Phanteks XT View Mid-Tower Gaming Chassis Instruction Manual

1. Pengenalan

The Phanteks XT View is a mid-tower gaming chassis designed to accommodate modern hardware with enhanced cooling capabilities and internal space. It features tempered glass on both the front and side panels, allowing for a clear view of internal components. The chassis supports the latest mainboards with hidden rear connectors for a clean build aesthetic.

Image 1.1: Phanteks XT View Chassis with internal components and D-RGB lighting.

Ciri-ciri Utama:

• Support for rear-side connector mainboards.
• Front and side tempered glass panels.
• Includes three M25-120mm D-RGB fans.
• Supports up to nine 120mm fan positions.
• Dedicated 360mm radiator support in the top panel.
• Accommodates large graphics cards.

2. Kandungan Pakej

Sahkan bahawa semua komponen terdapat dalam pakej:

• XT View Chassis (Black)
• Storage Bracket (1x)
• M25-120_DBK Fan (3x)
• D-RGB Controller (1x)
• Triple SSD Bracket (1x)
• Side D-RGB LED strip (1x)
• Accessory Box containing:
  • Ikatan zip (30x)
  • MB/SSD Screws (30x)
  • Skru Ibu Jari (4x)
  • HDD Screws (8x)
  • Standoff Tool (1x)
  • MB Standoff (1x)
  • PSU Screws (4x)
  • 30mm Fan Screws (12x, UNC6-32)

3. Persediaan dan Pemasangan

Follow these steps for proper assembly and installation of your PC components within the Phanteks XT View casis.

3.1. Menyediakan Casis

1. Bongkar: Tanggalkan casis daripada pembungkusannya dengan berhati-hati.
2. Alih Keluar Panel: Unscrew and remove the tempered glass side panels and any other removable panels to access the interior.

Imej 3.1: Dalaman view of the XT View chassis, ready for component installation.

3.2. Pemasangan Papan Induk

1. Pasang Kebuntuan: Ensure the correct standoffs are installed for your motherboard form factor (ATX, micro-ATX, mini-ITX, E-ATX). Use the included standoff tool if necessary.
2. Place Motherboard: Carefully align your motherboard with the standoffs and I/O shield opening.
3. Secure Motherboard: Use the provided MB screws to secure the motherboard to the chassis.

3.3. Pemasangan Unit Bekalan Kuasa (PSU).

1. Kedudukan PSU: Slide the PSU into its designated compartment at the bottom rear of the chassis.
2. PSU selamat: Fasten the PSU to the chassis using the provided PSU screws.

3.4. Pemasangan Pemacu Storan

The chassis supports 3.5" HDDs and 2.5" SSDs.

• 3.5" HDD: Install into the storage bracket. The chassis supports 2x 3.5" drives (or 1x if 2x SSDs are installed in the same bracket).
• 2.5" SSD: Install into the storage bracket or the triple SSD bracket. The chassis supports 2x 2.5" drives (or 0x if 2x HDDs are installed in the same bracket).

Secure drives with the appropriate screws.

3.5. Expansion Card (GPU) Installation

1. Tanggalkan Penutup Slot: Tanggalkan penutup slot pengembangan yang diperlukan dari bahagian belakang casis.
2. Masukkan Kad: Carefully insert your graphics card or other expansion cards into the PCIe slots on the motherboard.
3. Kad Selamat: Fasten the expansion card with screws. Vertical GPU support is available with an optional bracket (PH-VGPUKT4.0_03R/PH-PGPUKT_01).

Imej 3.2: Bahagian dalam belakang view highlighting expansion slots and fan mounting points.

3.6. Pemasangan Kipas dan Radiator

The chassis supports various fan and radiator configurations:

• 120mm Fan Locations: Right Side (2x), Top (3x), Rear (1x), Midplate (3x).
• 140mm Fan Locations: Top (2x), Rear (1x).
• Liquid Cooling Radiator Support:
  • Side: Up to 240mm (with Vertical GPU only).
  • Top: Up to 360mm.
  • Rear: Up to 120mm.

Install the included M25-120 D-RGB fans in your preferred locations. Ensure proper airflow direction for optimal cooling.

3.7. Pengurusan Kabel

Gunakan saluran penghalaan kabel dan titik pengikat di belakang dulang papan induk untuk menyusun kabel. Ini meningkatkan aliran udara dan estetika.

Imej 3.3: Belakang view illustrating cable management space.

3.8. Sambungan I/O Hadapan

Connect the front I/O cables from the chassis to the corresponding headers on your motherboard:

• Pengepala USB 3.0
• USB-C 3.2 Gen2 Type-E header
• HD-Audio header
• Power switch, Reset button, D-RGB color button, D-RGB mode button headers
• D-RGB expansion header (for additional D-RGB devices)

4. Arahan Operasi

4.1. Hidupkan/Mati Kuasa

Tekan ke Butang Kuasa located on the top front panel to turn the system on or off.

4.2. Front Panel Connectivity

Panel I/O hadapan menyediakan akses mudah kepada:

• 1x port USB 3.0
• 1x USB-C 3.2 Gen2 port
• Microphone/Headphone Combo jack

Image 4.1: Front I/O panel on the top of the chassis.

4.3. D-RGB Control

The integrated D-RGB controller allows for customization of the included D-RGB fans and LED strip. Use the D-RGB color button to cycle through colors and the D-RGB mode button to change lighting effects. The D-RGB system can also be synchronized with compatible motherboards via the D-RGB Motherboard connector.

5. Penyelenggaraan

5.1. Pembersihan Penapis Habuk

Regularly clean the dust filters to maintain optimal airflow and cooling performance. Dust filters are typically located at the front, top, and bottom of the chassis.

1. Alih Keluar Penapis: Gently slide out or unclip the dust filters.
2. Bersih: Use compressed air or a soft brush to remove accumulated dust. For heavily soiled filters, wash with water and allow to dry completely before reinstallation.
3. Pasang semula: Place the clean, dry filters back into their positions.

5.2. Pembersihan Am

For external surfaces, use a soft, damp cloth to wipe down the chassis. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass.

6. Penyelesaian masalah

Bahagian ini menangani isu biasa yang mungkin anda hadapi.

6.1. System Does Not Power On

• Sambungan Kuasa: Verify that the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
• Sambungan Papan Induk: Ensure all power cables from the PSU are securely connected to the motherboard (24-pin ATX, 8-pin CPU).
• Front Panel Header: Check that the power button cable from the front I/O is correctly connected to the motherboard's front panel header.

6.2. D-RGB Lighting Not Functioning

• D-RGB Controller Connection: Ensure the D-RGB controller is properly connected to the PSU and the D-RGB devices (fans, LED strip).
• Penyegerakan Papan Induk: If using motherboard D-RGB control, verify the D-RGB Motherboard cable is correctly connected and the motherboard's software is configured.
• Kefungsian Butang: Test the D-RGB color and mode buttons on the front panel.

6.3. Fan Noise or Malfunction

• Sambungan: Ensure fan cables are securely connected to the motherboard fan headers or a fan controller.
• Halangan: Check for any cables or objects obstructing fan blades.
• habuk: Clean any dust buildup on fan blades.

7. Spesifikasi

8. Sokongan dan Jaminan

For additional information, technical support, or warranty inquiries, please visit the official Phanteks webtapak:

www.phanteks.com

Refer to the Phanteks website for the most current warranty terms and conditions applicable to your region.