BWT Cosmy The Bot 250 Robotic Pool Cleaner Instruction Manual

1. Pengenalan

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your BWT Cosmy The Bot 250 Robotic Pool Cleaner. Please read this manual thoroughly before using the product and retain it for future reference.

The BWT Cosmy The Bot 250 is designed for effective pool cleaning, featuring powerful suction and efficient navigation. Its design facilitates easy handling, and the adjustable suction power allows for adaptation to various debris types.

Image 1.1: The BWT Cosmy The Bot 250 Robotic Pool Cleaner, shown with a smartphone displaying its remote control application.

2. Maklumat Keselamatan

Sentiasa patuhi langkah keselamatan berikut untuk mengurangkan risiko kecederaan atau kerosakan:

• Ensure the power supply is disconnected before performing any maintenance or cleaning on the unit.
• Do not operate the cleaner if the power cable is damaged. Contact qualified service personnel for repair.
• Jauhkan kanak-kanak dan haiwan peliharaan dari kawasan kolam renang semasa pembersih beroperasi.
• Only use the cleaner in water temperatures between 10°C (50°F) and 35°C (95°F).
• Do not use the cleaner if there are people in the pool.
• Ensure the cleaner is fully submerged before starting operation.
• Avoid lifting the cleaner by its cable. Always use the handle provided.

3. Komponen Produk

The BWT Cosmy The Bot 250 Robotic Pool Cleaner consists of the following main components:

• Unit Utama: The robotic cleaner body, housing the motor and filtration system.
• Bakul Penapis: Removable basket for collecting debris.
• Brushes/Rollers: Located on the underside for scrubbing pool surfaces.
• Floating Cable: Connects the cleaner to the power supply unit.
• Unit Bekalan Kuasa: Converts AC power to safe DC power for the cleaner.

Imej 3.1: Depan view of the cleaner, highlighting the cleaning brushes and intake area.

Imej 3.2: Bahagian bawah view of the cleaner, illustrating the tracks and brush system for pool surface navigation and cleaning.

Imej 3.3: Dalaman view of the cleaner, showing the gear and motor components responsible for its movement and cleaning action.

4. Persediaan

1. Buka Pembungkusan Pembersih: Carefully remove the cleaner and all accessories from the packaging.
2. Connect the Floating Cable: Connect the floating cable to the power supply unit. Ensure the connection is secure.
3. Letakkan di Kolam Renang: Gently lower the cleaner into the pool. Allow it to sink to the bottom. Ensure there are no air bubbles trapped inside the unit.
4. Bekalan Kuasa Kedudukan: Place the power supply unit at least 3.5 meters (11.5 feet) from the edge of the pool, ensuring it is not exposed to direct sunlight or excessive moisture.
5. Pasangkan: Pasangkan unit bekalan kuasa ke soket elektrik yang dibumikan.

5. Arahan Operasi

1. Mulakan Kitaran Pembersihan: Press the power button on the power supply unit or use the remote control application (if applicable) to start the cleaning cycle. The cleaner will begin its programmed cleaning routine.
2. Laraskan Kuasa Sedutan: The Cosmy The Bot 250 features adjustable intake valves. To increase or decrease suction power, manually adjust the height of the intake valves located on the underside of the unit. This allows for optimized debris collection.
3. Pembersihan Monitor: The cleaner will navigate the pool floor and walls (depending on model features) to collect debris. Cleaning cycles are designed to be efficient and consume less energy.
4. End Cleaning Cycle: Once the cleaning cycle is complete, or if you wish to stop it manually, press the power button again.
5. Remove from Pool: Carefully pull the cleaner out of the water using its handle. Do not pull by the floating cable. Allow excess water to drain before placing it on a flat surface.

6. Penyelenggaraan

Regular maintenance ensures optimal performance and extends the lifespan of your robotic pool cleaner.

6.1. Cleaning the Filter Basket

An indicator light will illuminate when the filter basket is full and requires cleaning.

1. Putuskan Kuasa: Always unplug the power supply unit from the electrical outlet before cleaning.
2. Kompartmen Penapis Terbuka: Locate the filter access button/latch on the top of the cleaner and open the lid.
3. Keluarkan Bakul Penapis: Grasp the handle of the filter basket and lift it out of the cleaner.
4. Bilas Penapis: Use a garden hose to thoroughly rinse the filter basket, removing all trapped debris. Ensure all mesh surfaces are clear.
5. Masukkan Semula Penapis: Place the clean filter basket back into the cleaner, ensuring it is properly seated.
6. Tutup Tudung: Close the filter compartment lid securely.

Imej 6.1: Atas view of the cleaner with the filter compartment open, showing the filter basket inside.

Image 6.2: The filter basket removed from the cleaner, ready for rinsing.

6.2. Pembersihan dan Penyimpanan Am

• After each use, rinse the cleaner with fresh water to remove any pool chemicals or debris.
• Inspect the brushes and tracks for any tangled debris (hair, leaves, etc.) and remove them.
• Simpan pembersih di tempat yang sejuk dan kering, jauh daripada cahaya matahari langsung dan suhu yang melampau.
• Coil the floating cable loosely to prevent kinks or damage.

7. Penyelesaian masalah

If you encounter issues with your BWT Cosmy The Bot 250, refer to the following common problems and solutions:

Jika masalah berterusan selepas mencuba penyelesaian ini, sila hubungi sokongan pelanggan.

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information and customer support, please refer to the documentation included with your purchase or contact the manufacturer directly:

Pengeluar: STEWARD GROUP, LLC

Please have your model number (Cosmy The Bot 250, RURN-NOYO-S2M70) and purchase date available when contacting support.