VECYS Hot and Cold Water Cooler Dispenser Instruction Manual

1. Pengenalan

This manual provides detailed instructions for the safe and efficient operation, installation, and maintenance of your VECYS Hot and Cold Water Cooler Dispenser. Please read this manual thoroughly before using the appliance and retain it for future reference.

Imej 1.1: Depan view of the VECYS Hot and Cold Water Cooler Dispenser.

The VECYS water cooler dispenser is designed to provide instant access to both hot and cold water. It features a high-efficiency compressor for rapid cooling and heating, a child safety lock for hot water, and a durable 304 stainless steel inner water tank for water purity.

2. Maklumat Keselamatan Penting

To reduce the risk of injury or property damage, always follow basic safety precautions when using electrical appliances. Read all instructions before using this dispenser.

• Keselamatan Elektrik: Ensure the dispenser is connected to a grounded electrical outlet with the correct voltage. Do not use extension cords.
• Kunci Keselamatan Kanak-kanak: The hot water spout is equipped with a child safety lock. Always engage this lock when not in use to prevent accidental burns.
• penempatan: Place the dispenser on a flat, stable surface away from direct sunlight and heat sources. Ensure adequate ventilation around the unit.
• Kualiti Air: Use only potable water. Do not operate the dispenser without a water bottle installed.
• Penyelenggaraan: Cabut plag dispenser sebelum membersihkan atau melakukan sebarang penyelenggaraan.

Image 2.1: Key features of the water cooler, highlighting the child safety lock and ETL listing for safety.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• VECYS Hot and Cold Water Cooler Dispenser Unit
• Dulang Titis
• Manual Arahan (dokumen ini)

4. Persediaan dan Pemasangan

Follow these steps to set up your water dispenser:

1. Bongkar: Tanggalkan dispenser daripada pembungkusannya dengan berhati-hati.
2. penempatan: Place the dispenser upright on a level, stable surface. Ensure there is at least 4 inches of clearance from walls to allow for proper ventilation.
3. Bersih: Wipe down the exterior of the dispenser and the drip tray with a soft, damp kain.
4. Install Drip Tray: Slide the drip tray into its designated slot below the spouts.
5. Load Water Bottle: Remove the cap from a 3 or 5-gallon water bottle. Carefully lift the bottle and place it onto the anti-dust mite water barrel seat on top of the dispenser. Ensure the bottle is seated firmly and water begins to flow into the dispenser's reservoirs.
6. Utamakan Sistem: Before plugging in, dispense water from both the hot and cold spouts until water flows continuously. This removes air from the system.
7. Pasangkan: Sambungkan kord kuasa ke salur keluar elektrik yang dibumikan.
8. Aktifkan Pemanasan/Penyejukan: Locate the hot and cold power switches on the back of the unit. Turn them ON. The indicator lights on the front will illuminate.

Image 4.1: Dispenser dimensions and a view of the anti-dust mite water barrel seat for bottle placement.

5. Arahan Operasi

Your VECYS water dispenser provides instant hot and cold water once properly set up and powered on.

5.1 Pemberian Air Panas

• Place a cup under the red (hot water) spout.
• To dispense hot water, simultaneously press the child safety lock button and push down the hot water lever.
• Release the lever to stop the flow.

5.2 Cold Water Dispensing

• Place a cup under the blue (cold water) spout.
• Push down the cold water lever to dispense cold water.
• Release the lever to stop the flow.

Image 5.1: Details on hot water (195℉-203℉, 4L capacity) and cold water (42℉-50℉, 2L capacity).

Image 5.2: Visual representation of temperature settings for hot and cold water.

6. Penyelenggaraan

Regular cleaning and maintenance will ensure the longevity and optimal performance of your water dispenser.

6.1 Membersihkan Bahagian Luar

• Cabut plag dispenser daripada salur keluar kuasa.
• Lap permukaan luar dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
• Clean the drip tray and grill regularly. Remove the drip tray, empty any collected water, wash with mild soap and water, rinse thoroughly, and dry before reinserting.

6.2 Cleaning the Water Reservoirs (Descaling)

It is recommended to clean the internal reservoirs every 3-6 months to prevent mineral buildup.

• Cabut plag dispenser dan keluarkan botol air.
• Drain all water from both hot and cold spouts.
• Sediakan larutan pembersih (contohnya, campuran air dan asid sitrik gred makanan atau cuka putih).
• Pour the cleaning solution into the top reservoir.
• Allow the solution to sit for 15-30 minutes.
• Drain the solution completely from both spouts.
• Rinse the reservoirs thoroughly by filling with clean water and draining several times until no cleaning solution odor remains.
• Reinstall a fresh water bottle and plug in the dispenser.

Image 6.1: Illustration of the internal food-grade 304 stainless steel hot and cold water tanks, designed for water purity.

7. Penyelesaian masalah

Rujuk jadual di bawah untuk isu biasa dan penyelesaiannya.

8. Spesifikasi

Technical details for the VECYS Hot and Cold Water Cooler Dispenser Model BY557:

Image 8.1: Illustration of the built-in refrigerating compressor, emphasizing fast cooling, low noise, and low energy consumption.

9. Waranti dan Sokongan

Your VECYS water cooler dispenser is backed by a Waranti 1 tahun dari tarikh pembelian. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa.

For warranty claims, technical assistance, or any questions regarding your product, please contact VECYS customer service. Our after-sale service and technical team are available to respond to your inquiries.

Please have your model number (BY557) and purchase information ready when contacting support.