pengenalan
Thank you for choosing the ErGear Electric Standing Desk. This manual provides comprehensive instructions for the assembly, operation, and maintenance of your new height-adjustable desk. Please read this manual carefully before assembly and use to ensure safe and efficient operation.
Image: The ErGear Electric Standing Desk, 44x24 inches, in vintage brown, set up with a laptop, monitor, and other office items. It features a control panel for height adjustment.
Maklumat Keselamatan Penting
- Do not exceed the recommended maximum weight limit of 176 pounds to ensure stability and longevity of the desk.
- Ensure all cables are properly managed and have sufficient slack to avoid damage or disconnection during height adjustments.
- Jauhkan kanak-kanak dan haiwan peliharaan dari meja semasa operasi untuk mengelakkan kecederaan.
- Elakkan meletakkan cecair terus pada panel kawalan atau berhampiran komponen elektrik.
- Gunakan hanya penyesuai kuasa dan komponen yang disediakan.
- Periksa semua skru dan sambungan secara berkala untuk memastikan ia kekal ketat.
Kandungan Pakej
Before beginning assembly, please verify that all components are present and undamaged. Refer to the assembly video for a visual guide to the parts.
- Desktop (Two-piece)
- Kaki Meja (2)
- Side Plates (2)
- Batang Penghantaran
- Panel Kawalan
- Penyesuai Kuasa
- Klip Pengurusan Kabel
- Cangkuk Fon Kepala (2)
- All necessary screws and tools (Allen wrench, etc.)
Imej: Meletup view of the ErGear Electric Standing Desk components, including the two-piece desktop, leg frames, control panel, and various hardware, laid out on a white background.
Persediaan dan Perhimpunan
Follow these steps to assemble your ErGear Electric Standing Desk. An average assembly time is approximately 30 minutes.
Step 1: Assemble the Desk Legs
- Attach the foot pads to the bottom of each leg.
- Connect the leg frames using the provided crossbar and screws. Ensure all screws are tightened securely.
Imej: Dari dekat view of the desk leg assembly, showing screws being inserted to secure the leg components.
Step 2: Attach Side Plates and Transmission Rod
- Secure the side plates to the top of the assembled leg frames using the designated screws.
- Insert the transmission rod into the appropriate slots on the leg frames and motor assembly. Ensure it is fully engaged. If the desk legs are not the same height, insert the rod into the left leg and turn to adjust until they are level.
Image: The desk frame with the transmission rod correctly installed, connecting the two leg mechanisms.
Step 3: Assemble the Desktop and Other Parts
- Place the two-piece desktop upside down on a soft, clean surface.
- Align the desktop pieces and secure them together using the provided connectors and screws.
- Carefully place the assembled leg frame onto the desktop, aligning the screw holes.
- Attach the leg frame to the desktop using the provided screws.
- Install the control panel and headphone hooks to the underside of the desktop as indicated in the instructions.
Image: The underside of the desk, showing the control panel and cable management clips attached to the desktop.
Langkah 4: Sambungkan Kabel
- Connect the motor cable to the control box.
- Connect the control panel cable to the control box.
- Connect the power adapter to the control box and then to a power outlet.
- Use the provided cable management clips to organize all cables neatly.
For a visual step-by-step guide, please watch the official assembly video:
Video: Official ErGear Electric Standing Desk Assembly Video. This video demonstrates the complete assembly process for the EGESD4/5/6 models, including attaching legs, side plates, transmission rod, desktop, and connecting cables.
Arahan Operasi
Your ErGear Electric Standing Desk features an intuitive control panel for easy height adjustment and memory presets.
Pelarasan Ketinggian
- Naikkan Meja: Tekan dan tahan butang Up arrow (▲) button to raise the desk to your desired height.
- Meja Bawah: Tekan dan tahan butang Down arrow (▼) button to lower the desk to your desired height.
- The desk height can be adjusted smoothly from 28.35 inches to 46.46 inches.
Image: A close-up of the ErGear desk control panel, showing the digital height display and the up/down arrow buttons for manual adjustment.
Pratetap Memori
The control panel allows you to save up to three preferred height settings for quick transitions.
- Untuk Menyimpan Pratetap: Adjust the desk to your desired height using the up/down arrows. Press the "S" button, then immediately press one of the number buttons ("1", "2", atau "3") untuk menyimpan ketinggian semasa pada pratetap tersebut.
- To Use a Preset: Hanya tekan butang nombor yang sepadan ("1", "2", atau "3"Meja akan bergerak secara automatik ke ketinggian yang disimpan.
Observe the smooth operation of the desk's height adjustment:
Video: A user demonstrating the height adjustment feature of the ErGear Standing Desk. The desk smoothly moves up and down, showcasing the electric motor's functionality and the ease of using the control panel.
Penyelenggaraan
- Pembersihan: Lap permukaan desktop dengan kain lembut,amp kain. Elakkan bahan kimia yang keras atau pembersih kasar yang boleh merosakkan kemasan.
- Pemeriksaan: Periksa semua skru dan sambungan secara berkala untuk memastikan ia ketat. Ketatkan semula jika perlu.
- Pengurusan Kabel: Ensure cables remain organized and free from entanglement to prevent damage during height adjustments.
- Penjagaan Motor: The motor is designed for long-term operation. Avoid overloading the desk beyond its maximum weight capacity.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Meja tidak bergerak. | Power cable disconnected; motor cable disconnected; overload. | Check all cable connections. Ensure desk is plugged into a working outlet. Reduce weight on the desk. |
| Meja bergerak tidak sekata. | Transmission rod not properly engaged; uneven weight distribution. | Verify the transmission rod is fully inserted and adjusted. Distribute weight evenly on the desktop. |
| Meja mengeluarkan bunyi yang luar biasa. | Loose screws; obstruction. | Check and tighten all assembly screws. Ensure no objects are obstructing the lifting mechanism. |
| Pratetap memori tidak berfungsi. | Pratetap tidak disimpan dengan betul. | Re-save your desired height settings by pressing "S" then the number button. |
Spesifikasi
- Jenama: ErGear
- Nombor Model: EGESD71V-US
- Reka bentuk Meja: Meja Berdiri Elektrik
- Bahan Desktop: Kayu Kejuruteraan (Berlamina)
- Bahan asas: Keluli Aloi
- warna: Vintage Coklat
- Saiz: 44 x 24 Inci
- Ketinggian Minimum: 28.35 Inci
- Ketinggian Maksimum: 46.46 Inci
- Ketebalan atas meja: 0.75 Inci
- Saran Maksimum Berat: 176 paun
- Perhimpunan Diperlukan: Ya (Disyorkan 1 orang)
- UL Disenaraikan: ya
Maklumat Waranti
ErGear products come with a limited warranty. For specific details regarding your product's warranty coverage, please refer to the documentation included with your purchase or visit the official ErGear webtapak.
- Desktop and Desk Frame: Perlindungan 5 tahun
- Motors and Electrical Components: Perlindungan 2 tahun
Sokongan Pelanggan
If you encounter any issues or have questions regarding your ErGear Electric Standing Desk, please contact our customer support team for assistance.
- Sokongan dalam talian: Visit the official ErGear webtapak untuk Soalan Lazim dan sumber sokongan.
- e-mel: Refer to your product packaging or the ErGear weblaman web untuk alamat e-mel khidmat pelanggan.
- telefon: Refer to your product packaging or the ErGear weblaman web untuk nombor telefon khidmat pelanggan.
