Baseus BS-CH001 10000mAh Car Jump Starter and Power Bank User Manual

pengenalan

The Baseus BS-CH001 is a versatile device designed to provide emergency jump-starting for 12V vehicles and serve as a portable power bank for charging electronic devices. With a 10000mAh capacity and a peak current of 1000A, it offers a reliable solution for unexpected car battery issues and on-the-go power needs. This manual provides essential instructions for safe and effective use.

Note: Product images and videos are not included in this manual due to a discrepancy between the product description and the available media assets.

Kandungan Pakej

Sila semak pakej untuk item berikut:

• 1 x Baseus Car Jump Starter
• 1 x Smart Jump Starter Clamp Cable (with red and black alligator clips)
• 1 x Kabel Pengecas USB ke Jenis-C

Ciri-ciri Utama

• Prestasi Tinggi: 10000mAh capacity, 12V start voltage, 500A starting current, and 1000A peak current.
• Pelbagai fungsi: Acts as both a car jump starter and a portable power bank.
• Reliable Starts: Capable of starting a car up to 50 times on a single full charge.
• Paparan Bersepadu: Digital screen shows the remaining battery level of the jump starter.
• Rintangan Suhu Melampau: High-performance polymer battery cells ensure operation in very low and high temperatures.
• Keselamatan Lanjutan: Features 9 levels of protection including overcharge, voltage stabilization, short circuit, over-discharge, reverse connection, and over-temperature protection.
• Kuasa Siap Sedia Rendah: Retains up to 85% of stored energy after one year of non-use.
• Lampu LED terbina dalam: Can be used as an emergency flashlight.
• mudah alih: Compact size and technical parameters allow it to be carried on an airplane.

Maklumat Keselamatan

Sila baca semua amaran dan arahan keselamatan sebelum menggunakan produk ini. Kegagalan mematuhi arahan ini boleh mengakibatkan renjatan elektrik, kebakaran dan/atau kecederaan serius.

• Jangan buka, ubah suai atau baiki peranti.
• Jangan dedahkan peranti kepada hujan atau lembapan.
• Jangan gunakan peranti ini jika baterinya kehabisanamps atau kabel rosak.
• Pastikan sambungan kekutuban yang betul (clamp kepada positif, cl hitamamp kepada negatif) untuk mengelakkan litar pintas.
• Jauhkan daripada kanak-kanak.
• Jangan lompat bateri beku.
• Jangan hubungkan cl positif dan negatifampbersama-sama.
• Gunakan peranti di kawasan yang mempunyai pengudaraan yang baik.
• Remove the jump starter from the car battery immediately after starting the vehicle.
• Simpan peranti di tempat yang sejuk dan kering apabila tidak digunakan.

Setup: Charging the Jump Starter

Before first use, fully charge the jump starter. It is recommended to charge the device every 3-6 months to maintain battery health, even when not in use.

1. Connect the provided USB to Type-C charging cable to the Type-C input port on the jump starter.
2. Connect the other end of the USB cable to a suitable USB power adapter (e.g., 5V/2.4A, not included).
3. The digital display will show the charging progress. Charge until the display indicates 100%.
4. Setelah dicas sepenuhnya, cabut kabel pengecasan.

Operating Instructions: Car Jump Starting

Ikuti langkah-langkah ini dengan teliti untuk menghidupkan kenderaan anda secara automatik:

1. Step 1: Connect the Smart Clamp kabel

   Insert the smart jump starter clamp cable into the EC5 interface of the Baseus jump starter. The flashing red and green lights on the clamp indicate it's ready for connection to the car battery.

2. Step 2: Connect to Car Battery

   Open your car's hood. Connect the red positive (+) clamp to the positive (+) terminal of your car battery. Connect the black negative (-) clamp to the negative (-) terminal of your car battery. Ensure a secure connection.
3. Step 3: Start the Vehicle

   Return to your car and start the engine. If the car does not start immediately, wait a few seconds and try again. Do not crank the engine for more than 3 seconds at a time, and wait at least 30 seconds between attempts.

4. Langkah 4: Putuskan sambungan

   Once the car engine starts, immediately remove the smart jump starter clamp cable from the car battery terminals, then disconnect it from the jump starter. Do not drive with the jump starter connected.

Operating Instructions: Power Bank Function

The Baseus BS-CH001 can also be used to charge your electronic devices.

1. Connect your device's charging cable (e.g., USB to Type-C, USB to Lightning) to the USB output port on the jump starter.
2. Connect the other end of the cable to your electronic device.
3. The jump starter will automatically begin charging your device. The digital display will show the remaining power.
4. Once charging is complete, disconnect your device and the cable.

Penyelenggaraan

• Bersihkan peranti dengan kain kering dan lembut. Jangan gunakan pembersih atau pelarut yang melelas.
• Simpan pemula lompat di tempat yang sejuk dan kering, jauh dari cahaya matahari langsung dan suhu yang melampau.
• For optimal battery life, fully charge the device at least once every 3-6 months.
• Simpan clamp cables clean and free from corrosion.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

This product comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Baseus webtapak. Untuk sokongan teknikal, bantuan penyelesaian masalah atau untuk bertanya tentang alat ganti, sila hubungi perkhidmatan pelanggan Baseus melalui saluran rasmi mereka.

Note: No specific warranty period or support contact information was provided in the product data. Please refer to the manufacturer's official resources.