pengenalan
This manual provides detailed instructions for the assembly, operation, and maintenance of your Yaheetech Metal Twin Bed Frame (Model YT-00136885). Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Maklumat Keselamatan
Langkah-langkah Keselamatan Penting:
- Do not load more than 204 kg (450 lb) onto the bed frame.
- Carefully follow all assembly instructions to prevent instability or collapse.
- Berhati-hati di sekeliling tepi tajam semasa pemasangan dan penggunaan.
- Ensure the bed frame is securely assembled to prevent unintended movement.
- Jauhkan bahagian kecil daripada kanak-kanak semasa pemasangan.
Senarai Bahagian
Before assembly, verify that all components listed below are present and undamaged. Refer to the assembly video for visual identification of parts.
Frame Components:
- Bahagian kepala katil dan kaki katil
- Rel Sisi
- Center Support Beam with legs
- Bilah Logam
Perkakasan:
- Various bolts, nuts, and washers (as per included hardware pack)
- Hex key and wrench (provided for assembly)
Arahan Perhimpunan
Follow these steps to assemble your Yaheetech Metal Twin Bed Frame. It is recommended to assemble the bed frame on a soft, clean surface to prevent scratches.
Panduan Video Perhimpunan:
Video 1: Step-by-step assembly guide for the Yaheetech Metal Bed Frame. This video demonstrates the complete assembly process from unboxing to the final structure.
Step-by-Step Written Instructions:
- Pasang Kepala Katil dan Kaki Katil:
Attach the vertical support posts to the decorative headboard/footboard panels using the provided bolts and washers. Ensure all connections are secure but do not fully tighten until all parts are aligned.
Figure 2: Detail of the headboard's curved design, showing the attachment points for the vertical posts. - Pasang Rel Sisi:
Connect the side rails to the assembled headboard and footboard sections. Use the appropriate bolts and washers, ensuring the side rails are correctly oriented. Hand-tighten bolts initially.
- Pasang Pancaran Sokongan Pusat:
Position the center support beam, including its legs, in the middle of the frame. Secure it to the side rails using the designated hardware. This beam provides additional stability.
Figure 3: Illustration of L-shaped plates used to fasten frame components, enhancing structural stability. - Letakkan Bilah Logam:
Lay the metal slats across the frame, fitting them into the designated slots on the side rails. Ensure all slats are evenly spaced and securely seated. The side rails are designed to be higher than the inserted slats to prevent mattress movement.
Figure 4: Detail showing the built-in metal slats and the raised side rail design, which helps to keep the mattress in place. - Pengetatan Akhir:
Once all components are in place and aligned, use the provided hex key and wrench to fully tighten all bolts. Do not overtighten. Verify the frame is stable and level.
Ciri-ciri Produk
- Pembinaan Tahan Lama: Crafted from heavy-duty powder-coated metal for long-lasting use.
- Integrated Headboard and Footboard: Features a curved design that adds to the aesthetic and helps secure bedding.
- Tiada Spring Kotak Diperlukan: The metal slat system provides direct support for your mattress.
- Pengekalan Tilam: Side rails are designed to be higher than the slats, preventing the mattress from sliding.
- Storan Bawah Katil: Offers approximately 13 inches of clearance beneath the frame for storage solutions.
- Tahan Berdecit: Engineered for a stable and quiet sleep experience.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Yaheetech |
| Nombor Model | YT-00136885 |
| Saiz | kembar |
| warna | Hitam |
| bahan | logam |
| Dimensi Produk (L x W x H) | 196.5 x 104.5 x 88.5 cm (77.5 x 41 x 35 inci) |
| Berat Barang | 13.2 kg (29.2 lb) |
| Kapasiti Berat Maksimum | 204 kg (450 lb) |
| Pembersihan Tanah | 13 inci |
| Saiz Tilam Serasi | Katil Berkembar (75" x 39") |
| Ciri Khas | Curved Design Headboard, No Box Spring Needed, Squeak Resistant, Sturdy, Under Bed Storage |
Penyelenggaraan
Untuk memastikan jangka hayat dan prestasi optimum rangka katil anda, ikuti garis panduan penyelenggaraan ini:
- Pembersihan: Lap bingkai logam dengan lembut, damp kain. Elakkan pembersih yang melelas atau bahan kimia keras yang boleh merosakkan kemasan.
- Ketatkan Pengikat: Periksa semua bolt dan skru secara berkala untuk memastikan ia kekal ketat. Ketatkan semula jika perlu untuk mengekalkan kestabilan dan mengelakkan bunyi berderit.
- Elakkan beban berlebihan: Do not exceed the maximum weight capacity of 204 kg (450 lb) to prevent structural damage.
- Penempatan semula: Apabila mengalihkan rangka katil, angkat dan bukannya menyeretnya untuk mengelakkan kerosakan pada bingkai atau lantai anda.
Menyelesaikan masalah
Jika anda menghadapi sebarang masalah dengan rangka katil anda, rujuk masalah dan penyelesaian biasa berikut:
- Bunyi Berdecit:
Squeaking often indicates loose connections. Re-tighten all bolts and screws on the frame, especially where the side rails connect to the headboard/footboard and the center support beam.
- Ketidakstabilan/Goyangan Bingkai:
Ensure all bolts are fully tightened. Verify that the center support legs are making firm contact with the floor. Check that all frame components are correctly aligned as per the assembly instructions.
- Tilam Gelongsor:
The bed frame is designed with raised side rails to minimize mattress sliding. Ensure the mattress is correctly positioned within the frame. If sliding persists, consider using a non-slip mattress pad.
Waranti dan Sokongan
For warranty information or technical support, please refer to the documentation included with your purchase or contact Yaheetech customer service directly. Contact details can typically be found on the manufacturer's webtapak atau resit pembelian anda.
