pengenalan
Thank you for choosing the ErGear Dual Monitor Desk Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor mount. Please read this manual thoroughly before installation and keep it for future reference.
Maklumat Keselamatan Penting
Please ensure all instructions are read and understood before assembly and use. If you have any questions, please contact customer service. Failure to follow these instructions may result in property damage, serious injury, or death.
- Verify that your monitor's weight and VESA pattern are within the specified limits.
- Do not exceed the maximum load capacity of 26.5 lbs per arm.
- Ensure the mounting surface (desk) is strong enough to support the combined weight of the mount and monitors.
- Use only the provided hardware.
- Jauhkan bahagian kecil daripada kanak-kanak.
Spesifikasi
- model: EGCM13B
- Keserasian Saiz Skrin: 13 hingga 34 inci
- Weight Capacity (per arm): Sehingga 26.5 lbs
- Keserasian VESA: 75x75 mm, 100x100 mm
- Arm Span: 33 inci
- Tinggi tiang: 16.3 inci
- Jenis Pergerakan: Tilt, Swivel, Rotation, Articulating
- Sudut Kecondongan Maksimum: 90 Darjah
- Bahan: Keluli Aloi
- warna: Hitam
- Jenis Pemasangan: Pelekap Atas Meja (C-Clamp atau Grommet)
- C-Clamp Ketebalan Meja: 0.39" - 3.15"
- Grommet Mount Desk Thickness: 0.39" - 2.17"
- Diameter Lubang Grommet: 0.47" - 0.79"
Kandungan Pakej
Please check that all parts are included and undamaged. If any parts are missing or damaged, please contact customer service.
- Tiang Utama dengan Meja Clamp/Grommet Base
- Lengan Dwi Monitor
- Plat VESA (2x)
- Mounting Hardware (screws, washers, tools)
- Klip Pengurusan Kabel
- Manual Arahan
Persediaan dan Pemasangan
1. Desk Compatibility Check
Before installation, ensure your desk meets the following criteria:
- Bahan: Recommended for wooden tables.
- Bahagian bawah: Preferably free of beams or panels that may interfere with installation.
- C-Clamp Ketebalan: 0.39" - 3.15"
- Grommet Mount Thickness: 0.39" - 2.17" (Hole Diameter: 0.47" - 0.79")
2. Monitor Compatibility Check
Each monitor must meet these conditions:
- Saiz Skrin: 13 hingga 34 inci
- Berat: Sehingga 26.5 lbs
- Lubang Pemasangan VESA: 75x75 mm or 100x100 mm apart on the back of the monitor.
3. Assemble the Pole with Clamp Sokongan
Choose either C-Clamp or Grommet installation based on your desk type.
Follow the detailed steps in the provided video and diagrams to securely attach the main pole to your desk using either the C-Clamp or Grommet method. Ensure all screws are tightened appropriately for stability.
4. Assemble the Arm and Pole Wire Clips
Attach the monitor arms to the main pole. Loosen the screw on the pipe clamp before installing the arm, then tighten it securely. Ensure the VESA plate side of the arm faces upwards. Install the cable management clips along the arms and pole.
5. Assemble VESA Plate and Monitor
Attach the VESA plate to the back of your monitor using the appropriate screws and washers. Ensure it is securely fastened.
6. Install the Monitor to the Swivel Arm
Carefully slide the monitor (with the attached VESA plate) onto the swivel arm. Secure it by tightening the locking screw. Adjust the screw with the Allen key to adjust the height of the VESA panel as needed (clockwise to lower, counter-clockwise to raise).
Pengendalian dan Pelarasan
The ErGear Dual Monitor Desk Mount offers versatile adjustments for optimal viewkeselesaan:
- Pelarasan Ketinggian: Longgarkan clamp on the main pole to slide the arms up or down to your desired height. Re-tighten the clamp dengan selamat.
- Condong: Adjust the monitor's vertical angle by tilting it +/-45 degrees to reduce glare and eye strain.
- Pusing: Rotate the monitor horizontally +/-90 degrees for easy screen sharing or viewdari sudut yang berbeza.
- Putaran: Putar monitor 360 darjah untuk bertukar antara orientasi landskap dan potret.
- Arm Extension/Retraction: The articulating arms allow you to extend or retract your monitors closer or further from you. Adjust the tension screws on the arm joints as needed to hold the desired position.
Penyelenggaraan
- Periksa semua skru dan sambungan secara berkala untuk memastikan ia kekal ketat dan selamat.
- Bersihkan dudukan dengan kain lembut,amp kain. Elakkan pembersih yang kasar.
- Do not disassemble the mount unless instructed to do so.
Menyelesaikan masalah
- Monitor tidak rata: Ensure the VESA plates are correctly aligned and tightened. Adjust the small bolts on the tilt head to fine-tune alignment.
- Monitors sag or do not hold position: Tighten the tension screws on the arm joints. Refer to the assembly instructions for specific locations.
- Gunung berasa tidak stabil: Double-check that the C-Clamp or Grommet mount is securely fastened to the desk and all screws are fully tightened. Ensure your desk meets the thickness requirements.
Waranti dan Sokongan
For warranty information or technical support, please refer to the product packaging or contact ErGear customer service directly. Keep your purchase receipt as proof of purchase.
