MONDAWE MO-DT95028NS Bar Sink Faucet Instruction Manual

pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your MONDAWE MO-DT95028NS Bar Sink Faucet. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and care will ensure optimal performance and longevity of your faucet.

Image: The MONDAWE MO-DT95028NS Bar Sink Faucet in brushed nickel finish, showcasing its single-handle design and curved spout.

Maklumat Keselamatan

• Sentiasa matikan bekalan air utama sebelum memulakan sebarang kerja pemasangan atau pembaikan.
• Pakai peralatan perlindungan diri yang sesuai, seperti cermin mata keselamatan dan sarung tangan.
• Jika anda tidak pasti tentang mana-mana bahagian proses pemasangan, berunding dengan tukang paip yang berkelayakan.
• Ensure all connections are tight to prevent leaks, but do not overtighten.
• Jauhkan bahagian kecil daripada kanak-kanak.

Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

Image: Diagram showing all included components: (1) Bathroom Faucet, (2) Stainless Steel Deck Plate, (3) 2 Water Supply Hoses, (4) Customized Packaging Box.

• 1 x MONDAWE Bar Sink Faucet (Brushed Nickel)
• 1 x Single Handle
• 1 x Deck Plate/Escutcheon (for 3-hole installation)
• 2 x Water Supply Hoses (Hot & Cold)
• Mounting Hardware (nuts, washers, O-rings, Allen wrench)
• Manual Arahan

Spesifikasi

Image: Detailed diagram illustrating the dimensions of the faucet, including spout height, spout reach, and mounting hole size (1.38 inches).

Persediaan dan Pemasangan

This faucet is designed for easy installation in either a 1-hole or 3-hole configuration. A deck plate is included for 3-hole installations.

Alat yang Anda Mungkin Perlukan (Tidak Termasuk):

• Sepana Boleh Laras
• Pemutar Skru Kepala Phillips
• Plumber's Putty atau Silicone Sealant
• Lampu suluh
• Baldi (untuk menangkap titisan)

Langkah Pemasangan:

1. Sediakan Sinki: Turn off the hot and cold water supply lines at the shut-off valves under the sink. Open the existing faucet to drain any remaining water. Disconnect and remove the old faucet if applicable. Clean the sink surface around the faucet holes.
2. Install Deck Plate (for 3-hole sinks): If your sink has three holes, place the included stainless steel deck plate over the holes. Ensure the gasket is properly seated underneath the deck plate to prevent water leakage.
3. Pasang Faucet: Insert the faucet body through the center hole (or the center hole of the deck plate). Ensure the faucet is oriented correctly. From underneath the sink, slide the rubber washer, metal washer, and mounting nut onto the threaded shank of the faucet. Hand-tighten the mounting nut.
4. Selamatkan Faucet: Use the provided Allen wrench to tighten the two screws on the mounting nut. This will secure the faucet firmly to the sink or countertop. Do not overtighten.
5. Sambung Talian Bekalan Air: Attach the hot and cold water supply hoses (included) to the corresponding inlets on the faucet body. The hoses are typically marked or color-coded (red for hot, blue for cold). Connect the other ends of the hoses to your hot and cold water supply valves. Use an adjustable wrench to tighten connections, ensuring a leak-free seal.
6. Ujian untuk Kebocoran: Slowly turn on the hot and cold water supply valves. Check all connections for leaks. If any leaks are detected, tighten the connections slightly until the leak stops.
7. Siram Faucet: Remove the aerator from the spout. Turn on the faucet and let the water run for a few minutes to flush out any debris from the water lines. Turn off the faucet, reattach the aerator, and test the water flow and temperature.

Image: The MONDAWE faucet installed in a sink, with water flowing from the spout, demonstrating its functionality.

Arahan Operasi

Your MONDAWE faucet features a single-handle design for convenient control of water flow and temperature.

• Kawalan Aliran Air: Angkat pemegang ke atas untuk meningkatkan aliran air. Tolak pemegang ke bawah untuk mengurangkan atau menutup aliran air.
• Kawalan Suhu: Move the handle to the left for hot water and to the right for cold water. Adjust the handle position between hot and cold to achieve your desired water temperature.
• Muncung Pusing 360°: The high-arc spout can rotate 360 degrees, providing flexibility for various sink tasks and making it suitable for both single and double sinks.

Image: The faucet demonstrating its 360-degree swivel capability, highlighting its versatility for various uses.

Penyelenggaraan

Pembersihan dan penyelenggaraan yang kerap akan membantu mengekalkan kemasan dan kefungsian paip anda.

• Membersihkan Kemasan: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the brushed nickel finish. Rinse thoroughly with water and dry with a soft cloth to prevent water spots.
• Membersihkan Aerator: If water flow becomes restricted or irregular, the aerator may be clogged. Unscrew the aerator from the tip of the spout. Rinse any debris from the screen under running water. For stubborn mineral deposits, soak the aerator in a solution of equal parts white vinegar and water. Reattach the aerator once clean. The faucet features easy-clean silicone nozzles for simplified maintenance.
• Pencegahan Kebocoran: The faucet is equipped with a robust ceramic valve core and an integrated rubber ring designed for lasting durability and drip resistance. If a leak occurs, check connections and ensure they are properly tightened.

Image: Close-up of the faucet's aerator, highlighting the easy-clean silicone nozzles and smooth water output.

Menyelesaikan masalah

Maklumat Waranti

The MONDAWE MO-DT95028NS Bar Sink Faucet comes with a Waranti Terhad 1 Tahun dari tarikh pembelian. Waranti ini meliputi kecacatan pembuatan bahan dan mutu kerja di bawah penggunaan biasa. Ia tidak meliputi kerosakan akibat pemasangan yang tidak betul, salah guna, penyalahgunaan, kemalangan atau haus dan lusuh biasa.

Sila simpan bukti pembelian anda untuk tuntutan waranti.

Sokongan Pelanggan

If you have any questions, require assistance with installation, or need to make a warranty claim, please contact MONDAWE customer support:

• Webtapak: Visit the MONDAWE Store on Amazon
• Rujuk maklumat hubungan yang diberikan dalam pembungkusan produk anda untuk saluran sokongan langsung.