan (Tidak Termasuk)

• Appropriate wrench or hex key for existing fasteners
• Soft cloth or towel to protect vehicle finish

3.2 Removal of Existing Claws

1. Locate Existing Claws: Identify the metal claws on your ERKUL Crossbars Strong V2 that require replacement. These are typically found at the ends of the crossbars where they attach to the vehicle's flush side rails.
2. Loosen Fasteners: Using the appropriate tool, carefully loosen and remove the bolts or screws that secure the existing metal claws to the crossbar feet. Keep all fasteners in a safe place as they may be reused.
3. Remove Old Claws: Once fasteners are removed, gently detach the old metal claws from the crossbar feet and the vehicle's side rails. Note their orientation for reference during new installation.

3.3 Installation of New Metal Claws

1. Identify Claw Type: The package includes both front (Part A) and rear (Part C) metal claws. Ensure you are using the correct claw for the corresponding crossbar foot position (front or rear). Refer to the images in Section 2 for visual identification.
2. Position New Claw: Align the new metal claw with the crossbar foot. The curved base of the claw should fit securely onto the vehicle's flush side rail.
3. Selamat dengan Pengikat: Insert the bolts or screws through the attachment points of the new metal claw and into the crossbar foot. Hand-tighten all fasteners initially.
4. Laraskan dan Kencangkan: Once all claws are in place, adjust the crossbars to their desired position on the flush side rails. Ensure the crossbars are parallel and evenly spaced. Then, progressively tighten all fasteners securely. Do not overtighten, as this can damage the components or vehicle. Refer to your original ERKUL Crossbars Strong V2 manual for specific torque specifications if available.
5. Sahkan Keselamatan: After tightening, gently shake the crossbars to ensure they are firmly attached and do not wobble. Re-check all fasteners after the first few miles of driving and periodically thereafter.

Imej 3: This image shows a vehicle with ERKUL roof rack cross bars installed on its flush side rails, demonstrating the complete system in use. The metal claws are integral to securing these crossbars.

4. Penyelenggaraan

To ensure the longevity and safe operation of your ERKUL roof rack system, regular maintenance is recommended:

• Pemeriksaan Berkala: Periodically inspect the metal claws and all mounting hardware for any signs of wear, corrosion, or damage.
• Pemeriksaan kekejangan: Regularly check the tightness of all bolts and fasteners. Vibrations during driving can cause them to loosen over time.
• Pembersihan: Clean the metal claws and surrounding areas with mild soap and water. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
• Storan: If removing the crossbars for extended periods, store the metal claws and other components in a dry, protected environment.

5. Penyelesaian masalah

Jika anda menghadapi sebarang masalah semasa pemasangan atau penggunaan, pertimbangkan perkara berikut:

• Loose Fit: Ensure all fasteners are tightened correctly. If the fit remains loose, re-check that the correct claw parts (Front/Rear, Part A/Part C) are used in their designated positions.
• Kesukaran Menjajarkan: Verify that the crossbar feet are correctly aligned with the vehicle's flush side rails and that the claws are oriented properly.
• Bahagian yang hilang: If any components were missing from your package, contact ERKUL customer service immediately.

For further assistance, please refer to the Support section below.

6. Spesifikasi Produk

7. Sokongan Pelanggan

For any questions regarding product compatibility, installation, or other concerns, please contact ERKUL customer service. Our team is available to assist you.

Sebelum pembelianasing spare parts, it is recommended to confirm with our support team which part will be compatible with your vehicle model to ensure correct fitment.

Replacement parts are sent directly from the ERKUL Auto manufacturing factory.

Visit the official ERKUL store for more information: ERKUL Auto Store