Kasa Smart Ceiling Fan Control & Dimmer Switch KS240 User Manual

1. Pengenalan

This manual provides detailed instructions for the installation, setup, and operation of your Kasa Smart Ceiling Fan Control & Dimmer Switch (KS240). This device allows you to control your ceiling fan's speed and light brightness from the switch, the Kasa Smart app, or via voice commands with compatible smart home platforms.

2. Maklumat Keselamatan

WARNING: RISK OF ELECTRIC SHOCK. Always turn off power at the circuit breaker before installation. Improper installation can lead to serious injury or death.

• Pastikan kuasa pada pemutus litar MATI sebelum memulakan pemasangan.
• Install in a standard indoor wall box only.
• A neutral wire is required for operation.
• Do not exceed the maximum load ratings: LED 150W, Halogen/Incandescent 300W, AC Motor Fan 1.5A (less than 60W).
• Consult a qualified electrician if you are unsure about wiring or electrical procedures.

3. Kandungan Pakej

• 1 x Kasa Smart Ceiling Fan Control & Dimmer Switch (KS240)
• 1 x Plat Dinding
• Kacang Kawat
• Skru
• Panduan Pemasangan Pantas

4. Produk Lebihview

The Kasa Smart KS240 switch integrates both fan speed control and light dimming into a single wall-mounted unit. It features intuitive touch controls and smart functionality.

Figure 4.1: Kasa Smart KS240 Switch Components

Ciri-ciri Utama:

• 4 Kelajuan Kipas: Adjust airflow to your preference.
• Kecerahan boleh laras: Malapkan lampu dari 1% hingga 100%.
• Kawalan Suara: Compatible with Apple HomeKit, Amazon Alexa, and Google Assistant.
• Kawalan Apl: Manage fan and light settings remotely via the Kasa Smart app.
• Penjadualan & Pemasa: Automate fan and light operation.
• Diperakui ETL: Memastikan piawaian keselamatan dan kualiti.

Figure 4.2: Kasa Smart KS240 Key Features

5. Keperluan Keserasian

Before installation, ensure your existing setup meets the following requirements:

Figure 5.1: Kasa Smart KS240 Compatibility

• Separate Load Wires: Your ceiling fan and light must have separate load wires for independent control.
• Kawat Neutral: A neutral wire (typically white) is required in your wall box.
• Rangkaian Wi-Fi: A 2.4GHz Wi-Fi network is necessary for smart functionality.
• Jenis Kipas: Compatible with AC motor speed control fans (1.5A, less than 60W).
• Jenis Cahaya: Supports LED (150W Max) and Halogen/Incandescent (300W Max) bulbs.
• tidak serasi: Not compatible with exhaust fans, DC motor fans, or ceiling fans with integrated remote control/Bluetooth/Wi-Fi speed controls.

6. Panduan Pemasangan

Before proceeding, ensure power is OFF at the circuit breaker to avoid electric shock.

1. Matikan Kuasa: Cari pemutus litar anda dan matikan kuasa pada suis yang anda gantikan. Sahkan kuasa dimatikan menggunakan voltantage penguji.
2. Keluarkan Suis Lama: Unscrew and carefully remove the existing wall plate and switch from the wall box.
3. Kenal pasti wayar: Label each wire connected to your old switch. Common wires include Line (hot), Load (to fan/light), Neutral, and Ground. The Kasa app provides an app-guided installation to assist with wire identification.
4. Connect Kasa Smart Switch: Connect the wires from your wall box to the corresponding wires on the Kasa Smart Switch using the provided wire nuts. Refer to the wiring diagram below. Ensure all connections are secure.
   

   Figure 6.1: Kasa Smart KS240 Wiring Diagram

5. Suis Pemasangan: Carefully fold the wires and push the switch into the wall box. Secure the switch with screws.
6. Pasang Plat Dinding: Snap on the new wall plate.
7. Pulihkan Kuasa: Turn the power back on at the circuit breaker. The switch's LED indicator should begin flashing, indicating it's ready for setup.

7. App Setup & Smart Home Integration

After physical installation, configure your KS240 switch using the Kasa Smart app.

1. Download Kasa Smart App: Download the Kasa Smart app from the Apple App Store or Google Play Store.
2. Create Kasa Account: Open the app and create a Kasa account or log in if you already have one.
3. Tambah Peranti: Tap the '+' icon in the app, select 'Device', then 'Smart Switches', and choose 'Smart Fan Control & Dimmer Switch (KS240)'. Follow the on-screen instructions to connect the switch to your 2.4GHz Wi-Fi network.
4. Integrasi Rumah Pintar:
   • Apple HomeKit: Once set up in the Kasa app, you can add the KS240 to Apple HomeKit. Open the Apple Home app, tap '+', and scan the HomeKit code on your device or packaging. For troubleshooting, visit TP-Link HomeKit Support.
   • Amazon Alexa/Google Assistant: Link your Kasa account within the Alexa or Google Home app to enable voice control.

Figure 7.1: Apple HomeKit Integration

8. Arahan Operasi

8.1 Kawalan Manual

• Kawalan Kelajuan Kipas: Slide the left control bar up or down to adjust the fan speed (4 levels). Press the fan button below the bar to turn the fan On/Off.
• Light Dimmer Control: Slide the right control bar up or down to adjust the light brightness (1% to 100%). Press the light button below the bar to turn the light On/Off.

8.2 Kawalan Apl

Use the Kasa Smart app to control your fan and light from anywhere:

• Adjust fan speed and light brightness.
• Tetapkan jadual dan pemasa untuk operasi automatik.
• Enable 'Away Mode' to randomly turn lights on/off for security.
• Configure 'Sleep Mode' for gradual dimming or fan speed reduction.

8.3 Kawalan Suara

Control your fan and light using voice commands with Apple HomeKit (Siri), Amazon Alexa, or Google Assistant:

Rajah 8.1: Kawalan Suara Example

• "Hei Siri, hidupkan kipas."
• "Alexa, set the fan to speed 3."
• "Hey Google, dim the light to 50%."

9. Penyelenggaraan

• Clean the switch with a soft, dry cloth. Do not use liquid cleaners.
• Ensure the wall plate is securely fastened to prevent dust and debris from entering the switch mechanism.
• Regularly check for firmware updates via the Kasa Smart app to ensure optimal performance and security.

10. Penyelesaian masalah

10.1 Switch Not Responding / LED Flashing Red

• Semak Kuasa: Ensure the circuit breaker is on and the switch is receiving power.
• Sambungan Wi-Fi: Verify your 2.4GHz Wi-Fi network is active and the switch is within range. Re-attempt setup in the Kasa app if necessary.
• Kawat Neutral: Confirm the neutral wire is correctly connected. This is essential for the switch to function.

10.2 Light Not Dimming Properly

• Keserasian Mentol: Ensure your LED bulbs are dimmable. Some LED bulbs may not dim effectively or may flicker.
• Had Muatan: Sahkan jumlah airtage of your lights does not exceed the 150W (LED) or 300W (Halogen/Incandescent) maximum.
• App Calibration: Use the Kasa Smart app to calibrate the minimum and maximum dimming levels for your specific bulbs.

10.3 Fan Not Responding / Incorrect Speed

• Jenis Kipas: Confirm your fan is an AC motor speed control fan and not an incompatible type (e.g., DC motor, integrated smart control).
• Fan Pull Chain: Ensure your ceiling fan's pull chain is set to its highest speed setting. The Kasa switch controls the speed from there.
• Had Muatan: Verify the fan's current draw does not exceed 1.5A (less than 60W).

10.4 Accidental Factory Reset

• The switch can be factory reset by holding either the fan or light button for 5 seconds. If this occurs accidentally, you will need to re-add the device to the Kasa Smart app.

11. Spesifikasi

12. Waranti dan Sokongan

For warranty information and technical support, please visit the official Kasa Smart (TP-Link) weblaman web atau hubungi khidmat pelanggan mereka. Anda boleh mendapatkan sumber sokongan, Soalan Lazim dan butiran hubungan di Sokongan TP-Link.