1. Pengenalan
Thank you for choosing the Sunco LED Shop Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
Image 1.1: Sunco 4ft LED Shop Light
2. Maklumat Keselamatan
Untuk mengurangkan risiko kematian, kecederaan diri atau kerosakan harta benda akibat kebakaran, renjatan elektrik, bahagian yang jatuh, luka, lelasan dan bahaya lain, sila baca semua amaran dan arahan yang disertakan dengan dan pada kotak lekapan dan semua label lekapan.
- AMARAN: Risiko Renjatan Elektrik. Putuskan sambungan kuasa pada fius atau pemutus litar sebelum pemasangan atau servis.
- AMARAN: Risiko Kebakaran. Minimum 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
- WARNING: Risk of Injury. Pakai cermin mata dan sarung tangan keselamatan semasa pemasangan dan servis.
- Lekapan ini bertujuan untuk kegunaan dalaman sahaja. Do not use in wet locations or where directly exposed to water.
- Perlawanan ini adalah tidak boleh dimalapkan. Do not connect to a dimmer switch.
- Jangan ubah suai lekapan. Sebarang pengubahsuaian boleh membatalkan jaminan dan menimbulkan bahaya keselamatan.
- Pastikan bekalan voltage is compatible with the fixture (120V-277V).
3. Kandungan Pakej
Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:
- 2 x Sunco LED Shop Light Fixtures
- Mounting Equipment (Surface)
4. Persediaan dan Pemasangan
Follow these steps for a quick and easy setup. Always ensure power is disconnected at the source before proceeding.
- Sediakan Lokasi Pemasangan: Identify the desired ceiling location for the fixture. Ensure the mounting surface is capable of supporting the fixture's weight.
- Pasang Perkakasan Pemasangan: Use the provided mounting equipment to securely attach the fixture housing to the ceiling. Refer to Image 4.1, Step 1.
- Sambung wayar: Carefully connect the electrical wires from the power supply to the fixture's wires. Ensure proper polarity (live to live, neutral to neutral, ground to ground). Refer to Image 4.1, Step 2.
- Lekapan Selamat: Once wiring is complete, snap the fixture into place, ensuring it is firmly seated against the mounting surface. Refer to Image 4.1, Step 3.
Image 4.1: Installation Steps
Daisy Chain Linkability
This fixture features daisy chain linkability, allowing multiple units to be connected for extended lighting coverage. To link fixtures, knock out the designated punch hole on the end of the fixture and connect the wires to the next unit. Ensure the total wattage of linked fixtures does not exceed the circuit's capacity.
Image 4.2: Daisy Chain Connection Point
5. Arahan Operasi
The Sunco LED Shop Light is designed for simple operation and provides instant illumination upon activation.
Selectable Color Temperature (CCT)
Your fixture includes an integrated switch to select between three color temperatures: 4000K (Cool White), 5000K (Daylight), and 6000K (Bright White). Locate the CCT switch on the fixture and slide it to your desired setting before or after installation. The light will turn on instantaneously at the selected color temperature.
Image 5.1: Selectable CCT Options
6. Penyelenggaraan
The Sunco LED Shop Light is designed for long-lasting performance with minimal maintenance.
- Pembersihan: Ensure the power is off before cleaning. Wipe the exterior of the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the finish or optical components.
- LED: The integrated LED light source is designed for a long lifespan (50,000 hours) and is not user-replaceable.
7. Penyelesaian masalah
If you experience issues with your Sunco LED Shop Light, refer to the following common troubleshooting steps:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lampu tidak menyala | Tiada bekalan kuasa Pendawaian yang salah CCT switch not set | Periksa pemutus litar dan suis dinding. Verify all wire connections are secure and correct. Ensure the CCT switch is set to a valid color temperature. |
| Cahaya berkelip-kelip | Bekalan kuasa tidak stabil Sambungan pendawaian longgar | Pastikan bekalan kuasa stabil dan dalam vol yang ditentukantagjulat e. Periksa semua sambungan wayar untuk ketat. |
| Cahaya tidak terang seperti yang diharapkan | Tetapan CCT yang salah Debu atau serpihan pada kanta | Adjust the CCT switch to a brighter setting (e.g., 6000K). Clean the lens according to maintenance instructions. |
8. Spesifikasi
| Jenama | Lampu Sunco |
| Nombor Model | WR_PR8-WH-4060K-2PK |
| Dimensi Produk | 48"L x 8.58"W x 2.56"H |
| Wattage | 60W |
| Kecerahan | 7200 Lumen |
| Kecekapan | 118 LM/W |
| Suhu Warna (CCT) | Selectable 4000K, 5000K, 6000K |
| Voltage | 120V-277V |
| Boleh dimalapkan | Tidak |
| Penggunaan Dalaman/Luar | Dalaman sahaja |
| Jenis Pemasangan | Gunung siram |
| Ciri Khas | Boleh dihubungkan |
| Jenis Sumber Cahaya | LED |
| bahan | Alloy Steel, Polycarbonate |
| Kehidupan Purata | 50,000 Jam |
| Pensijilan | ETL, FCC, RoHS |
| Bilangan Item | 2 (Pack) |
9. Waranti dan Sokongan
Sunco Lighting stands behind the quality of its products.
- Waranti: Produk ini disokong oleh Waranti 3 Tahun dari tarikh pembelian. Sila simpan bukti pembelian anda untuk tuntutan waranti.
- Sokongan Pelanggan: For technical assistance, troubleshooting, or warranty inquiries, please contact Sunco Lighting customer support. Our knowledgeable support specialists are available to assist you.
Video 9.1: Get to Know Sunco Lighting - Learn about Sunco's commitment to quality and customer satisfaction.
