Yaheetech Bathroom Wall Cabinet Instruction Manual

pengenalan

This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your Yaheetech Bathroom Wall Cabinet. Designed for versatile storage in bathrooms, kitchens, living rooms, or laundry areas, this wall-mounted cabinet offers an efficient solution for organizing your space. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Figure 1: Yaheetech Bathroom Wall Cabinet (Model 591775)

Maklumat Keselamatan

AMARAN: Failure to follow these safety instructions may result in injury or product damage.

• Sentiasa ikut arahan pemasangan yang disediakan.
• Ensure the wall-mount cabinet is securely attached to the wall to prevent it from falling. Use appropriate wall anchors for your wall type.
• Do not overload the shelves beyond their weight capacity. The maximum weight capacity for each shelf is 28.7 lb (13 kg).
• Jauhkan bahagian kecil dan bahan pembungkus daripada kanak-kanak semasa pemasangan untuk mengelakkan bahaya tercekik.
• Exercise caution when handling tools during assembly.

Senarai Bahagian

Before assembly, verify that all parts and hardware are present and undamaged. Refer to the assembly video for visual identification of components.

Komponen Utama:

• Panel Sisi (x2)
• Panel Atas (x1)
• Panel Bawah (x1)
• Panel Belakang (x2)
• Adjustable Shelf (x1)
• Pintu (x2)

Hardware (Refer to video for specific labels):

• Pin Dowel
• Cam Locks and Screws
• Engsel dan Skru
• Door Handles and Screws
• Penangkap Pintu Magnetik
• Pin Rak
• Wall Mounting Hardware (screws, anchors)

Arahan Perhimpunan

1. Sediakan Komponen: Lay out all numbered wooden panels and lettered hardware on a clean, soft surface to prevent scratches. Identify each part according to the provided diagrams.
2. Pasang Panel Sisi: Insert dowel pins (C) into the pre-drilled holes on the side panels (1, 2). Attach the top and bottom support bars (3, 4) to the side panels using cam locks and screws (D). Ensure all connections are tight and secure.
3. Pasang Panel Belakang: Slide the two back panels (5) into the grooves on the assembled frame. Secure them in place.
4. Lampirkan Panel Atas: Place the top panel (6) onto the assembled frame, aligning the holes. Secure it using cam locks and screws (B).
5. Install Magnetic Catch: Attach the magnetic door catch (E) to the inside of the top panel using the provided screws.
6. Pasangkan Engsel pada Pintu: Secure the hinges (F) to the pre-drilled holes on the doors (7, 8) using screws (G). Ensure they are firmly attached.
7. Attach Handles to Doors: Install the door handles (I) to the front of the doors using screws (H).
8. Pasang Pintu ke Kabinet: Carefully align the door hinges with the pre-drilled holes on the cabinet frame. Secure the doors by screwing the hinges into the cabinet frame using screws (G). Adjust as necessary for proper alignment.
9. Pasang Rak Boleh Laras: Insert the shelf pins (K) into the desired height holes inside the cabinet. Place the adjustable shelf (9) onto the pins.
10. Pemasangan Dinding: Choose a suitable location on a sturdy wall. Mark the drilling points for the wall mounting hardware. Drill pilot holes and insert wall anchors if necessary. Securely attach the cabinet to the wall using the provided screws and anchors (L). It is highly recommended to mount the cabinet into wall studs for maximum stability. Note that mounting holes may be 14 inches apart, requiring new holes to be drilled 16 inches apart to align with standard wall studs.

Rajah 2: Dimensi Produk

Arahan Operasi

Your Yaheetech Wall Cabinet is designed for ease of use and adaptability.

Rak boleh laras:

The cabinet features an adjustable shelf to accommodate items of various heights. There are 3 pairs of pre-drilled holes inside the cabinet. To adjust the shelf height:

1. Keluarkan semua item dari rak.
2. Carefully lift the shelf off its pins.
3. Relocate the shelf pins to the desired set of holes.
4. Letakkan rak kembali ke atas pin, pastikan ia rata dan kukuh.

Rajah 3: Mekanisme Rak Boleh Laras

Peletakan Serbaguna:

The wall-mounted design allows for flexible use of space below the cabinet. It can be installed in various rooms to suit your storage needs.

Figure 4: Cabinet in Bathroom

Figure 5: Cabinet in Kitchen

Figure 6: Cabinet in Entryway

Figure 7: Cabinet in Office

Penyelenggaraan

Maintaining your Yaheetech cabinet is simple due to its fine surface finish.

• Pembersihan: Lap permukaan kabinet dengan kain lembut,amp kain. Elakkan pembersih yang melelas atau bahan kimia keras yang boleh merosakkan kemasan.
• Tumpahan: Lap sebarang tumpahan dengan segera untuk mengelakkan kerosakan atau kotoran akibat air.
• Perkakasan: Periksa semua skru dan sambungan secara berkala untuk memastikan ia kekal ketat. Ketatkan semula jika perlu.

Figure 8: Easy-to-Clean Surface and Durable Hardware

Menyelesaikan masalah

Jika anda menghadapi masalah dengan kabinet anda, rujuk kepada masalah dan penyelesaian biasa berikut:

• Cabinet Feels Shaky or Unstable:
  • Pastikan semua kunci dan skru sesondol diketatkan sepenuhnya.
  • Verify that the back panels are correctly seated in their grooves and secured.
  • Confirm the cabinet is securely mounted to wall studs. If your wall studs are 16 inches apart and the cabinet's pre-drilled mounting holes are 14 inches apart, you may need to drill new holes to align with the studs for optimal stability.
  • If dowel pins appear too short or connections are loose, contact customer support for assistance.
• Doors Do Not Align Properly:
  • Adjust the hinges. Most cabinet hinges allow for minor adjustments (up/down, left/right, in/out) using a screwdriver. Refer to the hinge manufacturer's instructions if available, or gently adjust screws on the hinges until alignment is achieved.
  • Ensure the cabinet frame itself is square and level before attaching doors.
• Doors Do Not Open Fully When Installed Near a Wall or Another Cabinet:
  • When installing the cabinet against a side wall, ensure there is sufficient clearance (at least the thickness of a piece of plywood) between the cabinet side and the wall for the door to swing open freely.
  • If installing two units side-by-side, allow adequate space (approximately the thickness of two pieces of plywood) between them for both doors to open without obstruction.

Spesifikasi

Waranti dan Sokongan

For warranty information, replacement parts, or technical support, please contact Yaheetech customer service directly through their official website or the retailer where the product was purchased. Please have your model number (591775) and purchase details ready when contacting support.