Frico ORC07S Electric Towel Dryer with Blower

1. Pengenalan

Thank you for choosing the Frico ORC07S Electric Towel Dryer. This appliance is designed to provide efficient towel warming and supplementary heating for your bathroom. It features a 750W fluid heating element for consistent warmth and an integrated 1000W blower for rapid heating. Please read this manual carefully before installation and use to ensure safe and optimal operation.

2. Maklumat Keselamatan

WARNING: Failure to follow these safety instructions could result in fire, electric shock, injury, or damage to the product.

• This appliance is rated IP24, meaning it is protected against splashing water. It is suitable for use in bathrooms, but must not be installed directly above a bath or shower.
• Pastikan bekalan kuasa voltage sepadan dengan penarafan pada perkakas (203V).
• Pemasangan mesti dijalankan oleh juruelektrik yang berkelayakan mengikut peraturan pendawaian tempatan.
• Do not cover the appliance, especially the blower outlet, as this can cause overheating.
• Jauhkan kanak-kanak dan haiwan peliharaan dari perkakas semasa operasi.
• Jangan masukkan objek ke dalam bukaan pengudaraan.
• Putuskan sambungan daripada bekalan kuasa sebelum pembersihan atau penyelenggaraan.
• Jika kord bekalan rosak, ia mesti diganti oleh pengilang, ejen servisnya, atau orang yang berkelayakan yang serupa untuk mengelakkan bahaya.

3. Kandungan Pakej

Buka bungkusan kotak dengan berhati-hati dan pastikan semua barang ada dan tidak rosak. Jika terdapat sebarang barang yang hilang atau rosak, hubungi peruncit anda dengan segera.

• Frico ORC07S Electric Towel Dryer unit
• Wall mounting bracket(s) and hardware
• Manual Pengguna (dokumen ini)
• Alat kawalan jauh (pilihan, boleh dijual berasingan)

Figure 1: Frico ORC07S Electric Towel Dryer in its packaging, showing the main unit with the control panel and the towel rails, protected by plastic film and foam inserts.

4. Persediaan dan Pemasangan

This appliance is designed for wall-mounted installation. Professional installation is recommended.

4.1. Memilih Lokasi

• Select a wall location that is structurally sound and can support the weight of the unit.
• Ensure adequate clearance around the unit for air circulation and access to controls.
• Do not install directly above a power outlet or within reach of a bath or shower.
• Maintain a minimum distance from flammable materials.

4.2. Memasang Unit

1. Mark the drilling points on the wall using the provided template or by measuring the bracket positions.
2. Drill holes and insert appropriate wall plugs (if necessary for your wall type).
3. Secure the mounting brackets to the wall using the screws provided.
4. Carefully lift the towel dryer and hook it onto the wall brackets. Ensure it is securely seated.

4.3. Sambungan elektrik

• The appliance must be connected to a permanent electrical supply by a qualified electrician.
• Ensure the circuit is protected by a suitable residual current device (RCD).
• Verify that the electrical supply matches the appliance's rating (203V).

Figure 2: Frico ORC07S Electric Towel Dryer mounted on a wall, showcasing its full design with towel rails and the integrated blower unit at the bottom. A remote control is shown separately on the right.

5. Arahan Operasi

5.1. Panel Kawalan Selesaiview

The control panel is located at the bottom of the unit. It features a digital display and several buttons for operation.

Rajah 3: Jarak dekat view of the Frico ORC07S Electric Towel Dryer's control panel, displaying buttons for Mode, Lock, Plus, Minus, Boost, and a digital display for settings.

• Butang Mod: Cycles through different operating modes (e.g., Comfort, Eco, Anti-freeze, Program).
• Butang Kunci: Activates/deactivates the child lock function.
• Butang '+' / '-': Adjusts temperature settings, timer duration, or program parameters.
• Butang Boost: Activates the 1000W blower for a rapid heating period (typically 15-30 minutes).
• Paparan Digital: Menunjukkan tetapan suhu, mod atau pemasa semasa.

5.2. Operasi Asas

1. Hidupkan/Mati Kuasa: Press and hold the Mode button for a few seconds to turn the unit on or off.
2. Menetapkan Suhu: In Comfort mode, use the '+' and '-' buttons to set your desired room temperature. The fluid heating element (750W) will maintain this temperature.
3. Using the Blower (Boost Function): Press the 'Boost' button to activate the 1000W blower. This provides quick, powerful heating. The blower will typically run for a preset duration and then turn off automatically.
4. Menukar Mod: Press the 'Mode' button repeatedly to cycle through available operating modes. Refer to the display for the active mode.
5. Kunci Kanak-kanak: Press and hold the 'Lock' button to activate or deactivate the child lock. This prevents accidental changes to settings.

5.3. Advanced Functions (Programming)

The ORC07S may include programmable features allowing you to set specific heating schedules. Refer to the detailed instructions in the full manual (if provided separately) for programming steps. Typically, this involves setting time periods for Comfort, Eco, or Anti-freeze modes.

6. Penyelenggaraan

Regular cleaning and maintenance will ensure the longevity and efficient operation of your towel dryer.

• Pembersihan: Before cleaning, ensure the appliance is switched off and disconnected from the power supply. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, solvents, or harsh chemicals.
• Bolong Udara: Periodically check the air intake and outlet vents for dust or lint accumulation. Use a soft brush or vacuum cleaner to gently remove any blockages.
• Sistem Bendalir: The fluid heating system is sealed and requires no user maintenance. Do not attempt to open or service the fluid reservoir.

7. Penyelesaian masalah

If you encounter issues with your Frico ORC07S, please consult the following table before contacting customer support.

8. Spesifikasi

9. Waranti dan Sokongan

Specific warranty information is not available in the provided product details. Please refer to the warranty card included with your purchase or contact your retailer for details regarding the warranty period and terms.

For technical support, spare parts, or service inquiries, please contact Frico customer service or your authorized dealer. Keep your purchase receipt and model reference (FRI42256) handy when contacting support.

Availability of spare parts and software updates is not specified in the product information.