Yaheetech Metal Bed Frame 90x200cm - Instruction Manual

pengenalan

This manual provides detailed instructions for the assembly, usage, maintenance, and troubleshooting of your Yaheetech Metal Bed Frame (Model YA-00130392). Please read these instructions carefully before beginning assembly and retain them for future reference. This bed frame is designed for a 90x200cm mattress and features a robust metal construction with a vintage estetik.

Maklumat Keselamatan

• Ensure all parts are present and undamaged before beginning assembly. Do not proceed if any parts are missing or damaged.
• Assemble the bed frame on a soft, clean surface (e.g., a carpet or blanket) to prevent scratches to the product or your floor.
• It is recommended that two adults assemble this bed frame for safety and ease.
• Do not fully tighten screws or bolts until all components are loosely assembled and correctly aligned.
• Once assembly is complete, ensure all bolts and screws are securely tightened for stability.
• Jangan melebihi kapasiti berat maksimum bagi 204 kg (450 lbs).
• Jauhkan bahagian kecil dan bahan pembungkus daripada kanak-kanak semasa pemasangan untuk mengelakkan bahaya tercekik.

Kandungan Pakej

Sila sahkan bahawa semua komponen berikut disertakan dalam pakej anda:

• Komponen kepala katil
• Komponen papan kaki
• Rel sisi
• Metal slats (12 pieces)
• Central support legs
• Hardware pack (screws, bolts, washers, Allen key)
• Manual arahan

If any parts are missing or damaged, please contact Yaheetech customer service for assistance.

Arahan Persediaan dan Pemasangan

Follow these steps carefully to assemble your bed frame. Refer to the diagrams for visual guidance.

1. Buka bungkus dan Kenalpasti Bahagian: Carefully unpack all components and lay them out on a clean, soft surface. Refer to the parts list in your manual to identify each piece.
2. Pasang Rel Sisi pada Kepala katil: Connect the side rails to the headboard using the provided bolts and Allen key. Insert bolts loosely at this stage.
3. Pasang Rel Sisi pada Papan Kaki: Connect the other end of the side rails to the footboard. Again, insert bolts loosely.
4. Pasang Kaki Sokongan Pusat: Attach any central support legs to the main frame as indicated in the diagram.
5. Masukkan Bilah Logam: Place the metal slats into the designated slots on the side rails. Ensure they are evenly spaced and securely seated. The built-in design helps prevent mattress sliding.
6. Ketatkan Semua Pengikat: Once all components are in place and aligned, systematically tighten all bolts and screws firmly. Ensure the frame is stable and level.
7. Attach Protective Foot Caps: Ensure the protective rubber caps are securely fitted to the bottom of all bed legs to prevent floor damage.

Rajah 1: Dimensi keseluruhan dan kapasiti berat rangka katil.

Figure 2: Visual guide for installation steps, focusing on pipe connections.

Figure 3: Detail of L-shaped plates reinforcing joints for a stable structure.

Figure 4: Illustration of how built-in slats prevent mattress sliding.

Operasi dan Penggunaan

• Peletakan tilam: Place your 90x200cm mattress directly onto the metal slats. A box spring is not required.
• Support and Airflow: The 12 sturdy metal slats provide optimal air circulation for your mattress and stable support, contributing to a comfortable sleep.
• Kapasiti Berat: The bed frame is designed to support a maximum weight of 204 kg (450 lbs). Do not exceed this limit to ensure longevity and safety.
• Keselesaan Kepala Katil: The high headboard offers comfortable back support for reading or relaxing in bed.
• Storan Bawah Katil: The 32 cm (12.6 inches) ground clearance provides ample space for under-bed storage, helping to keep your room tidy.

Figure 5: Key features including headboard, frame durability, storage, and protective feet.

Penyelenggaraan

• Pembersihan: Lap bingkai logam dengan lembut, damp kain. Elakkan menggunakan pembersih yang kasar, bahan kimia yang keras atau pelarut, kerana ini boleh merosakkan kemasan.
• Pemeriksaan biasa: Periodically check all bolts and screws to ensure they remain tight. Retighten if necessary to maintain the bed frame's stability and prevent any potential squeaking.
• Elakkan beban berlebihan: Do not place excessive weight on the bed frame beyond its specified capacity to prevent structural damage.

Menyelesaikan masalah

• Bunyi Berdecit:
  • Check all bolts and screws. Loosen them slightly, adjust the frame to ensure it's level, then retighten firmly.
  • Ensure the bed is placed on a flat, even surface. Uneven floors can cause stress on the frame, leading to noise.
  • Verify that all slats are correctly seated in their designated slots and are not rubbing against each other or the frame.
• Ketidakstabilan atau Goyangan:
  • Confirm that all connections are securely tightened.
  • Ensure the bed frame was assembled correctly according to the instructions. Disassemble and reassemble if unsure.
  • Check if the floor is uneven; consider using furniture pads or shims under the legs if needed.
• Tilam Gelongsor:
  • The bed frame features built-in slats designed to prevent mattress sliding. Ensure your mattress is correctly positioned within the frame and not overhanging.

Spesifikasi

Rajah 6: Spesifikasi produk terperinci.

Waranti dan Sokongan

For warranty information, technical assistance, or to report missing/damaged parts, please contact Yaheetech customer service directly. Refer to your purchase documentation or the Yaheetech official webtapak untuk butiran hubungan terkini.