Vixic P-T M950 Label Maker Machine User Manual

1. Pengenalan

This manual provides detailed instructions for the setup, operation, and maintenance of your Vixic P-T M950 Label Maker Machine. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.

Figure 1: Vixic P-T M950 Label Maker Machine and accessories.

2. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• 1 x Vixic M950 Label Maker Machine
• 1 x MZ Label Tape (Black on White, 12mm*4m)
• 1 x Kabel Pengecas Jenis-C
• 1 x Manual Pengguna

3. Persediaan

3.1 Mengecas Peranti

The label maker is equipped with a built-in 1200mAh lithium battery. Before first use, fully charge the device.

1. Sambungkan kabel pengecas Jenis-C yang disediakan ke port pengecasan pada peranti.
2. Sambungkan hujung kabel yang satu lagi ke penyesuai kuasa USB yang serasi (tidak disertakan).
3. The device takes approximately 2.5 hours to fully charge. The charging indicator will show the charging status.

Figure 2: Charging the Vixic M950 Label Maker. A full charge allows for approximately 1.6 hours of continuous printing.

3.2 Memuatkan Pita Label

To load or replace the label tape:

1. Locate the tape compartment on the back of the label maker.
2. Open the integrated back cover.
3. Insert the label tape cassette into the compartment, ensuring it clicks into place. The tape end should extend slightly from the printer's output slot.
4. Tutup penutup belakang dengan selamat.

Figure 3: Loading the label tape cassette into the Vixic M950 Label Maker.

4. Arahan Operasi

4.1 Menghidupkan/Mematikan

Press the power button to turn the device on or off. The backlit LCD display will illuminate upon powering on.

4.2 Mencipta Label

The Vixic M950 offers two modes for label creation:

4.2.1 Keyboard Input Mode

1. Hidupkan peranti.
2. Use the QWERTY keyboard to type your desired text. The 14-character backlit LCD display allows for easy preview.
3. Press the 'Print' button to print the label.

4.2.2 Bluetooth App Mode

For advanced customization, connect to the "Print Master" app via Bluetooth.

1. Download the "Print Master" app from your device's app store.
2. Pastikan Bluetooth didayakan pada telefon pintar anda.
3. Open the "Print Master" app and connect to your Vixic M950 device.
4. Use the app to design your label with various fonts, borders, symbols, and clip art.
5. Send the design to the label maker for printing.

Figure 4: Label creation using both the integrated keyboard and the Bluetooth app.

4.3 Pilihan Penyesuaian

The Vixic M950 offers extensive customization:

• fon: Choose from 8 artistic fonts.
• Sempadan: Select from 103 borders/underscores.
• Symbols & Clip Art: Access 791 symbols and clip art options.
• Storan Label: Store up to 9 labels for future printing, each supporting up to 89 characters.

Figure 5: Customization options available for label design.

4.4 Cutting Labels

The device features a built-in cutter for clean label separation. After printing, press the cutter button to trim the label.

5. Penyelenggaraan

5.1 Penjagaan Bateri

Untuk memanjangkan hayat bateri:

• Cas peranti sepenuhnya sebelum penggunaan awal.
• The device automatically shuts down after 5 minutes of inactivity to conserve power.
• Elakkan daripada mendedahkan peranti kepada suhu yang melampau.

5.2 Pembersihan

Gently wipe the exterior of the label maker with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.

6. Penyelesaian masalah

If you encounter issues with your Vixic M950, please refer to the following common solutions:

• Peranti tidak dihidupkan: Ensure the battery is charged. Connect the device to the Type-C cable and a power source.
• No print or faint print: Check if the label tape is correctly installed and not empty. Ensure the tape is properly aligned in the output slot.
• Isu sambungan Bluetooth: Make sure Bluetooth is enabled on your smartphone and the "Print Master" app is updated. Restart both the label maker and your smartphone.
• Labels not cutting cleanly: Ensure the tape is fully extended before cutting. The built-in cutter should be free of debris.

For further assistance, please contact Vixic customer support.

7. Spesifikasi

8. Waranti dan Sokongan

Vixic provides professional customer service and technical support for its products. For any inquiries, technical assistance, or warranty claims, please contact our support team through the following channels:

• e-mel: Refer to your product packaging or the official Vixic webtapak untuk alamat e-mel terkini.
• Sembang Langsung: Available on the official Vixic webtapak semasa waktu perniagaan.

Figure 6: Vixic Customer Service and Technical Support.