Manual Pengguna Pengawal Cas Suria ATEM POWER 10A MPPT

Produk Selesaiview

The ATEM POWER 10A MPPT Solar Charge Controller is a compact and intelligent device designed to efficiently charge various battery types using solar panels. It features high conversion efficiency and automatic voltage recognition for 12V or 24V systems. This controller is essential for protecting your battery from overcharging and ensuring optimal performance in solar power setups.

Figure 1: ATEM POWER 10A MPPT Solar Charge Controller with Anderson Style plugs.

Maklumat Keselamatan

Please read all warnings and safety instructions carefully before installation and operation to prevent personal injury or product damage.

• Langkah Keselamatan Am:
  • Produk ini tidak bertujuan untuk digunakan oleh orang yang kurang keupayaan fizikal, deria atau mental, atau kurang pengalaman atau pengetahuan. Kanak-kanak harus diawasi untuk memastikan mereka tidak bermain dengan produk tersebut.
  • JANGAN sesekali mengendalikan produk dalam persekitaran yang basah, atau di tapak di mana letupan gas atau habuk boleh berlaku.
  • JANGAN SEKALI-KALI menyentuh hujung kabel yang tidak berpenebat dan gunakan alat berpenebat SAHAJA.
  • Pemasang mesti menyediakan cara untuk melegakan ketegangan kabel untuk mengelakkan penghantaran tekanan kepada sambungan.
  • Pengawal MPPT HANYA direka untuk mengawal panel solar.
  • JANGAN membalikkan kekutuban sambungan bateri kepada pengawal MPPT. Kemungkinan besar pengawal akan terbakar jika ia disambungkan ke panel solar dengan sambungan bateri terbalik.
  • Sila tetapkan jenis bateri yang betul pada kali pertama anda menggunakan.
  • Semua bateri asid plumbum menghasilkan gas meletup yang berbahaya. Bateri hendaklah dipasang di kawasan yang mempunyai pengudaraan yang baik, sejauh mungkin dari mana-mana sumber pencucuhan. JANGAN merokok atau mempunyai nyalaan terbuka di sekitar bateri yang sedang dicas.
  • Keep the battery away from any metal objects which may cause a short circuit of the terminals.
  • Ventilation is highly recommended when mounting the controller in an enclosed enclosure with flooded batteries. Battery gases from flooded batteries can cause corrosion and destroy the controller circuits.
  • Loose power connections and corroded wires may result in high heat that can melt or burn surrounding materials, or even cause fire. Ensure tight connections and use cable ties to secure cables and prevent them from unnecessary movement.
• Keselamatan Bateri:
  • Sila ambil perhatian bahawa pengawal ini HANYA serasi dengan asid plumbum, AGM, GEL, kalsium atau bateri LiFePO4.
  • Be cautious when working with lead acid batteries. Immediately rinse the affected area with water and seek medical assistance if lead acid comes into contact with your eyes or skin.
  • JANGAN sambungkan sebarang penyongsang atau pengecas bateri ke dalam terminal beban pengawal.
  • NEVER connect battery terminals to the controller BEFORE connecting the solar panel to the controller.
  • JANGAN sesekali sambungkan panel solar kepada pengawal sehingga bateri disambungkan.
  • JANGAN gunakan pengawal untuk mengecas bateri yang tidak boleh dicas semula. Melakukannya boleh mengakibatkan kemudaratan kepada pengguna dan/atau merosakkan panel solar, bateri dan pengawal.
  • Refer to the specifications provided by the manufacturer of the battery to ensure that the battery is suitable for use with this product. The battery manufacturer's safety instructions should always be observed.
  • Pengawal akan mencapai prestasi optimum apabila penyelenggaraan bateri yang betul dilakukan secara berkala.

Persediaan dan Pemasangan

The ATEM POWER 10A MPPT Solar Charge Controller is designed for effortless DIY setup. Follow these steps for proper connection:

1. Sambungkan bateri litium ke pengawal cas.
2. Sambungkan panel solar kepada pengawal, dan konfigurasikan jenis bateri.
3. Apabila dalam mod bateri litium, pengawal cas secara automatik membolehkan fungsi pengaktifan dan bekalan voltage untuk mengaktifkan bateri.
4. Jika voltage gagal meningkat, ini mungkin menunjukkan bahawa bateri anda rosak. Sila hubungi pusat khidmat pelanggan kami untuk mendapatkan bantuan profesional.

Figure 2: Connection diagram showing solar panel to controller and controller to battery.

The controller comes with integrated Anderson Style plugs for easy and secure connections. A polarity reversed adapter is included for convenience.

Figure 3: The compact design and Anderson Style plugs make installation simple.

Operasi

Exterior Interface and Indicators

The controller features LED indicators to show charging status and battery type. While charging, the indicator will flash, and a full charge is indicated when all three indicators are lit. If there is an abnormal battery voltage, all three indicators will flash simultaneously.

Figure 4: The controller's LED indicators provide visual feedback on charging status and battery type.

Pemilihan Jenis Bateri

To select the battery type, long press the 'BATTERY TYPE' button for 3 seconds to enter the battery type selection mode. The LED indicator will then flash, indicating the current battery type. To switch between different battery types, simply press the 'BATTERY TYPE' button once. Once you have selected the desired battery type, exit the mode by holding the button for 3 seconds. This operation comes with power-off memory, eliminating the need to reselect the battery type after the charger restarts.

Figure 5: The controller supports Lead Acid, AGM/Gel, Calcium, and LiFePO4 battery types.

Efficiency and Protection

The MPPT technology ensures up to 95% conversion efficiency and 99.99% tracking efficiency, maximizing power harvest from your solar panels. The controller also includes comprehensive protection features:

• Perlindungan Polariti Terbalik
• Di bawah voltage Perlindungan
• Perlindungan lebihan semasa
• Perlindungan suhu berlebihan
• Perlindungan litar pintas

Figure 6: Built-in protection systems ensure safe and reliable operation.

Penyelenggaraan dan Pembersihan

To maintain the controller's performance, it is recommended that the following maintenance be carried out:

• Pastikan pengawal dipasang dengan selamat dalam ambien yang bersih dan kering.
• Pastikan tiada sekatan pada aliran udara di sekeliling pengawal.
• Ensure the controller is clean and periodically check the terminals to ensure they're clean before plugging in.
• Periksa pendawaian terdedah antara panel solar dan bateri. Baiki atau ganti beberapa wayar jika perlu.
• Ensure that all the system components are ground connected tightly and correctly.

Menyelesaikan masalah

If you encounter issues with your ATEM POWER Solar Charge Controller, refer to the common problems and solutions below:

S: Bateri saya tidak dicas.

A: Possible causes can be:

• Kabel bateri longgar atau hilang.
• Sambungan kabel longgar, atau terminal kabel berkelim teruk.
• Kabel bateri hilang atau tidak berwayar dengan betul.
• Tetapan yang salah.
• Kekutuban yang salah.
• Bateri sudah penuh.

S: Bateri saya kurang dicas.

A: Possible causes can be:

• Terlalu banyak beban DC.
• Pengecasan bateri voltages terlalu rendah.
• Bateri hampir penuh.
• Solar tidak mencukupi.

S: Pengawal saya tidak dapat mencapai output berkadar penuhnya.

A: Possible causes can be:

• Tatasusunan PV terlalu kecil.
• Temperature above 45°C or below -10°C.

Sila pastikan anda memberitahu kami jika anda masih mengalami sebarang masalah di pihak anda dengan menghubungi pusat pelanggan kami.

Spesifikasi

Bateri Voltage Parameter

Waranti dan Sokongan

ATEM POWER (Manufacturer) warrants to the original purchaser ("User") that its MPPT solar charge controller, if purchased from Manufacturer or an authorized distributor or dealer, will be free of defects in material and/or workmanship under normal application, installation, use and service conditions from the date sold and for the duration (the "Warranty Period") of 1 YEAR. Within the Warranty Period, subject to the exclusions listed below, the Manufacturer will replace or repair the MPPT solar charge controller. If the components in question are determined to be defective in material or workmanship, if the Manufacturer deems the MPPT solar charge controller to be not repairable, a new, similar controller will be offered, or a refund will be issued. This Limited Warranty is to the original purchaser of the MPPT solar charge controller and is not transferable to any other person or entity.

Pengecualian:

This warranty does not cover defects that are caused by normal wear and tear, inadequate maintenance, transportation, storage or faulty repair, misuse, neglect, accident or failure to observe installation, improper installation. It is recommended that the installation should be performed by qualified personnel or the warranty will be voided. For further clarity, this warranty is also void if the MPPT solar charge controller:

• digunakan untuk aplikasi selain daripada yang ia direka dan dimaksudkan untuknya.
• tidak dipasang dengan betul mengikut manual pengguna.
• is disassembled, altered, or repaired by someone other than an authorized Manufacturer's agent.
• has been subject to misuse, abuse or physical damage, or has been modified, altered.
• telah rosak akibat force majeure (cth. overvoltage, ribut, api).
• yang dipilih oleh pengguna bukan saiz dan reka bentuk yang betul untuk aplikasi yang dimaksudkan.

Tuntutan:

Request return authorization. No returns will be credited without an authorization. If an ATEM POWER product is suspected of being defective, you'll need to provide proof of purchase (e.g. a screenshot of the order) and a picture of the damaged goods in their entirety to service@atempower.com atau penjual yang anda beli untuk penilaian. Pengilang tidak akan bertanggungjawab ke atas apa-apa kerugian atau kerosakan dalam apa-apa jenis lain, sama ada secara langsung, sampingan, berbangkit termasuk kehilangan keuntungan, teladan, istimewa atau sebaliknya, termasuk apa-apa kehilangan keuntungan atau perbelanjaan pengalihan, penghantaran atau pemasangan.

Untuk maklumat lanjut, sila layari: www.atempower.com