Manual Arahan Coilovers maXpeedingrods

1. Pengenalan

This manual provides essential information for the proper installation, adjustment, maintenance, and safe operation of your maXpeedingrods Coilovers. These coilovers are designed to enhance vehicle handling and allow for adjustable ride height. Please read this manual thoroughly before attempting any installation or adjustment.

Keserasian Produk:

• For Volkswagen Golf MK7 (2015-2019) - Note: Only compatible with Torsion Rear Suspension. Not suitable for Multilink Rear Suspension.
• For Audi A3/S3 (8V) MK3 (2015-2019)
• For Seat Leon MK3 (2012-2019)
• For Skoda Octavia MK3 (2012-2019)

2. Maklumat Keselamatan

Working with vehicle suspension systems can be dangerous. Improper installation or adjustment can lead to serious injury or vehicle damage. Always follow these safety guidelines:

• Pemasangan Profesional Disyorkan: Adalah sangat disyorkan bahawa pemasangan dilakukan oleh juruteknik automotif yang bertauliah.
• Gunakan Alat yang Betul: Ensure you have all necessary tools and equipment, including jack stands, torque wrenches, and spring compressors.
• Sokongan Kenderaan: Always support the vehicle securely on jack stands before working underneath it. Never rely solely on a jack.
• Pakai Alat Keselamatan: Gunakan peralatan pelindung diri yang sesuai, termasuk cermin mata keselamatan dan sarung tangan.
• Follow Torque Specifications: Adhere to the vehicle manufacturer's torque specifications for all fasteners.
• Penjajaran Roda: Selepas pemasangan, penjajaran roda profesional adalah wajib untuk memastikan pengendalian kenderaan dan kehausan tayar yang betul.
• Pandu Uji: Perform a cautious test drive in a safe area after installation and adjustments to check for proper function and any unusual noises.

3. Kandungan Pakej

Verify that all components are present and undamaged upon opening the package. If any items are missing or damaged, contact customer support immediately.

Image 3.1: Packaging list showing all included components.

Pakej biasanya termasuk:

• 2x Front Coil-overs (complete with springs and top mounts)
• 2x Penyerap Hentakan Belakang
• 2x Rear Spring Kits (including springs and adjustable perches)
• 2x C Spanners (for height adjustment)

4. Ciri dan Reka Bentuk Produk

The maXpeedingrods Coilovers are engineered with specific features for performance and durability:

• Kadar Musim Bunga: Front: 7 kg/mm (392 in/lbs), Rear: 5 kg/mm (280 in/lbs). Springs undergo extensive testing to ensure minimal distortion.
• Tinggi boleh laras: Allows for lowering the vehicle by 35mm-75mm, providing a customizable stance while retaining original comfort.
• Twin-tube Structure: Offers a longer stroke and higher height adjustability compared to mono-tube designs, contributing to a more comfortable ride by reducing joint pressure.
• Bahan: Constructed from 6061 aluminum alloy with T6 for increased hardness, high strength, and durability. Features high-quality precision parts.
• 55CrSi Steel Springs: Made from alloy steel using a cold winding technique for sag-free performance.
• Durable Rubber TPV Dust Boots: Protect piston shafts from dirt and debris, extending component life.
• Sturdy Lower Brackets: Manufactured from carbon steel to withstand heavy loads without bending, deforming, or breaking.
• Solid Rubber Bump Stops: Integrated to prevent harsh bottoming out.
• Anti-rust Perches and Locking Rings: Designed for durability and lightweight performance.
• Heavy-duty Lower Mount: Anti-rust and robust construction.

Imej 4.1: Selesaiview of the maXpeedingrods Coilover set.

Image 4.2: Diagram illustrating the internal components of a twin-tube damper, including cylinder, shellcase, piston valve, oil chamber, and base valve.

Image 4.3: Close-up of key coilover components, highlighting the 55CrSi steel springs, durable TPV dust boots, and sturdy lower brackets.

5. Pemasangan

Installation of coilovers requires mechanical expertise and specialized tools. If you are not confident in your ability to perform this installation safely and correctly, seek assistance from a professional mechanic.

General Installation Steps (Consult a service manual for your specific vehicle for detailed instructions):

1. Sediakan Kenderaan: Park the vehicle on a level surface, engage the parking brake, and loosen the lug nuts on the wheels. Jack up the vehicle and secure it with jack stands. Remove the wheels.
2. Tanggalkan Penggantungan OEM: Disconnect any brake lines, ABS sensors, or sway bar links attached to the existing strut/shock assembly. Unbolt the lower mounting points and the upper strut/shock mounts. Carefully remove the old suspension components.
3. Prepare New Coilovers: For front coilovers, you may need to transfer the OEM top hat (upper mount) to the new coilover assembly if not pre-assembled. Ensure all collars are loose for initial height adjustment.
4. Pasang Coilover Baharu: Install the new coilover assemblies, securing the upper mounts first, then the lower mounting points. Reattach any disconnected lines or links.
5. Pelarasan Ketinggian Awal: Before fully tightening, set an approximate ride height. Refer to Section 6 for detailed adjustment procedures.
6. Ketatkan Semua Pengikat: Torque all bolts and nuts to the vehicle manufacturer's specifications.
7. Pasang semula Roda: Mount the wheels and hand-tighten lug nuts. Lower the vehicle to the ground and torque lug nuts to specification.
8. Pemeriksaan Selepas Pemasangan: Bounce the vehicle to settle the suspension. Check for any clearance issues or loose components.
9. Penjajaran Roda: A professional wheel alignment is crucial after any suspension component replacement or adjustment.

Image 5.1: Illustration of coilovers installed on a vehicle chassis, demonstrating ease of installation and adjustment.

6. Pelarasan Ketinggian

The coilovers allow for precise ride height adjustment. Always adjust both sides of the vehicle (front or rear) equally to maintain balance.

Image 6.1: Diagram illustrating the height adjustment mechanism of the coilovers.

Prosedur:

1. Kenderaan Angkat: Safely lift the vehicle so the wheels are off the ground and the suspension is unloaded.
2. Loosen Locking Collars: Use the provided C spanners to loosen the locking collars on the coilover body.
3. Laraskan Ketinggian: Rotate the main adjustment collar to raise or lower the vehicle. Turning clockwise typically lowers the vehicle, while counter-clockwise raises it. Make small, incremental adjustments.
4. Secure Locking Collars: Once the desired height is achieved, tighten the locking collars firmly against the adjustment collar to prevent movement.
5. Ulangi untuk Bahagian Lain: Ensure the corresponding coilover on the opposite side is adjusted to the exact same height.
6. Lower Vehicle and Settle: Lower the vehicle to the ground and drive a short distance or bounce the suspension to allow it to settle. Re-measure the ride height and make further fine adjustments if necessary.
7. Penjajaran Akhir: After all height adjustments are finalized, a professional wheel alignment is essential.

7. Pertimbangan Operasi

After installing coilovers, your vehicle's driving characteristics will change. Be aware of the following:

• Pengendalian yang Dipertingkatkan: The coilovers are designed to provide improved handling and a more responsive feel, especially for street use.
• Keselesaan Tunggangan: While designed for comfort, a lowered vehicle with performance suspension may have a firmer ride than stock.
• Pembersihan: Be mindful of reduced ground clearance, especially over speed bumps, potholes, and steep driveways, to avoid damage to the vehicle's undercarriage or suspension components.
• Gaya Pemanduan: Adapt your driving style to the new suspension setup.

Image 7.1: Coilovers designed for improved handling and comfortable street use.

8. Penyelenggaraan

Regular inspection and maintenance will ensure the longevity and performance of your coilovers.

• Pemeriksaan Berkala: Periksa gegelung secara berkala untuk sebarang tanda kerosakan, kebocoran, kakisan atau komponen yang longgar. Periksa but habuk untuk koyakan.
• Kebersihan: Keep the coilover bodies and threads clean, especially after driving in harsh conditions (e.g., snow, salt, dirt). This prevents corrosion and ensures smooth adjustment.
• Pelinciran: Apply a thin layer of anti-seize grease to the adjustment threads if they become stiff or difficult to turn.
• Pemeriksaan Tork: Re-check the torque on all mounting bolts and nuts after the first 500 miles and periodically thereafter.
• Penjajaran Roda: If you notice uneven tire wear or changes in handling, have your wheel alignment checked.

9. Penyelesaian masalah

If you experience issues with your coilovers, consult this section for common problems and solutions.

Image 9.1: Visual indicators for when suspension struts may need attention, including difficult steering control, uneven tire wear, rattling or clunking noises, and uncomfortable driving.

10. Spesifikasi

11. Waranti dan Sokongan

maXpeedingrods komited untuk menyediakan produk berkualiti dan kepuasan pelanggan.

• Sokongan Pelanggan: For any questions regarding installation, operation, or troubleshooting, please contact maXpeedingrods customer support.
• Bantuan Pakar: Rely on the maXpeedingrods engineering team for expert assistance and guidance.
• Pulangan: This product is returnable until January 31, 2026. Please refer to the retailer's return policy for specific terms and conditions.

Image 11.1: Emphasizing easy installation, expert support, and customer-centric service provided by maXpeedingrods.