Manual Pengguna Pengulang Rangkaian Tanpa Wayar Dwi-Jalur Rebel KOM1031

1. Pengenalan

This manual provides detailed instructions for the installation, configuration, and operation of your Rebel KOM1031 Dual-Band Wireless Network Repeater. This device is designed to extend the coverage of your existing Wi-Fi network, providing a stronger and more reliable signal in areas with weak or no coverage. It supports both 2.4 GHz and 5 GHz wireless bands, offering flexible connectivity options and high data transfer rates.

2. Kandungan Pakej

Sila sahkan bahawa semua item terdapat dalam pakej anda:

• Rebel KOM1031 Wireless Network Repeater
• Manual Pengguna (dokumen ini)
• Ethernet Cable (may be included, check packaging)

Rajah 2.1: The Rebel KOM1031 Repeater packaging, showing the device and its key features.

3. Produk Lebihview

Familiarize yourself with the physical components and indicators of the Rebel KOM1031 Repeater.

3.1. Reka Letak Peranti

Rajah 3.1: Depan view of the Rebel KOM1031 Repeater, highlighting the LED indicators and Ethernet ports.

Rajah 3.2: sebelah view of the Rebel KOM1031 Repeater, showing the four external antennas in an extended position.

Rajah 3.3: Bawah view of the Rebel KOM1031 Repeater, illustrating the integrated power plug and two RJ45 Ethernet ports.

3.2. Petunjuk LED

4. Panduan Persediaan

Follow these steps to set up your Rebel KOM1031 Repeater.

4.1. Initial Placement and Power On

1. Pilih Lokasi: Plug the repeater into an electrical outlet in an area between your main router and the location where you need improved Wi-Fi coverage. Ensure it is within the range of your existing Wi-Fi signal.
2. Hidupkan kuasa: Plug the device directly into a standard wall socket. The SYS/POWER LED should illuminate. Wait approximately 30-60 seconds for the device to boot up.

Rajah 4.1: The Rebel KOM1031 Repeater plugged into a wall outlet, ready for configuration.

4.2. Connecting to the Repeater

3. Sambung Secara Tanpa Wayar: On your computer or mobile device, search for available Wi-Fi networks. Connect to the network named "Rebel_XXXX" or similar (check the label on the device for the default SSID). No password is required for the initial connection.
4. Akses Web Antara muka: Buka a web browser (e.g., Chrome, Firefox, Edge) and enter the default IP address or domain name (usually 192.168.10.1 or rebelrepeater.net) into the address bar. Press Enter.
5. log masuk: When prompted, enter the default username and password (usually admin untuk kedua-duanya).

4.3. Configuration Wizard (Repeater Mode)

Most users will configure the device in Repeater Mode to extend an existing Wi-Fi network.

6. Pilih Mod Pengulang: pada web interface, select "Repeater Mode" or "Wi-Fi Repeater" from the available options.
7. Imbas untuk Rangkaian: The device will scan for available Wi-Fi networks. Select your main Wi-Fi network (SSID) from the list.
8. Masukkan Kata Laluan: Enter the Wi-Fi password (security key) of your main router.
9. Configure Repeater SSID (Optional): You can choose to keep the same SSID as your main network or create a new one (e.g., "MyHome_EXT"). It is recommended to use a different SSID to easily distinguish between networks.
10. Gunakan Tetapan: Click "Apply" or "Save" to confirm your settings. The repeater will restart. This process may take a few minutes.
11. Sambung semula: After the repeater restarts, disconnect from the repeater's default Wi-Fi network and connect to your newly configured extended network (e.g., "MyHome_EXT") using the password you entered.

Your Rebel KOM1031 Repeater should now be extending your Wi-Fi network. Check the signal strength in previously weak areas.

5. Mod Operasi

The Rebel KOM1031 supports multiple operating modes to suit various networking needs.

5.1. Mod Pengulang (Lalai)

In Repeater Mode, the device extends the coverage of an existing wireless network. It receives the wireless signal from your main router and re-transmits it, effectively expanding the Wi-Fi range. This is the most common mode for eliminating Wi-Fi dead zones.

5.2. Mod Titik Akses (AP)

In AP Mode, the device connects to a wired network (via an Ethernet cable) and broadcasts a new wireless network. This is useful for adding Wi-Fi capability to a wired-only network or creating a new Wi-Fi hotspot from a wired internet connection.

1. Sambungkan Ethernet: Connect an Ethernet cable from your router or modem to one of the RJ45 ports on the KOM1031.
2. Akses Web Antara muka: Follow steps 4.2 to access the web antara muka.
3. Pilih Mod AP: Choose "AP Mode" or "Access Point" from the configuration options.
4. Konfigurasikan Tetapan Wi-Fi: Tetapkan SSID (nama rangkaian) baharu dan kata laluan yang kukuh untuk rangkaian wayarles baharu anda.
5. Gunakan Tetapan: Save the configuration. The device will restart and operate as an Access Point.

6. Penyelenggaraan

Penyelenggaraan yang betul memastikan jangka hayat dan prestasi optimum peranti anda.

• Pembersihan: Gunakan kain lembut dan kering untuk membersihkan peranti. Jangan gunakan pembersih cecair atau aerosol.
• Pengudaraan: Ensure the device is placed in a well-ventilated area. Do not block the ventilation slots.
• Kemas kini Firmware: Periksa pengeluar secara berkala website for firmware updates. Updating firmware can improve performance and security.
• Menetapkan semula: If the device malfunctions or you forget the login credentials, you can perform a factory reset. Locate the reset button (usually a small pinhole) and press it with a paperclip for 5-10 seconds while the device is powered on. The device will revert to factory default settings.

7. Penyelesaian masalah

Jika anda menghadapi masalah, rujuk masalah dan penyelesaian biasa berikut.

7.1. Tiada Akses Internet Selepas Persediaan

• Semak Penghala Utama: Pastikan penghala utama anda mempunyai sambungan internet yang aktif.
• Sahkan kata laluan: Double-check that you entered the correct Wi-Fi password for your main router during setup.
• Relocate Repeater: The repeater might be too far from your main router. Move it closer to ensure it receives a strong signal.
• Mulakan semula Peranti: Restart your main router, the repeater, and your client devices.

7.2. Tidak Boleh Diakses Web Halaman Pengurusan

• Semak Sambungan: Ensure your device is connected to the repeater's Wi-Fi network (either the default "Rebel_XXXX" or your configured extended network).
• Sahkan Alamat IP: Confirm you are using the correct IP address (e.g., 192.168.10.1) or domain name (rebelrepeater.net).
• Kosongkan Cache Pelayar: Cuba kosongkan web cache pelayar atau menggunakan pelayar lain.
• Tetapan semula kilang: If all else fails, perform a factory reset (see Section 6. Maintenance) and try setting up again.

7.3. Weak Signal or Slow Speed

• Peletakan Optimum: Ensure the repeater is placed optimally, roughly halfway between your router and the dead zone. Avoid physical obstructions like thick walls or metal objects.
• Gangguan: Peranti elektronik lain (ketuhar gelombang mikro, telefon tanpa wayar) boleh menyebabkan gangguan. Cuba alihkan pengulang jauh dari peranti sedemikian.
• Pelarasan Antena: Adjust the external antennas for better signal reception and transmission.

8. Spesifikasi Teknikal

9. Maklumat Keselamatan

Sila baca dan patuhi garis panduan keselamatan ini untuk mengelakkan kerosakan pada peranti atau kecederaan pada diri anda.

• Jangan dedahkan peranti kepada air, lembapan atau suhu yang melampau.
• Jangan cuba membuka atau membaiki peranti ini sendiri. Rujuk semua servis kepada kakitangan yang berkelayakan.
• Ensure the power outlet used is easily accessible and provides the correct voltage (110-240V).
• Elakkan meletakkan peranti berhampiran sumber haba atau di bawah cahaya matahari langsung.
• Jauhkan peranti daripada kanak-kanak dan haiwan peliharaan.

10. Waranti dan Sokongan

For warranty information, technical support, or further assistance, please refer to the official Rebel website or contact your retailer. Please have your product model number (KOM1031) and purchase details ready when seeking support.