Turtle Beach Kone XP Air Wireless Gaming Mouse Instruction Manual

pengenalan

This manual provides detailed instructions for the setup, operation, and maintenance of your Turtle Beach Kone XP Air Wireless Customizable Ergonomic RGB Gaming Mouse. Please read this manual thoroughly to ensure optimal performance and longevity of your device.

The Turtle Beach Kone XP Air Wireless Gaming Mouse on its charging dock, showcasing its ergonomic design and RGB lighting.

Kandungan Pakej

Sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:

• Kone XP Air Gaming Mouse
• Dok Caj Cepat
• Wireless USB-A Transmitter (Dongle)
• PhantomFlex USB-C to USB-A Charging Cable

Illustration of the Kone XP Air mouse, Rapid Charge Dock, wireless USB-A transmitter, and PhantomFlex charging cable.

Persediaan

1. Pengecasan Awal

1. Connect the PhantomFlex USB-C to USB-A Charging Cable to the Rapid Charge Dock and a powered USB-A port on your computer or a USB wall adapter.
2. Place the Kone XP Air mouse onto the Rapid Charge Dock. Ensure the mouse is properly seated for charging. The mouse and dock RGB lighting will indicate charging status.
3. For initial use, it is recommended to fully charge the mouse. A 10-minute charge provides approximately 5 hours of playtime, and a full charge can last up to 100 hours.

The Kone XP Air mouse securely placed on its Rapid Charge Dock for charging.

2. Menyambung Tetikus

The Kone XP Air offers two connectivity options: 2.4GHz Wireless (via USB-A Transmitter) and Bluetooth.

2.1. Sambungan Tanpa Wayar 2.4GHz (Disyorkan untuk Permainan)

1. Insert the Wireless USB-A Transmitter into an available USB-A port on your computer. For optimal signal, you can plug the transmitter directly into the USB passthrough port on the front of the Rapid Charge Dock.
2. Hidupkan tetikus menggunakan suis yang terletak di bahagian bawah.
3. The mouse should automatically connect to the transmitter. The LED indicator on the mouse will confirm connection.

The Rapid Charge Dock with the wireless USB-A transmitter inserted into the front USB passthrough port.

2.2. Sambungan Bluetooth

1. Turn on the mouse using the switch on the underside.
2. Press and hold the Bluetooth pairing button (refer to the mouse diagram for location) until the mouse LED indicator begins to flash, indicating pairing mode.
3. On your computer or device, navigate to Bluetooth settings and select "Kone XP Air" from the list of available devices to pair.
4. The mouse LED indicator will become solid when successfully paired.

3. Software Installation (SWARM II)

To unlock full customization options, including button remapping, DPI adjustments, and RGB lighting effects, download and install the SWARM II software from the official Turtle Beach website. This software is compatible with Windows 10 and Windows 11.

• Visit the official Turtle Beach support webtapak.
• Locate the SWARM II software for the Kone XP Air.
• Download and follow the on-screen instructions to install the software.
• Ensure your mouse is connected (preferably via 2.4GHz wireless) during the software setup for proper recognition and firmware updates.

Arahan Operasi

1. Ergonomic Design and Programmable Buttons

The Kone XP Air features an ergonomic shape designed for comfort during extended use. It includes 10 dedicated buttons and a 4D scroll wheel, which can be expanded to 29 programmable inputs using the Easy-Shift[+] duplicator button.

Berakhirview of the Kone XP Air's programmable buttons and the Easy-Shift[+] function.

• Left Click (Button 1)
• Right Click (Button 2)
• Scroll Wheel Click (Button 3)
• Scroll Wheel Tilt Left/Right (Buttons 4 & 5)
• DPI Cycle Button (Default)
• Side Buttons (4 buttons, typically for forward/back, macros)
• Easy-Shift[+] Button: Located on the thumb rest, holding this button activates a secondary function for other buttons, effectively doubling your available inputs. Customize these functions in the SWARM II software.

2. Pelarasan DPI

The Kone XP Air is equipped with an Owl-Eye 19K DPI optical sensor for precise tracking. Use the dedicated DPI cycle button (usually located behind the scroll wheel) to switch between pre-set DPI stages. Ini stages can be customized within the SWARM II software to suit your preferences.

Illustration highlighting the 19K DPI Owl-Eye optical sensor and TITAN Optical Switches.

3. RGB Lighting (AIMO Illumination)

The mouse features 5 customizable RGB lighting zones, including a translucent shell and a 4D wheel, powered by AIMO illumination technology. Lighting effects can be configured and synchronized with other AIMO-enabled devices using the SWARM II software.

The Kone XP Air mouse showcasing its dynamic AIMO RGB lighting.

4. NVIDIA Reflex Compatibility

The Kone XP Air is NVIDIA Reflex compatible, which, when paired with GeForce RTX GPUs and NVIDIA G-SYNC monitors, can help reduce system latency for improved responsiveness in supported games.

Penyelenggaraan

1. Pembersihan

• Untuk membersihkan tetikus, gunakan kain yang lembut, kering dan tidak berbulu.
• Untuk kotoran degil, sedikit dampen kain dengan air atau larutan pembersih lembut. Elakkan bahan kimia yang keras atau bahan yang melelas.
• Jangan biarkan cecair memasuki komponen dalaman tetikus.

2. PTFE Glides

The mouse is equipped with heat-treated, pure PTFE glides for smooth movement. These glides are designed for durability but can wear over time with heavy use. Replacement glides may be available from authorized retailers or the Turtle Beach webtapak.

3. Penjagaan Bateri

• Elakkan menyahcas sepenuhnya bateri dengan kerap untuk memanjangkan jangka hayatnya.
• Simpan tetikus di tempat yang sejuk dan kering apabila tidak digunakan untuk tempoh yang lama.

Menyelesaikan masalah

1. Tetikus Tidak Membalas

• Semak Kuasa: Ensure the mouse is turned on and has sufficient battery charge. Place it on the charging dock or connect it via the PhantomFlex cable.
• Semak Sambungan:
  • For 2.4GHz Wireless: Ensure the USB-A transmitter is securely plugged into a working USB port. Try a different USB port.
  • For Bluetooth: Verify Bluetooth is enabled on your device and the mouse is paired. Try re-pairing the mouse.
• Mulakan semula Peranti: Restart your computer or device.
• Software Interference: Temporarily disable any other mouse software or drivers that might conflict with SWARM II.

2. Buttons Unresponsive or Stuck

• Butang Bersih: Ensure no debris is lodged around the buttons. Use compressed air to clear any dust.
• Software Check: Open SWARM II and verify button assignments. Reset to default settings if necessary.
• Kemas Kini Perisian Tegar: Ensure the mouse firmware is up to date via SWARM II.

3. Inconsistent Tracking or Lag

• Permukaan: Use the mouse on a clean, uniform surface, preferably a gaming mouse pad.
• Tetapan DPI: Adjust DPI settings in SWARM II to find a comfortable and stable tracking speed.
• Gangguan: For 2.4GHz wireless, ensure the transmitter is not obstructed and is close to the mouse. Avoid other wireless devices operating on the same frequency if possible.
• Tahap Bateri: Low battery can sometimes affect performance. Charge the mouse fully.

4. Isu Pencahayaan RGB

• SWARM II: Ensure SWARM II is running and lighting effects are configured correctly.
• Software Conflicts: Check for other RGB control software that might be conflicting.
• Perisian tegar: Update mouse firmware through SWARM II.

Spesifikasi

Physical dimensions of the Kone XP Air mouse.

Waranti dan Sokongan

1. Maklumat Waranti

For detailed warranty information regarding your Turtle Beach Kone XP Air Wireless Gaming Mouse, please refer to the warranty card included with your product or visit the official Turtle Beach webtapak. Terma dan syarat waranti mungkin berbeza mengikut wilayah.

2. Sokongan Teknikal

If you encounter any issues not covered in this manual or require further assistance, please visit the Turtle Beach support website for FAQs, driver downloads, and contact information for technical support.

Official Turtle Beach Webtapak: www.turtlebeach.com/support