ABSINA Mobile Wallbox 11 kW 16A with App Control

1. Pengenalan

The ABSINA Mobile Wallbox 11 kW 16A is a versatile and portable charging solution for electric vehicles. Designed for both home and travel use, it offers convenient and safe charging with integrated app control and RFID activation. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your device.

Figure 1: ABSINA Mobile Wallbox 11 kW 16A. This image shows the compact design of the wallbox with its CEE plug and Type 2 charging connector.

2. Arahan Keselamatan

Sila baca semua arahan keselamatan dengan teliti sebelum menggunakan peranti ini. Kegagalan mematuhi arahan ini boleh mengakibatkan renjatan elektrik, kebakaran atau kecederaan serius.

• Ensure the power supply meets the specified requirements (3 phases 415 V 50/60 Hz).
• Jangan gunakan peranti jika kabel atau palam rosak.
• Do not attempt to open or repair the device yourself. Contact qualified personnel for service.
• Keep the device away from water and extreme temperatures. The device is IP65 rated, but avoid submersion.
• Sentiasa pastikan pembumian yang betul.
• The integrated Type A+DC6 mA residual current circuit breaker provides enhanced safety. Do not bypass or modify it.
• Before installation, contact your local grid operator to register the wallbox as required.

Figure 2: Maximum Safety Features. The image highlights the Type A 30mA AC residual current protection and Type B 6mA DC fault current protection for enhanced user safety.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• ABSINA Mobile Wallbox 11 kW 16 A (three-phase)
• 3 x RFID Chips
• 3 x Kad RFID
• Pendakap Pelekap Dinding
• Bahan Pemasangan (skru, sauh)
• Manual Pengguna (dokumen ini)

4. Persediaan dan Pemasangan

The ABSINA Mobile Wallbox is designed for "Plug and Play" use, requiring no complex installation. However, for permanent mounting, a wall bracket is included.

4.1 Persediaan Awal (Pasang dan Main)

1. Sambung ke Kuasa: Insert the CEE plug of the Wallbox into a compatible 3-phase 415 V 50/60 Hz CEE socket.
2. Hidupkan kuasa: The Wallbox will power on automatically. If the indicator light blinks red, press the emergency stop button once to reset.
3. Sedia untuk Digunakan: The Wallbox is now ready for charging, which can be activated via RFID or the app.

Figure 3: Plug & Play Functionality. This image illustrates the simple connection of the CEE plug to a power outlet, emphasizing ease of use without complex electrical installation.

4.2 Pemasangan Dinding (Pilihan)

For a more permanent setup, use the provided wall mount bracket and hardware.

1. Pilih Lokasi: Select a suitable wall location near a compatible CEE socket, ensuring adequate ventilation and protection from direct weather exposure (though the unit is IP65 rated).
2. Tandakan Titik Penggerudian: Use the wall mount bracket to mark the drilling points on the wall.
3. Lubang gerudi: Drill holes at the marked points and insert the provided anchors.
4. Kurungan Selamat: Attach the wall mount bracket to the wall using the screws.
5. Mount Wallbox: Carefully slide the Wallbox onto the mounted bracket until it clicks securely into place.

Figure 4: Easy Operation. The image shows the Wallbox mounted on a wall, connected to a vehicle, demonstrating its simple "Connect. Charge." principle.

5. Arahan Operasi

5.1 Charging Your Electric Vehicle

1. Connect Vehicle: Plug the Type 2 charging cable from the Wallbox into your electric vehicle's charging port.
2. Activate Charging:
   • Using RFID: Hold one of the provided RFID chips or cards over the RFID reader area on the Wallbox. The Wallbox will activate, and charging will begin.
   • Menggunakan Apl: Open the ABSINA app (or compatible smart home app like Tuya Smart) on your smartphone. Select the Wallbox and initiate charging from the app interface.
3. Pengecasan Monitor: The app provides real-time data including charging voltage (V), current (A), power (kW), charged energy (kWh), and charging time.
4. Berhenti Mengecas:
   • Using RFID: Hold the RFID chip/card over the reader again to stop charging.
   • Menggunakan Apl: Stop charging directly from the app.
5. Disconnect Vehicle: Once charging is complete or stopped, unplug the Type 2 cable from your vehicle.

Figure 5: Misuse Protection. The image shows a hand activating the Wallbox with an RFID chip, illustrating the secure activation method.

5.2 Ciri Kawalan Aplikasi

The dedicated app (or compatible smart home app) provides advanced control and monitoring capabilities:

• Adjust Charging Current: Set the charging current from 8 A to 16 A in 1 A increments to manage charging speed.
• Set Charging Mode: Choose preferred charging modes.
• Jadualkan Pengecasan: Utilize the charging delay function to start charging at a later time.
• Monitor Real-time Data: View live charging statistics.
• Mula/Berhenti Jauh: Control charging sessions from your smartphone.

Nota: While the app displays charging data, this data is typically not stored permanently on the device once the charging cable is disconnected. For historical charging data, refer to your vehicle's own app if available.

6. Penyelenggaraan

To ensure the longevity and optimal performance of your ABSINA Mobile Wallbox, follow these maintenance guidelines:

• Pembersihan: Wipe the exterior of the Wallbox with a soft, damp kain. Jangan gunakan pembersih atau pelarut yang kasar. Pastikan peranti telah dicabut daripada plag sebelum membersihkan.
• Pemeriksaan Kabel: Regularly inspect the charging cable and CEE plug for any signs of damage, fraying, or wear. If damage is found, discontinue use immediately and contact support.
• Penjagaan Penyambung: Keep the Type 2 connector clean and free of debris. Ensure the protective cap is in place when not in use.
• Storan: When not in use, especially during travel, store the Wallbox in a dry, cool place, protected from direct sunlight and extreme temperatures.

Figure 6: Mobile Wallbox for Travel. This image shows the Wallbox conveniently stored in a car trunk, highlighting its portability and ease of transport.

7. Penyelesaian masalah

If you encounter issues with your ABSINA Mobile Wallbox, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact ABSINA customer support.

8. Spesifikasi

9. Waranti dan Sokongan

ABSINA products are designed for reliability and performance. For warranty information and technical support, please refer to the official ABSINA webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung.

The manufacturer, ABSINA GmbH, is based in Germany and is committed to providing competent support.

Maklumat Hubungan: Please visit the official ABSINA website for the most up-to-date contact details for customer support and warranty claims.