1. Pengenalan
Welcome to the user manual for your new Blukar LED Headlamp. Tajuk iniamp is designed for various activities, offering super bright illumination, multiple lighting modes, motion sensor control, and a durable, waterproof design. Please read this manual carefully to ensure proper use and maintenance of your device.
Figure 1: Blukar LED Headlamp 2-pack with charging cables.
2. Persediaan
2.1 Membongkar
Before first use, ensure all components are present:
- Kepala LED Blukaramp (2 unit)
- USB-C Charging Cable (2 units)
2.2 Pengecasan Awal
Your headlamp comes with a built-in 1200mAh rechargeable battery. For optimal performance, fully charge the headlamp sebelum penggunaan pertamanya.
- Cari port pengecasan USB-C pada kepalaamp.
- Sambungkan kabel USB-C yang disediakan ke kepalaamp and a compatible USB power source (e.g., AC adapter, power bank, computer USB port).
- The charging indicator light will show charging status (refer to product-specific LED indicator behavior, typically red for charging, green/blue for full).
- Pengecasan biasanya mengambil masa kira-kira 2-3 jam.
Rajah 2: Tajukamp features a built-in 1200mAh rechargeable battery for long-lasting use.
Figure 3: USB-C charging port for convenient and universal recharging.
2.3 Melaraskan Ikat Kepala
The elastic headband is adjustable to fit various head sizes comfortably and securely.
- Letakkan kepalaamp atas kepala awak.
- Adjust the elastic strap using the buckle until it feels snug but not too tight.
- kepalaamp unit can be tilted up to 45 degrees to direct light where needed.
Figure 4: Adjustable elastic headband for a comfortable and secure fit during activities.
3. Arahan Operasi
3.1 Hidupkan/Mati Kuasa
Untuk memusingkan kepalaamp on or off, press the main power button located on the top of the unit.
3.2 Mod Pencahayaan
The Blukar LED Headlamp features 8 distinct lighting modes, including 5 normal modes and 3 sensor modes. Press the main power button to cycle through the normal modes:
- XPG White Light (Spotlight): Provides a focused beam for long-distance illumination.
- COB White Light (Floodlight): Offers a wide, even spread of light for close-range tasks.
- XPG + COB White Light (Spotlight + Floodlight): Combines both lights for maximum brightness and coverage.
- COB Red Light (Red Floodlight): Ideal for preserving night vision and signaling.
- COB Red Light SOS (Red Strobe): Lampu merah berkelip untuk isyarat kecemasan.
In any of these 5 normal modes, a short press of the switch button will turn off the light directly.
Figure 5: Visual representation of the 8 lighting modes available on the headlamp.
3.3 Dimmable Brightness
For adjustable brightness, use the continuous dimming function:
- While in any white light mode, long press the main power button.
- The brightness will cycle from 100% down to 30% and back up. Release the button at your desired brightness level.
Figure 6: Long press the power button to adjust brightness from 100% to 30%.
3.4 Fungsi Sensor Gerakan
kepalaamp features a motion sensor for hands-free operation. Press the dedicated sensor button (often marked with a wave icon) to activate sensor mode. The indicator light will typically turn blue to confirm activation.
- Mod Sensor: XPG white light, COB white light, XPG+COB white light. Cycle through these by short pressing the main power button while in sensor mode.
- Aktifkan/Nyahaktifkan: In sensor mode, wave your hand within 15 cm (approximately 6 inches) in front of the headlamp untuk menghidupkan atau mematikan lampu.
Figure 7: Wave your hand within 15 cm to control the headlamp in sensor mode.
Video 1: Demonstration of Blukar LED Headlamp features, including motion sensor and various lighting modes.
Video 2: Selesaiview of the Blukar LED Headlamp's functionality and bright illumination.
4. Penyelenggaraan
4.1 Pembersihan
- Lap kepalaamp badan dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
- The elastic headband is detachable and washable. Hand wash with mild soap and water, then air dry.
4.2 Penyimpanan
- Simpan kepalaamp di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
- If storing for an extended period, charge the battery every 3-6 months to maintain battery health.
4.3 Penjagaan Bateri
- Elakkan menyahcas sepenuhnya bateri dengan kerap.
- Gunakan hanya kabel USB-C yang disediakan atau setara yang diperakui untuk mengecas.
5. Penyelesaian masalah
| Isu | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Ketuaamp tidak menyala. | Bateri lemah atau habis. | Mengecas kepalaamp sepenuhnya menggunakan kabel USB-C yang disediakan. |
| Light flickers or turns off unexpectedly in sensor mode. | Accidental activation/deactivation of motion sensor. | Press the main power button to exit sensor mode and use normal lighting modes. |
| Kecerahan terlalu rendah. | Battery is low or brightness is dimmed. | Recharge the battery. Long press the power button to adjust brightness to 100%. |
| Ketuaamp tidak dicas. | Kabel atau punca kuasa rosak. | Cuba kabel USB-C atau penyesuai kuasa yang lain. Pastikan sambungannya selamat. |
6. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Blukar |
| Model | K9125 |
| Jenis Sumber Cahaya | LED (XPG & COB) |
| Kecerahan Putih | 2000 Lumen |
| Kapasiti Bateri | Polimer Lithium 1200mAh |
| Sumber Kuasa | Dikuasakan Bateri (Boleh Dicas Semula USB-C) |
| Masa jalan | Sehingga 20 jam |
| Tahan Air | IPX5 Kalis Air |
| Ciri Khas | Super Bright, Sensor Control, Spotlight & Floodlight, 8 Lighting Modes, Dimmable Brightness, Ultra-Light & Comfortable |
| bahan | ABS |
| Dimensi Produk | 2.44"D x 1.72"W x 1.4"H |
| Berat Barang | 172 Gram (6.1 auns) |
7. Waranti dan Sokongan
Blukar products are manufactured to high-quality standards. For information regarding warranty coverage, returns, or technical support, please refer to the product packaging or contact Blukar customer service directly through the retailer where the product was purchased.
For further assistance, please visit the official Blukar store or contact their support team.
