1. Pengenalan
This manual provides detailed instructions for the installation, operation, and maintenance of your Bixolon SRP-330III thermal printer. This model features Serial, Ethernet, and USB connectivity, making it suitable for various point-of-sale and receipt printing applications.
1.1 Kandungan Pakej
Setelah membuka bungkusan, sila sahkan bahawa semua barang ada:
- Bixolon SRP-330III Thermal Printer
- Manual Pengguna (dokumen ini)
- Kabel Kuasa
- Interface Cable (may vary based on specific model variant, e.g., USB, Serial, or Ethernet)
2. Maklumat Keselamatan
Please read the following safety precautions carefully before using the printer to ensure safe and optimal performance.
- Jangan dedahkan pencetak kepada air atau kelembapan.
- Use only the power adapter and cables supplied with the printer.
- Pastikan pencetak diletakkan di atas permukaan yang stabil dan rata.
- Elakkan menyekat bukaan pengudaraan.
- Jangan cuba membuka atau membaiki pencetak sendiri. Rujuk kepada kakitangan servis yang berkelayakan.
- Jauhkan daripada kanak-kanak.
3. Persediaan
3.1 Membongkar dan Meletakkan
Carefully remove the printer from its packaging. Place the printer in a location with adequate ventilation and away from direct sunlight or heat sources.
Rajah 1: Bixolon SRP-330III Thermal Printer. This image shows the black Bixolon SRP-330III thermal printer, viewed from the front-right angle. The printer features a sleek, compact design with a paper output slot at the front and control buttons on the right side of the top panel. The Bixolon logo is visible on the top cover, and an Energy Star label is on the lower left front.
3.2 Menyambung Kabel
Connect the necessary cables to the printer and your host system.
- Sambungan Kuasa: Connect the power cable to the printer's power port and then to a grounded electrical outlet.
- Sambungan Antara Muka:
- USB: Sambungkan kabel USB dari port USB pencetak ke port USB yang tersedia pada komputer anda.
- Ethernet: Connect an Ethernet cable from the printer's LAN port to your network router or switch.
- bersiri: Connect a Serial cable from the printer's Serial port to the Serial port on your computer or POS system.
3.3 Memuatkan Kertas Terma
The SRP-330III uses thermal paper rolls. Follow these steps to load a new roll:
- Open the printer cover by pushing the cover open lever (typically located on the top right side of the printer).
- Insert the new thermal paper roll into the paper compartment, ensuring the paper feeds from the bottom of the roll towards the front of the printer.
- Tarik sedikit kertas keluar melepasi pemotong.
- Tutup penutup pencetak dengan kuat sehingga ia berbunyi klik pada tempatnya.
4. Arahan Operasi
4.1 Menghidupkan/Mematikan
To power on the printer, ensure the power cable is connected and press the power switch (usually located at the rear or side of the printer). To power off, press the power switch again.
4.2 Percetakan Asas
Once the printer is connected and drivers are installed on your host system, you can initiate print jobs from your application. The printer will automatically feed and cut the thermal paper.
4.3 Petunjuk Status
The printer features LED indicators on its control panel to display its current status:
- LED kuasa: Menunjukkan pencetak dihidupkan.
- LED ralat: Illuminates or flashes to indicate an error condition (e.g., paper out, cover open, cutter error).
- Paper Out LED: Indicates that the printer is out of paper or the paper roll is low.
Refer to the troubleshooting section for resolving common error indications.
5. Penyelenggaraan
5.1 Membersihkan Pencetak
Regular cleaning helps maintain printer performance and extends its lifespan.
- Kepala Cetak: Gently wipe the thermal print head with a soft, lint-free cloth dampdicairkan dengan alkohol isopropil. Pastikan pencetak dimatikan dan disejukkan sebelum membersihkan.
- Penggelek Platen: Clean the platen roller with a soft cloth dampditambah dengan isopropil alkohol.
- Luaran: Lap bahagian luar casindengan kain lembut dan kering. Jangan gunakan pembersih yang kasar.
Perform cleaning periodically, especially if print quality degrades.
5.2 Penggantian Gulungan Kertas
When the paper out indicator illuminates or print quality diminishes due to the end of the roll, replace the paper roll as described in Section 3.3.
6. Penyelesaian masalah
This section addresses common issues you might encounter with your Bixolon SRP-330III printer.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pencetak tidak dihidupkan. | Kabel kuasa tidak disambungkan; salur keluar kuasa rosak. | Periksa sambungan kabel kuasa; cuba outlet lain. |
| No printing occurs. | Paper out; printer cover open; interface cable loose; driver issue. | Load paper; close cover; check cable connections; reinstall printer drivers. |
| Kertas jem. | Improper paper loading; foreign object. | Open cover, carefully remove jammed paper, reload correctly. |
| Kualiti cetakan buruk. | Dirty print head; low quality paper; incorrect settings. | Clean print head; use recommended thermal paper; check printer settings. |
7. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nama Model | SRP-330III |
| Teknologi Percetakan | Percetakan Talian Termal |
| Teknologi Ketersambungan | Ethernet, USB, Serial |
| Resolusi Cetakan Hitam dan Putih Maksimum | 203 dpi |
| Monokrom Kelajuan Cetakan Maks | 30 ppm |
| Output Pencetak | Monokrom |
| Dimensi Produk | 7.87"D x 9.84"W x 7.87"H (20 x 25 x 20 cm) |
| Berat Barang | 5.46 paun (2.48 kg) |
| Saiz Media Maksimum | 8.5 x 14 inch (A4 Centimeters) |
| Kapasiti Helaian Input Maks | 150 |
| Wattage | 50 watt |
| Ciri Khas | Rangkaian-Sedia |
| Komponen yang Disertakan | User manual, power cable, interface cable |
| Nombor Model Item | 8809794035135 |
8. Maklumat Waranti
The Bixolon SRP-330III thermal printer comes with a jaminan pengilang dua tahun against manufacturing defects. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please refer to the official Bixolon webtapak atau hubungi sokongan pelanggan.
9. Sokongan Pelanggan
If you encounter issues not covered in this manual or require further assistance, please contact Bixolon customer support. Visit the official Bixolon website for contact information, driver downloads, and additional resources.
Bixolon Official Webtapak: www.bixolon.com
