1. Pengenalan
This user manual provides essential information for the safe and efficient operation of your Anern 4200W Hybrid Solar Inverter. This all-in-one pure sine wave inverter integrates solar energy storage and charging, capable of producing stable AC sine waves. It features a 120A MPPT solar charge controller with optimized MPPT technology for up to 98% efficiency. Please read this manual thoroughly before installation and use.
Figure 1: Anern 4.2KW Hybrid Solar Inverter, showing the main unit and included Wi-Fi module.
2. Ciri-ciri Utama
- Reka Bentuk Semua-dalam-Satu: Integrates solar energy storage, charging, and AC output functions.
- High-Efficiency MPPT Controller: Features a 120A MPPT solar charge controller with up to 98% efficiency.
- Output Gelombang Sinus Tulen: Provides stable and high-quality AC power suitable for various household and office loads, including sensitive electronics.
- Pemantauan Jauh: Equipped with an LCD screen and 4 LED indicators for dynamic system data display. Supports Wi-Fi/GPRS remote monitoring (Wi-Fi module included).
- Mod Pengecasan Berbilang: Offers 4 optional charging modes: Solar, Solar & Utility, Solar First.
- Flexible Output Modes: Provides 3 output modes: Solar First, Utility First, SBU mode.
- Pengecas Bateri Pintar: Designed with an intelligent battery charger to optimize battery performance and extend battery life.
- Perlindungan Komprehensif: Includes protection against overcharge, overheating, short circuits, overcurrent, low voltage, dan lebihan beban.
- Keserasian Luas: Compatible with various battery types and generator power.
Figure 2: Illustration of the inverter's multiple protection features, including overcurrent, low voltage, short circuit, overheating, and overload protection.
Figure 3: The inverter supports Wi-Fi monitoring, allowing system operation to be controlled and viewed via a mobile phone (iOS/Android).
Figure 4: The inverter supports various battery types including GEL, AGM, FLD, and Lithium. Note: The inverter can be used without batteries. If using a lithium battery, ensure it is configured as "User-defined" in program 05. It can only connect to a BMS PACE, not BMS from other manufacturers. The inverter cannot communicate with other battery brands.
Figure 5: The inverter offers three charge modes (Solar Priority, Solar + Utility, Solar-Battery) and two output modes (Solar First, Utility First) to meet diverse user application requirements.
3. Persediaan dan Pemasangan
3.1 Langkah Keselamatan
- Ensure all connections are secure and correct before powering on the unit.
- Pemasangan hendaklah dilakukan oleh pegawai yang berkelayakan.
- Do not expose the inverter to rain, snow, spray, or any liquids.
- Ensure adequate ventilation around the inverter to prevent overheating.
- Always disconnect all power sources (PV, battery, AC) before performing any maintenance or wiring.
3.2 Produk Selesaiview dan Sambungan
Familiarize yourself with the inverter's components and connection points.
Rajah 6: Produk tamatview showing the front and rear panels with labeled components:
- Paparan LCD
- Paparan status
- Penunjuk beban
- Petunjuk ralat
- Kekunci fungsi
- Suis Hidup/Mati
- Input AC
- Keluaran utama
- Keluaran kedua
- Input bateri
- Input PV
- Anti-dust kit
- RS-232 communication Connection / Wi-Fi connection
3.3 Gambarajah Pendawaian
The following diagrams illustrate the recommended wiring for the inverter with solar panels, batteries, and AC loads.
Figure 7: Detailed connection diagram for the hybrid solar inverter. This diagram shows connections for solar panels (PV input), battery bank (24V), AC input (230V), and AC output (230V) to household appliances. Recommended cable sizes and fuse ratings are indicated.
- Jenis Bateri: Lead-acid / Lithium 24V
- Recommended Cable & Terminal Size: 2 AWG / Cable: 25mm²
- Fius yang disyorkan: 150A
- Kuasa PV: 4200W
- Vol. Litar Terbuka PV Makstage: 500VDC
- MPPT Jldtage Julat: 90VDC~450VDC
- Permulaan Voltage (Initial Charging): 120VDC
- Recommended PV Cable: 10 AWG / 6mm² (It is recommended to connect solar modules in series.)
- Input AC: 230V AC
- Vol. Input AC Makstage: 300V AC
- Max AC Charging Current: 160A
- Recommended AC Input Cable: 10 AWG / 6mm²
- Recommended AC Input Breaker: 63A
- Kuasa Output AC: 4200W
- Keluaran AC Voltage: 220V / 230V
- Recommended AC Output Cable: 10 AWG / 6mm²
- Recommended AC Output Breaker: 63A
- NOTA: The output of the inverter is 230V. You can add a converter (not included) for 110V devices.
Figure 8: System diagram illustrating the integration of the Anern AN-SCI-ECO-4200 hybrid inverter with solar panels, external battery packs, utility grid/generator, and various home appliances. The diagram also shows the Wi-Fi monitoring capability via the PVguarder APP or Web antara muka.
4. Arahan Operasi
4.1 Menghidupkan/Mematikan
- To power on, ensure all connections are correct, then switch on the AC input breaker (if connected), followed by the battery breaker, and finally the inverter's ON/OFF switch.
- To power off, reverse the sequence: turn off the inverter's ON/OFF switch, then the battery breaker, and finally the AC input breaker.
4.2 Paparan LCD dan Kekunci Fungsi
The LCD display provides real-time operational data. Use the function keys (refer to Figure 6, item 5) to navigate through menus and adjust settings.
- Paparan LCD: Shows system parameters such as input voltage, keluaran voltage, status bateri, peratusan bebantage, dan kod ralat.
- Status Indicators (LEDs): Provide quick visual cues for operational status.
- Kekunci Fungsi: Used for menu navigation, setting adjustments, and confirming selections.
4.3 Operating Modes Configuration
The inverter supports various charging and output modes, configurable via the LCD display settings.
- Mod Caj:
- Keutamaan Suria: Solar power is prioritized for charging batteries and powering loads.
- Solar + Utility: Both solar and utility power are used for charging and powering loads.
- Solar-Battery: Solar power charges the battery, and the battery powers the loads.
- Mod Output:
- Solar First: Solar power is prioritized for loads.
- Utiliti Pertama: Utility power is prioritized for loads.
- Mod SBU (Utiliti-Bateri-Solar): Solar power is prioritized, then battery, then utility.
4.4 Wi-Fi Monitoring Setup
The included Wi-Fi module allows for remote monitoring and control. Refer to the separate Wi-Fi module manual for detailed setup instructions, including connecting to the PVguarder APP or Web antara muka.
5. Penyelenggaraan
- Pembersihan tetap: Keep the inverter clean and free from dust. Use a dry cloth to wipe the exterior. Ensure ventilation openings are not blocked.
- Pemeriksaan Sambungan: Periksa secara berkala semua sambungan elektrik untuk kesesakan dan tanda-tanda kakisan.
- Kesihatan Bateri: Pantau bateri voltage and performance regularly. Follow battery manufacturer's guidelines for maintenance.
- Keadaan Persekitaran: Ensure the inverter operates within its specified temperature and humidity ranges.
6. Penyelesaian masalah
This section provides solutions to common issues. For problems not listed here, please contact customer support.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Inverter tidak dapat dihidupkan. | Tiada sambungan bateri, volum bateri rendahtage, AC input not connected, or ON/OFF switch off. | Semak sambungan bateri dan voltage. Ensure AC input is connected and breakers are on. Turn on the inverter's ON/OFF switch. |
| Tiada output AC. | Overload, short circuit, low battery, or incorrect output mode setting. | Reduce load. Check for short circuits in wiring. Recharge battery. Verify output mode settings on LCD. |
| Pengecasan PV tidak berfungsi. | Insufficient solar input, PV connection error, or MPPT controller fault. | Check solar panel connections and ensure adequate sunlight. Verify PV input voltage pada LCD. |
| Inverter mengeluarkan bunyi yang luar biasa. | Normal fan operation under load, or potential internal fault. | Some fan noise is normal. If noise is excessive or unusual, power off the unit and contact support. |
7. Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Jenama | Anern |
| Nama Model | AN-SCI-ECO-4200W with WIFI |
| warna | Jingga |
| kuasa | 4.2 KW |
| Kapasiti Bateri | 120 Amp-hours (Charge Controller) |
| Sumber Kuasa | Solar dan Bateri Dikuasakan |
| Penggunaan yang Disyorkan | Rumah |
| Komponen yang Disertakan | Modul Wi-Fi |
| Dimensi Produk (L x W x H) | 52L x 45W x 21.5H cm (approx. 20.5L x 17.7W x 8.5H inches) |
| Jumlah Outlet Kuasa | 1 |
| Vol. Litar Terbuka PV Makstage | 450VDC |
| Kuasa PV Maks | 6200W |
| Max PV No-Load Voltage | 500VDC |
| Max PV Charging Current | 120A |
| Arus Keluaran Dinilai | 44.3A |
Figure 9: Product dimensions, showing height (420mm / 16.5"), width (350mm / 13.77"), and depth (110mm / 4.33").
8. Waranti dan Sokongan
Produk ini disertakan dengan a Waranti 1 Tahun Terhadap Kecacatan Pengilang. For any issues, technical support, or warranty claims, please contact the seller directly. Ensure you have your purchase details and product model number ready when contacting support.
Untuk bantuan lanjut, anda juga boleh melawati Anern Store on Amazon.
