pengenalan
This manual provides detailed instructions for the installation, operation, and maintenance of your PERLESMITH TV Mounts, including the PSLTK1 Tilt TV Mount and the PSXLF03 Full Motion TV Wall Mount. These mounts are designed to securely hold your television, offering various viewing adjustments to enhance your entertainment experience.
Please read this manual thoroughly before installation to ensure proper setup and safe operation. Keep this manual for future reference.
Gambar 1: Lebihview of PERLESMITH PSLTK1 Tilt TV Mount (top) and PSXLF03 Full Motion TV Wall Mount (bottom) components.
Panduan Pemasangan
Langkah Keselamatan Am
- Ensure you have all necessary tools and hardware before beginning installation.
- Verify the wall structure can support the combined weight of the mount and your TV.
- Always use a stud finder to locate wood studs accurately if mounting to wood.
- For concrete or brick walls, use appropriate anchors (not always included, may need to be purchased separately).
- Jika tidak pasti tentang mana-mana bahagian pemasangan, rujuk profesional yang berkelayakan.
Keserasian Gunung
Both mounts are designed for specific TV sizes and VESA patterns. Please check your TV's VESA pattern before proceeding.
- PSLTK1 Tilt TV Mount:
- Fits most 37”-82” TVs up to 132 lbs (60 kg).
- VESA mounting patterns: 200x100mm to 600x400mm.
- Compatible with 16”/18”/24” wood studs, concrete, or brick walls.
- PSXLF03 Full Motion TV Wall Mount:
- Fits most 37”-75” flat/curved panel TVs up to 110 lbs.
- VESA mounting patterns: 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x300mm, 400x400mm, 500x400mm, 600x400mm.
- Compatible with wood studs (max 16” spacing), concrete, or brick walls.
Figure 2: PSLTK1 Tilt TV Mount Compatibility Details.
Figure 3: PSXLF03 Full Motion TV Wall Mount Compatibility Details.
Langkah Pemasangan (Umum)
- Sediakan Dinding: Locate and mark the desired mounting position. Use a stud finder to identify wood studs if applicable. For concrete/brick, mark drill points.
- Pasang Plat Dinding: Secure the wall plate to the wall using appropriate lag bolts and anchors. Ensure the wall plate is level using a spirit level.
- Lampirkan Kurungan TV: Attach the vertical TV brackets to the back of your television using the correct screws and spacers for your TV's VESA pattern.
- Gantungkan TV pada Plat Dinding: Carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV is securely seated.
- Secure TV to Mount: For the PSLTK1, use the pull straps to easily lock or unlock the TV from the wall plate. For the PSXLF03, ensure all safety screws are tightened.
Figure 4: PSLTK1 Easy Lock/Unlock Mechanism.
Mengendalikan Pemasangan TV Anda
PSLTK1 Tilt TV Mount Operation
- Condong: The PSLTK1 allows for a 7-degree downward tilt. Gently push the bottom of your TV forward to achieve the desired tilt angle to minimize glare.
- pemusatan: You can shift your TV left or right on the wall plate for perfect centering after installation.
- Pro Rendahfile: This mount holds your TV a mere 1.2” away from the wall for a sleek appearance.
Figure 5: PSLTK1 Low Profile Reka bentuk.
PSXLF03 Full Motion TV Wall Mount Operation
- Extension & Retraction: The mount arm can extend up to 27.36” from the wall and retract to as close as 3”. Gently pull or push the TV to adjust the distance.
- Pusing: When fully extended, the TV can swivel up to ±90 degrees left or right to direct the screen toward your viewkedudukan.
- Condong: The mount offers a tilt range of +5° to -15° to reduce glare and optimize viewsudut-sudut.
- Penarafan Selepas Pemasangan: Fine-tune the TV's level by adjusting the post-installation leveling screws, allowing for ±3° rotation.
- Pemasangan Sudut: The full motion capability makes this mount suitable for corner installations, providing flexible viewdari pelbagai sudut.
Figure 6: PSXLF03 Full Swivel Range.
Figure 7: PSXLF03 Extension, Retraction, Tilt, and Leveling Capabilities.
Figure 8: PSXLF03 Corner Installation Solution.
Penyelenggaraan
To ensure the longevity and safe operation of your PERLESMITH TV Mount, follow these maintenance guidelines:
- Pemeriksaan Berkala: Periodically check all screws and bolts to ensure they are tight and secure. Over time, vibrations or adjustments can cause them to loosen.
- Pembersihan: Dust the mount regularly with a soft, dry cloth. For stubborn marks, a slightly damp Kain boleh digunakan, tetapi elakkan bahan kimia yang keras atau pembersih yang kasar.
- Pemeriksaan Pergerakan: Test the tilt, swivel, and extension mechanisms (for PSXLF03) occasionally to ensure smooth operation. If any movement feels stiff, check for obstructions or consult the troubleshooting section.
- Had Berat: Never exceed the maximum weight capacity specified for each mount.
Menyelesaikan masalah
If you encounter issues with your PERLESMITH TV Mount, refer to the following common problems and solutions:
- TV tidak tahap:
- For PSLTK1, ensure the wall plate was installed level. Minor adjustments can sometimes be made by slightly loosening and re-tightening the TV brackets.
- For PSXLF03, use the post-installation leveling feature (refer to Operating section) to adjust the TV's horizontal alignment.
- Mount feels loose or unstable:
- Immediately remove the TV from the mount.
- Check all wall plate mounting bolts and TV bracket screws for tightness.
- Verify that the wall structure is sound and that appropriate anchors/studs were used.
- Ensure the TV's weight does not exceed the mount's capacity.
- Movement (tilt, swivel, extension) is stiff:
- Check for any cables or obstructions hindering movement.
- Ensure all adjustment knobs or screws are not overtightened.
- The mount mechanisms are designed to be firm to hold the TV's position; apply gentle, steady force.
- Bahagian yang hilang:
- Review the parts list in your original packaging.
- Contact PERLESMITH customer support for assistance.
Spesifikasi
| Ciri | PSLTK1 Tilt TV Mount | PSXLF03 Full Motion TV Wall Mount |
|---|---|---|
| Saiz TV yang Serasi | 37”-82” | 37”-75” |
| Kapasiti Beban Maks | 132 paun (60 kg) | 110 paun |
| Keserasian VESA | 200x100mm hingga 600x400mm | 200x100mm hingga 600x400mm |
| Keserasian Dinding | 16”/18”/24” Wood Studs, Concrete, Brick | Max 16” Wood Studs, Concrete, Brick |
| Sudut Kecondongan | 7° Downward | +5° hingga -15° |
| Sudut Pusing | T/A | ±90° (when fully extended) |
| Sambungan daripada Wall | 1.2” (Low Profile) | 3” (retracted) to 27.36” (extended) |
| Meratakan Selepas Pemasangan | T/A | ±3° |
Waranti dan Sokongan
PERLESMITH products are designed for durability and performance. For specific warranty information regarding your TV mount, please refer to the documentation included with your purchase or visit the official PERLESMITH webtapak.
For technical support, missing parts, or any questions regarding your PERLESMITH TV Mount, please contact PERLESMITH customer service. You can often find contact information on the brand's official webtapak atau melalui peruncit tempat anda membeli produk tersebut.
Official PERLESMITH Store: PERLESMITH Amazon Store
