pengenalan
The Beeitzie B101 Pro is a versatile 2-in-1 Bluetooth 5.4 Transmitter and Receiver designed to enhance your audio experience across various devices. In Transmitter (TX) mode, it allows you to wirelessly stream audio from non-Bluetooth sources like TVs, PCs, and airplane entertainment systems to your Bluetooth headphones or speakers. In Receiver (RX) mode, it transforms your wired speakers, car stereos, or home stereos into Bluetooth-enabled systems, allowing wireless audio streaming from your smartphone or tablet.
Equipped with a Qualcomm Chip and supporting aptX-Adaptive and aptX-Low Latency, the B101 Pro ensures high-quality audio transmission with minimal delay. Its compact design and long battery life make it an ideal companion for travel and home use.
Image: The Beeitzie B101 Pro Bluetooth Transmitter Receiver, shown with its included dual 3.5mm airplane adapter.
Gambarajah Produk
Familiarize yourself with the various components and controls of your Beeitzie B101 Pro device.
Image: A detailed diagram illustrating the various buttons, ports, and LED indicators on the Beeitzie B101 Pro, including the Reset Button, P/R (Pairing/Reset) Button, TX/RX Switch, LED Indicators (APTX, LL, HD, AD, AAC, SBC, A, B, TX, RX), MFB Button, Volume Up/Next Song, Volume Down/Previous Song, Built-in Mic, Lanyard Holes, Charging Indicator, and Type-C Charging Port.
Apa yang ada dalam Kotak
Your Beeitzie B101 Pro package includes the following items:
- Beeitzie B101 Pro Bluetooth Transmitter Receiver
- Kabel Audio RCA
- 3.5mm Audio Female Plug
- Dual 3.5mm Male to Female Adapter (for aircraft)
- Kabel Pengecasan Jenis-C
- Manual Pengguna
- Lanyard
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | B101 |
| Versi Bluetooth | 5.4 |
| Chipset | Cip Qualcomm |
| Codec Audio Disokong | aptX-Adaptive, aptX-Low Latency, aptX, AAC, SBC |
| Jenis Bateri | 1 bateri Lithium Ion (termasuk) |
| Masa Mengecas | Lebih kurang 2 jam |
| Masa Operasi | Lebih 24 jam dengan cas penuh |
| Teknologi Ketersambungan | RCA, Bluetooth, Tambahan |
| Berat Barang | 3.17 auns |
| Dimensi | 5.43 x 4.61 x 0.63 inci |
Persediaan
1. Mengecas Peranti
Before first use, fully charge your Beeitzie B101 Pro. Connect the provided Type-C charging cable to the charging port on the device and plug the other end into a USB power source (e.g., computer USB port, USB wall adapter). The charging indicator light will show charging status and turn off when fully charged. A full charge takes approximately 2 hours and provides over 24 hours of use.
2. Menghidupkan/Mematikan
- Hidupkan kuasa: Slide the TX/RX switch to either the "TX" or "RX" position. The device will power on and the LED indicators will light up.
- Matikan: Slide the TX/RX switch to the "OFF" position. The device will power off.
3. Mode Selection (TX/RX)
The Beeitzie B101 Pro operates in two modes: Transmitter (TX) and Receiver (RX). Select the desired mode using the TX/RX switch on the side of the device.
Image: A visual guide demonstrating the setup for Transmitter Mode (TX) to connect non-Bluetooth devices like TVs, PCs, airplanes, and gaming consoles to Bluetooth headphones/speakers, and Receiver Mode (RX) to connect smartphones/tablets to wired earphones, car stereos, or wired speakers.
Arahan Operasi
Mod Pemancar (TX).
In TX mode, the B101 Pro transmits audio from a non-Bluetooth source to your Bluetooth headphones or speakers.
Image: An illustration of the Beeitzie B101 Pro in Transmitter (TX) mode, connecting to devices such as gaming consoles, airplane entertainment systems, gym equipment, and televisions, and transmitting audio to Bluetooth earbuds, speakers, or headphones.
Single Device Pairing (TX Mode)
- Slide the TX/RX switch to the "TX" position. The "TX" light will flash rapidly, indicating it's in pairing mode.
- Put your Bluetooth headphones/earbuds into pairing mode. For AirPods, open the lid and hold the button on the back of the case for 5 seconds.
- Place the B101 Pro close to your headphones/earbuds. They should automatically connect. The "TX" light will become solid, and the "A" indicator will light up, indicating a successful connection.
- Connect the B101 Pro to your audio source (e.g., TV, PC, airplane entertainment system) using the appropriate 3.5mm AUX cable or RCA cable.
Image: Step-by-step visual instructions for the first pairing in TX mode, showing how to put AirPods into pairing mode and connect them to the B101 Pro, followed by connecting the B101 Pro to an audio output device.
Dual Device Pairing (TX Mode)
The B101 Pro supports connecting two Bluetooth headphones/earbuds simultaneously for shared listening.
- Ensure your first device is already paired and connected (as per "Single Device Pairing"). The "A" indicator should be lit.
- Double-click the "P/R" button on the B101 Pro. The "TX" light will flash rapidly again.
- Put your second Bluetooth headphones/earbuds into pairing mode.
- Once connected, the "B" indicator will light up, confirming both devices are paired.
Image: A person using the Beeitzie B101 Pro to connect two pairs of headphones to an airplane's entertainment system, demonstrating the dual connection feature.
Image: Visual instructions for dual pairing in TX mode, showing how to pair a second headset after the first one is connected, by double-clicking the P/R button.
Using with Airplane Entertainment Systems
The B101 Pro includes a dual 3.5mm AUX adapter for compatibility with various airplane audio interfaces. Simply plug the adapter into the airplane's audio jack, then connect the B101 Pro to the adapter.
Video: Demonstrates how to use the Beeitzie B101 Pro as a Bluetooth connector for airplane entertainment systems, allowing wireless audio with your personal headphones.
Mod Penerima (RX).
In RX mode, the B101 Pro receives audio from your Bluetooth-enabled device (e.g., smartphone, tablet) and outputs it to a wired audio system.
Image: An illustration of the Beeitzie B101 Pro in Receiver (RX) mode, connecting to wired earphones, car stereos, or wired speakers, and receiving audio wirelessly from a tablet, cell phone, or computer.
Single Device Pairing (RX Mode)
- Slide the TX/RX switch to the "RX" position. The "RX" light will flash rapidly, indicating it's in pairing mode.
- On your smartphone or tablet, go to Bluetooth settings and search for "B101 Pro".
- Select "B101 Pro" to connect. The "RX" light will become solid, and the "A" indicator will light up, indicating a successful connection.
- Connect the B101 Pro to your wired speakers, car stereo, or home stereo using the 3.5mm AUX cable.
Image: Step-by-step visual instructions for the first pairing in RX mode, showing how to set the B101 Pro to RX, find it in a smartphone's Bluetooth settings, and connect it to an audio input device.
Dual Device Pairing (RX Mode)
You can connect two smartphones or tablets to the B101 Pro in RX mode.
- Ensure your first device is already paired and connected. The "A" indicator should be lit.
- Double-click the "P/R" button on the B101 Pro. The "RX" light will flash rapidly again.
- On your second smartphone or tablet, search for "B101 Pro" in Bluetooth settings and connect.
- Once connected, the "B" indicator will light up, confirming both devices are paired.
Image: Visual instructions for dual pairing in RX mode, showing how to pair a second smartphone after the first one is connected, by double-clicking the P/R button.
Kawalan Kelantangan
Use the '+' and '-' buttons on the B101 Pro to adjust the volume. A short press adjusts volume, while a long press may skip tracks depending on the mode and connected device.
Menetapkan semula Peranti
If you experience reconnection or compatibility issues, you can reset the device. Long-press the "P/R" button for 8 seconds to reset pairing and clear all historical data.
Penyelenggaraan
- Pastikan peranti kering. Kelembapan boleh merosakkan litar dalaman.
- Jangan dedahkan peranti kepada suhu yang melampau.
- Bersihkan peranti dengan kain lembut dan kering. Elakkan menggunakan bahan kimia yang keras atau bahan yang melelas.
- Simpan peranti di tempat yang sejuk dan kering apabila tidak digunakan.
Menyelesaikan masalah
| Masalah | Penyelesaian yang Mungkin |
|---|---|
| Peranti tidak dapat dihidupkan. | Ensure the battery is charged. Connect to a power source using the Type-C cable. |
| Tidak boleh berpasangan dengan peranti. |
|
| Low-quality audio or static. |
|
| Audio delay (latency). |
|
Maklumat Keselamatan
This product meets global quality standards, certified by FCC, CE, RoHS, BQB, and others. It ensures safety with features such as voltage endurance, overcurrent, short circuit, and NTC overheat protection. Always follow local regulations for disposal.
Waranti dan Sokongan
For warranty information and technical support, please refer to the contact details provided in the packaging or visit the official Beeitzie webtapak. Simpan resit pembelian anda untuk tuntutan waranti.
