1. Produk Lebihview
The Mesqool Vibrating Alarm Clock (Model CR1027) is a portable device designed to assist with waking up through customizable alarm modes, including vibration, buzzer, or both. It features a rechargeable battery, dual alarm settings, and adjustable vibration intensity. This manual provides comprehensive instructions for its use.
Rajah 1: Depan view of the Mesqool Vibrating Alarm Clock, displaying the digital time, AM/PM indicator, alarm icons, and battery status.
2. Kandungan Pakej
Sila sahkan bahawa semua item terdapat dalam pakej anda:
- Mesqool Vibrating Alarm Clock (CR1027)
- Kabel Pengecas USB
- Manual Pengguna (dokumen ini)
3. Reka Letak Peranti
Familiarize yourself with the buttons and ports on your alarm clock for proper operation.
Rajah 2: sebelah view of the alarm clock, indicating the location of control buttons and the charging port. Specific button functions are detailed in the operating instructions.
4. Persediaan
4.1 Pengecasan Awal
Before using the alarm clock for the first time, ensure it is fully charged. Connect the provided USB charging cable to the clock's charging port and then to a compatible USB power adapter (not included). The battery indicator on the display will show the charging status.
Rajah 3: The alarm clock connected to a charging cable, illustrating the charging process.
4.2 Hidupkan/Mati Kuasa
To power the device on or off, press and hold the Power button (located on the side, refer to Figure 2) for approximately 3 seconds.
5. Arahan Operasi
5.1 Menetapkan Masa
- Tekan ke Masa Ditetapkan button once. The hour digits will begin to flash.
- Gunakan + dan - butang untuk melaraskan jam.
- Tekan Masa Ditetapkan sekali lagi. Angka minit akan berkelip.
- Gunakan + dan - butang untuk melaraskan minit.
- Tekan Masa Ditetapkan a third time to confirm the time and exit the setting mode.
5.2 Menetapkan Penggera (Penggera 1 dan Penggera 2)
The alarm clock supports two independent alarms. The procedure for setting each alarm is identical.
- Tekan ke Penggera 1 or Penggera 2 button once. The alarm time will flash.
- Gunakan + dan - butang untuk menetapkan jam penggera yang diingini.
- Tekan masing-masing Penggera button again. The alarm minutes will flash.
- Gunakan + dan - butang untuk menetapkan minit penggera yang diingini.
- Tekan masing-masing Penggera button a third time to confirm the alarm time.
- Immediately after setting the time, press the Penggera button repeatedly to cycle through the available alarm modes: Getaran Sahaja, Buzzer Sahaja, dan Vibration + Buzzer. The corresponding icon will appear on the display.
- To activate or deactivate an alarm, press the respective Penggera button until the alarm icon appears (activated) or disappears (deactivated).
Rajah 4: Display showing the three alarm modes: Vibration (VIB), Vibration + Buzzer (VIB+BUZZ), and Buzzer (BUZZ).
5.3 Fungsi Tunda
When an alarm is active, press the large Tunda/Ringan button (typically on the top or front, refer to Figure 2) to temporarily silence the alarm for approximately 9 minutes. The alarm will reactivate after this period.
5.4 Menghentikan Penggera
To stop an active alarm, press any button other than the Tunda/Ringan button. The alarm will then reset for the next scheduled activation.
5.5 Melaraskan Keamatan Getaran
The alarm clock offers three levels of vibration intensity: Low, Middle, and High.
- While the alarm is not active, press the Getaran button (refer to Figure 2).
- Each press will cycle through the intensity levels. The display may indicate the current level.
Rajah 5: Illustration of the three vibration intensity levels: Low, Middle, and High.
5.6 Kecerahan Paparan
Tekan ke Cahaya button (often combined with Snooze, refer to Figure 2) to cycle through different display brightness levels.
6. Penyelenggaraan
- Clean the device with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals.
- Jangan dedahkan peranti kepada suhu yang melampau, cahaya matahari langsung atau kelembapan berlebihan.
- Ensure the charging port remains free of dust and debris to maintain proper connection.
- When storing the device for extended periods, keep it in a cool, dry environment.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Jam tidak menyala. | Bateri habis. | Connect the device to a power source using the USB cable and allow it to charge fully. |
| Alarm does not sound or vibrate. | Penggera tidak diaktifkan atau ditetapkan dengan tidak betul. | Verify that the alarm time is set correctly and the desired alarm mode (Vibration, Buzzer, or both) is selected and activated (alarm icon visible on display). |
| Paparan malap atau tidak boleh dibaca. | Brightness level is set too low. | Tekan ke Cahaya button to increase the display brightness. |
| Butang tidak bertindak balas. | Gangguan perisian sementara. | Try restarting the device by holding the Power button for 3 seconds. If the issue persists, allow the battery to fully deplete and then recharge. |
8. Spesifikasi
- model: CR1027
- Jenama: Mesqool
- Jenis Paparan: LED
- Sumber Kuasa: Dikuasakan Bateri (Boleh dicas semula)
- Kapasiti Bateri: 3000mAh
- Dimensi Produk: Approximately 3.35"W x 3.35"H x 1.06"D
- Berat Barang: 7.4 auns
- Ciri Khas: Adjustable Volume, Dual Alarms, Snooze Function, Vibration Alarm
9. Waranti dan Sokongan
Mesqool products are manufactured to high standards. For warranty information, technical assistance, or customer support, please refer to the contact details provided on the product packaging or visit the official Mesqool website. Please retain your purchase receipt as proof of purchase for warranty claims.
Rajah 6: Product packaging, which typically includes manufacturer details and support contact information such as email (e.g., support-eu@mesqool.com) and website (e.g., http://www.mesqool.com).
