DD Audio 812F-D2 12-inch Dual 2-Ohm 7500W Subwoofer Instruction Manual

1. Pengenalan

This manual provides essential information for the proper installation, operation, and maintenance of your DD Audio 812F-D2 12-inch Dual 2-Ohm 7500W Subwoofer. Please read this manual thoroughly before attempting installation or operation to ensure optimal performance and product longevity. Retain this manual for future reference.

Imej 1.1: Depan view of the DD Audio 812F-D2 Subwoofer. This image displays the speaker cone, surround, and the DD Audio logo.

2. Ciri-ciri Utama

The DD Audio 812F-D2 subwoofer incorporates advanced design elements for enhanced performance and durability:

• Thermal Cooling Enhancements: Features a vented aluminum voice coil insert and a vented, finned aluminum heatsink designed to efficiently dissipate heat from critical components, supporting extended periods of high-output operation.
• Optimized Excursion: Equipped with a taller surround, double-stitched to a fiberglass-loaded, non-pressed cone. This, combined with a voice coil featuring increased winding length and a double-layer spider, provides increased Xmax for greater linear excursion.
• Penukaran Kuasa yang Cekap: Engineered to maximize total efficiency, converting raw power into clean sound while effectively managing heat generated during operation.
• Pembinaan Teguh: The motor assembly is encased in a rubber boot with an embossed design, contributing to both protection and aesthetic appeal.

Imej 2.1: Bersudut view of the DD Audio 812F-D2 Subwoofer, highlighting the robust surround and cone structure.

3. Persediaan dan Pemasangan

Proper installation is crucial for the performance and longevity of your subwoofer. If you are unsure about any step, consult a professional installer.

3.1 Langkah Keselamatan

• Putuskan sambungan bateri kenderaan sebelum memulakan sebarang kerja elektrik.
• Pakai peralatan keselamatan yang sesuai, termasuk perlindungan mata.
• Pastikan semua pendawaian ditebat dan dipasang dengan betul untuk mengelakkan litar pintas dan kerosakan.
• Do not mount the subwoofer in a location that obstructs vehicle operation or safety features.

3.2 Keperluan Lampiran

The 812F-D2 subwoofer is designed for optimal performance in a ported enclosure. Refer to the specifications section for recommended enclosure volumes.

• Ported Enclosure Volume: 1.75 - 3.0 cubic feet.
• Ensure the enclosure is constructed from sturdy material and properly sealed to prevent air leaks.

3.3 Sambungan Pendawaian

The 812F-D2 features a Dual 2-Ohm voice coil configuration. Proper wiring is essential for matching the subwoofer to your ampkeperluan impedans liifier.

• Pendawaian Selari (Beban 1 Ohm): Connect the positive terminals of both voice coils together, and the negative terminals of both voice coils together. Connect the amplifier's positive output to the combined positive terminal and the amplifier's negative output to the combined negative terminal.
• Pendawaian Siri (Beban 4 Ohm): Connect the positive terminal of one voice coil to the negative terminal of the other voice coil. Connect the amplifier's positive output to the remaining positive terminal and the amplifier's negative output to the remaining negative terminal.
• Always use appropriate gauge wiring for power, ground, and speaker connections to prevent power loss and overheating.

Imej 3.1: Belakang view of the DD Audio 812F-D2 Subwoofer, illustrating the voice coil wiring and terminal connections.

4. Operasi

Once installed, follow these guidelines for optimal performance and to prevent damage.

4.1 Initial Power-Up and Break-In

• After installation, double-check all wiring connections before applying power.
• Mulakan dengan amplifier gain set to its minimum. Gradually increase the volume and adjust amplifier settings (gain, crossover, bass boost) to achieve desired sound without distortion.
• Allow a break-in period of approximately 20-30 hours of normal listening at moderate volumes. This allows the suspension components to loosen and reach their optimal compliance.

4.2 Amplifier Matching and Settings

• Pastikan anda amplifier's RMS power output matches the subwoofer's RMS power handling (2500 Watts). Using an underpowered or overpowered ampliifier boleh menyebabkan kerosakan.
• Tetapkan penapis laluan rendah (LPF) pada anda amplifier or head unit to prevent high frequencies from reaching the subwoofer. A common range is 60-80 Hz.
• Avoid excessive bass boost, as this can cause clipping and damage the subwoofer.

5. Penyelenggaraan

The DD Audio 812F-D2 subwoofer requires minimal maintenance to ensure long-term performance.

• Pembersihan: Periodically wipe the subwoofer cone and surround with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or excessive moisture.
• Pemeriksaan: Regularly inspect the speaker terminals and wiring for secure connections and signs of corrosion or damage.
• Faktor Persekitaran: Lindungi subwufer daripada suhu yang melampau, cahaya matahari langsung dan kelembapan.

6. Penyelesaian masalah

Jika anda mengalami masalah dengan subwufer anda, rujuk kepada masalah dan penyelesaian biasa berikut:

Imej 6.1: Bawah view of the DD Audio 812F-D2 Subwoofer's motor assembly, showing the heatsink and rubber boot.

7. Spesifikasi

Detailed technical specifications for the DD Audio 812F-D2 Subwoofer:

8. Waranti dan Sokongan

The DD Audio 812F-D2 Subwoofer comes with a Limited Warranty. For specific terms and conditions, please refer to the warranty card included with your product or visit the official DD Audio webtapak.

For technical support, service, or warranty claims, please contact DD Audio customer service directly. Ensure you have your product model number (812F-D2) and proof of purchase available when contacting support.

Pengeluar: Audio DD

Nombor Model: 812F-D2

Tarikh Mula-mula Tersedia: 30 Januari 2024