pengenalan
The ZAGG InvisibleShield Glass Elite+ Plus is a premium tempered glass screen protector designed to offer superior protection for your compatible iPhone models. This manual provides comprehensive instructions for setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your screen protector.
Ciri-ciri Utama:
- Extreme Scratch & Shatter Protection: Ion exchange technology increases surface compression for enhanced hardness and scratch-resistance, providing advanced shatter protection.
- Clean, Smudge-free Screen: ClearPrint technology makes fingerprints virtually invisible, maintaining a crystal-clear display.
- Rasa Halus dan Selembut Sutera: The surface mimics the smooth, silky feel of your phone's original screen.
- Permohonan Mudah: Features EZ Apply tabs and an installation tray for accurate, bubble-free alignment.
- Case Friendly Coverage: Designed to fit seamlessly with most phone cases.
- Keserasian: Compatible with Apple iPhone 12, iPhone 12 Pro, iPhone 11, and iPhone XR.
Apa yang ada dalam Kotak
Image: ZAGG InvisibleShield Glass Elite+ Plus packaging and included accessories.
Your ZAGG InvisibleShield Glass Elite+ Plus package includes:
- Pelindung Skrin
- EZ Apply Tray
- Install Mat
- Kain Microfibre
- Lap Pembersihan
- Pelekat Penyingkiran Habuk
- Pengikis
Persediaan dan Pemasangan
Follow these steps for a smooth and bubble-free installation of your ZAGG InvisibleShield Glass Elite+ Plus screen protector.
Penyediaan:
- Bersihkan Peranti Anda: Use the provided cleaning wipe to thoroughly clean your phone's screen, removing all smudges and oils.
- Keringkan Skrin: Use the microfibre cloth to dry the screen completely, ensuring no moisture remains.
- Keluarkan Debu: Use the dust removal sticker to pick up any remaining lint or dust particles from the screen. Ensure the screen is completely free of debris.
Permohonan:
- Letakkan Dulang EZ Apply: Place your phone on the install mat. Position the EZ Apply Tray over your phone, ensuring it aligns correctly with the device.
- Peel the Backing: Carefully peel off the protective backing from the screen protector using the tab marked '1'. Avoid touching the adhesive side.
- Selaraskan dan Gunakan: Place the screen protector into the EZ Apply Tray, aligning the cutouts with the corresponding pegs. The screen protector will gently lower onto your phone's screen.
- Melicinkan Buih: Press down firmly on the center of the screen protector and use the provided scraper tool to gently push out any air bubbles towards the edges.
- Remove Tray and Final Polish: Once applied, carefully remove the EZ Apply Tray. Use the microfibre cloth to give your screen a final polish and remove any remaining fingerprints or smudges.
Image: Phone placed in an EZ Apply Tray for easy and accurate screen protector installation.
Video Pemasangan:
Installation for Glass Screen Protection (Seller Video)
Video: This video demonstrates the installation process for ZAGG InvisibleShield Glass Screen Protection, showing how to clean the screen, use the alignment tray, and apply the protector for a bubble-free finish.
Glass Elite Family Install (Official ZAGG Video)
Video: An official ZAGG video demonstrating the installation of the Glass Elite family screen protectors, including steps for cleaning, using the EZ Apply tray, and ensuring proper alignment.
Arahan Operasi
Once installed, your ZAGG InvisibleShield Glass Elite+ Plus screen protector operates seamlessly with your device. It is designed to maintain the original touch sensitivity and display clarity of your iPhone.
- Sensitiviti Sentuh: The screen protector is engineered to preserve the native touch experience of your device.
- Kejelasan Paparan: Enjoy crystal-clear visuals without distortion, thanks to its high-transparency design.
- Rintangan Cap Jari: ClearPrint technology actively reduces the appearance of fingerprints and smudges.
Image: Hand touching a phone screen protected by ZAGG InvisibleShield, highlighting smudge-free ClearPrint technology.
Penyelenggaraan
To keep your ZAGG InvisibleShield Glass Elite+ Plus in optimal condition, follow these simple maintenance tips:
- Pembersihan tetap: Use a soft, lint-free microfibre cloth (like the one provided) to gently wipe the screen protector. For stubborn smudges, slightly dampbersihkan kain dengan air atau pencuci yang selamat untuk skrin.
- Elakkan Bahan Kimia Keras: Do not use abrasive cleaners, alcohol, or ammonia-based solutions, as these can damage the oleophobic coating.
- Lindungi daripada Objek Tajam: While highly scratch-resistant, extreme pressure from sharp objects can still cause damage. Avoid placing your phone face down on rough surfaces.
- Keserasian Kes: Ensure your phone case does not lift the edges of the screen protector, which can lead to peeling or dust accumulation.
Menyelesaikan masalah
If you encounter any issues with your ZAGG InvisibleShield Glass Elite+ Plus, refer to the common problems and solutions below:
| Masalah | Penyelesaian |
|---|---|
| Air Bubbles After Installation: | Small bubbles often disappear within 24-48 hours. For larger bubbles, gently lift the nearest edge of the protector and reapply, using the scraper to push the air out. |
| Dust Under the Protector: | If dust is trapped, carefully lift the nearest corner of the protector using a piece of tape. Use another piece of tape to dab the dust off the adhesive side and the screen, then reapply. |
| Edges Not Sticking: | Ensure the screen is perfectly clean and dry before application. Press down firmly on the edges for a few minutes. If the issue persists, it might be due to case interference. |
| Kepekaan Sentuhan yang Dikurangkan: | This is rare. Ensure the protector is applied correctly without gaps. If your phone has a "Touch Sensitivity" setting, try increasing itu. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Dimensi Produk | 7 x 5 x 0.5 inci (Pembungkusan) |
| Berat Barang | 2.39 auns |
| bahan | Tempered Glass (Strong Aluminosilicate Glass) |
| Kekerasan Item | Keras |
| warna | Jelas |
| Saiz Skrin | 6.1 Inches (Compatible Phone Screen Size) |
| Peranti Serasi | Apple iPhone 12 Pro, Apple iPhone XR, Apple iPhone 11, Apple iPhone 12 |
| Ciri Khas | Case Friendly Coverage, Scratch Resistant, Smudge Resistant (ClearPrint Technology) |
| Nombor Model | 200106650-Scraper |
Image: Illustration showing the 4X stronger aluminosilicate glass of the screen protector.
Image: Diagram illustrating the layered construction of the screen protector, showing the protective treatment layer over strong aluminosilicate glass.
Waranti dan Sokongan
ZAGG InvisibleShield Glass Elite+ Plus comes with a Waranti Seumur Hidup Terhad. For warranty claims or further support, please visit the official ZAGG webtapak atau hubungi perkhidmatan pelanggan mereka.
- Pendaftaran Waranti: It is recommended to register your product on the ZAGG webtapak untuk mengaktifkan jaminan anda.
- Jaminan Penggantian: The Limited Lifetime Warranty typically covers replacements for damaged screen protectors. Shipping and handling fees may apply.
- Sokongan dalam talian: For detailed FAQs, troubleshooting guides, and contact information, please refer to the official ZAGG support pages.
Untuk maklumat lanjut, layari: zagg.com
