pengenalan
Thank you for choosing the HOFTRONIC Q-Series 120cm LED Batten. This robust and waterproof LED fixture is designed for easy installation and provides efficient, high-quality illumination. It is suitable for a wide range of environments, including basements, garages, workshops, and warehouses. This manual provides essential information for safe installation, operation, and maintenance of your new LED batten.
The Q-Series LED batten features an integrated light source, eliminating the need for separate LED tubes. Its energy-efficient design consumes only 36 watts while delivering 4320 lumens, offering significant energy savings compared to traditional fluorescent fixtures.
Arahan Keselamatan
- Keselamatan Elektrik: Installation must be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure the power supply is disconnected before any installation, maintenance, or repair work.
- Voltage: This fixture operates on 230 Volts. Verify your power supply matches this requirement.
- Pengendalian: Handle the fixture with care to avoid damage. Do not drop or subject it to excessive force.
- Persekitaran: The fixture is rated IP65 for water and dust resistance and IK08 for impact protection, making it suitable for both indoor and outdoor use in demanding environments. However, avoid direct exposure to corrosive chemicals unless specifically designed for such conditions.
- Suhu: Operate the fixture within the specified temperature range of -20°C to +40°C.
- Pengubahsuaian: Do not attempt to modify or disassemble the fixture. This will void the warranty and may pose a safety risk.
Kandungan Pakej
Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:
- HOFTRONIC Q-Series 120cm LED Batten (with integrated LED light source)
- Mounting clips (stainless steel)
- Screws and wall plugs for mounting
- Quick connection clips
Spesifikasi
| Spesifikasi | Nilai |
|---|---|
| Jenama | HOFTRONIK |
| Nombor Model | 2711559 |
| Dimensi (L x W x H) | 120 x 5.7 x 4.7 cm |
| Berat badan | 5 Kilogram |
| bahan | Polikarbonat (PC) |
| Penggunaan Kuasa | 36 Watt |
| Fluks Bercahaya | 4320 Lumen |
| Suhu Warna | 6500 Kelvin (Putih Sejuk) |
| Voltage | 230 Volt |
| Penarafan IP | IP65 (kalis air dan habuk) |
| Penilaian IK | IK08 (Impact Protection) |
| Purata Jangka Hayat | 25,000 hours (approx. 10 years with average use) |
| Ciri Khas | Plug and Play, Quick Mounting, Linkable (up to 20 units), Flicker-free |
For detailed energy efficiency information, please refer to the EPREL database:
Image: Energy efficiency label showing the product's energy class and consumption.
Persediaan dan Pemasangan
Sebelum anda memulakan: Pastikan bekalan kuasa utama dimatikan pada pemutus litar.
1. Memasang Lekapan
- Determine the desired mounting location on the ceiling or wall.
- Mark the positions for the mounting clips. Use the fixture itself or measure the distance between the clip attachment points.
- Gerudi lubang pada kedudukan yang ditanda dan masukkan palam dinding.
- Secure the stainless steel mounting clips to the surface using the provided screws.
- Align the LED batten with the mounted clips and press firmly until it clicks into place.
Image: Illustration of the mounting process, showing drilling, securing clips, and attaching the fixture.
2. Sambungan elektrik
The HOFTRONIC Q-Series LED Batten features a quick connect system for easy wiring.
- Open the quick connect terminal cover at one end of the fixture.
- Connect the live (L), neutral (N), and ground (PE) wires from your power supply to the corresponding terminals. Ensure a secure connection.
- Close the terminal cover securely.
Imej: Terperinci view of the quick connect mechanism for electrical wiring.
3. Linking Multiple Fixtures (Optional)
Up to 20 Q-Series battens can be linked together using the integrated quick connectors and a suitable connecting cable (min. 5mm / max. 9mm diameter, PG11 cable gland compatible).
- After mounting the first fixture and connecting it to the power supply, prepare the connecting cable.
- Insert one end of the connecting cable into the quick connect port of the first fixture.
- Mount the next fixture and insert the other end of the connecting cable into its quick connect port.
- Repeat for additional fixtures, ensuring all connections are secure.
Image: Illustration demonstrating the linking capability of multiple HOFTRONIC Q-Series fixtures.
Once all fixtures are mounted and wired, restore power to the circuit.
Arahan Operasi
The HOFTRONIC Q-Series LED Batten operates immediately upon receiving power. There are no complex controls or settings. Simply switch on the power supply to illuminate the fixture, and switch it off to turn it off.
The fixture provides a diffuse light output, which helps to reduce glare and create a more comfortable lighting environment.
Image: Visual comparison illustrating the diffuse light provided by the HOFTRONIC Q-Series LED Batten.
Penyelenggaraan
The HOFTRONIC Q-Series LED Batten requires minimal maintenance due to its durable construction and integrated LED technology.
- Pembersihan: Disconnect power before cleaning. Wipe the exterior of the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate material.
- Pemeriksaan: Periodically inspect the fixture for any signs of damage, loose connections, or excessive dirt accumulation. Address any issues promptly.
- Tiada Bahagian Boleh Diservis Pengguna: The LED light source is integrated and not user-replaceable. Do not attempt to open the fixture.
Menyelesaikan masalah
If you encounter issues with your HOFTRONIC Q-Series LED Batten, refer to the following common troubleshooting steps:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lekapan tidak menyala | Tiada bekalan kuasa Sambungan pendawaian longgar Lekapan yang rosak | Periksa pemutus litar dan suis dinding. Pastikan semua sambungan elektrik kukuh (matikan kuasa terlebih dahulu). Jika penyelesaian lain gagal, hubungi khidmat pelanggan. |
| Cahaya berkelip-kelip | Bekalan kuasa tidak stabil Sambungan pendawaian longgar | Periksa kestabilan sumber kuasa. Verify all wiring connections are tight (power off first). |
| Kecerahan berkurangan | Pengumpulan kotoran atau habuk | Clean the fixture's surface (power off first). |
Jika masalah berterusan selepas mencuba penyelesaian ini, sila hubungi khidmat pelanggan HOFTRONIC.
Waranti dan Sokongan
HOFTRONIC provides a Waranti 2 tahun for this Q-Series LED Batten, covering defects in materials and workmanship under normal use. This warranty period begins from the date of purchase.
The warranty does not cover damage caused by improper installation, misuse, accidents, unauthorized modifications, or natural disasters.
Untuk tuntutan jaminan, sokongan teknikal atau sebarang pertanyaan mengenai produk anda, sila hubungi khidmat pelanggan HOFTRONIC melalui peruncit anda atau pejabat rasmi HOFTRONIC. website. Please have your proof of purchase and model number (2711559) ready when contacting support.
Aplikasi Produk
The HOFTRONIC Q-Series LED Batten is versatile and suitable for a variety of applications, thanks to its robust and waterproof design:
- Perindustrian: Warehouses, factories, production halls.
- Komersil: Supermarkets, retail spaces, workshops, car repair shops.
- Kediaman: Garages, basements, utility rooms.
- khusus: Cold storage rooms, car washes, outdoor covered areas.
Imej: Cthamples of the LED batten installed in industrial environments such as car washes, large warehouses, and cold storage facilities.
Imej: Cthamples of the LED batten installed in commercial and residential settings, including supermarkets, workshops, and garages.
Dimensi Produk
Refer to the diagram below for detailed dimensions of the HOFTRONIC Q-Series LED Batten.
Image: Technical drawing illustrating the length (1200mm) and other key dimensions of the LED batten.
