pengenalan
This manual provides detailed instructions for the assembly, operation, and maintenance of your Yaheetech Queen Bed Frame. Designed with a wing side on the wide upholstered headboard and skin-friendly velvet fabric, this bed frame offers robust support with its interior solid wood framework, robust support feet, and 12 durable wooden slats. It is designed to be used without a box spring and features a 6-inch ground clearance for easy cleaning.
Maklumat Keselamatan
Do not use with a mattress that is too soft or thin, as it may cause the mattress to sag and create a gap between the mattress and the bed frame, posing a risk of entrapment. This bed frame is designed for adult use and is not suitable for infants or young children. Always ensure that the mattress is properly supported and does not sag or dip in the middle. Keep the area around the bed clear of any objects that could pose a tripping hazard.
Senarai Komponen
Before beginning assembly, ensure all parts are present and accounted for. Refer to the diagram below for identification.
Figure 1: All components of the Yaheetech Queen Bed Frame, including the tufted headboard, upholstered side rails, central support beam, support legs, and wooden slats.
- Upholstered Headboard with Wing Side
- Upholstered Side Rails (2)
- Kaki Kaki Berlapis
- Central Support Beam
- Kaki Sokongan (pelbagai saiz)
- Bilah Kayu (12 keping)
- Pek Perkakasan (skru, pencuci, sepana Allen)
Arahan Perhimpunan
Assembly typically requires one person and takes approximately 1-2 hours. Follow these steps carefully:
- Langkah 1: Bongkar dan Kenal Pasti Bahagian. Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches. Verify all parts against the components list.
- Step 2: Assemble the Headboard and Side Rails. Attach the upholstered side rails to the headboard using the provided hardware. Ensure all connections are secure but do not overtighten until all main frame pieces are connected.
- Step 3: Attach the Footboard. Connect the footboard to the assembled side rails. Once the main frame is complete, tighten all screws securely.
- Step 4: Install the Central Support Beam and Legs. Position the central support beam along the center of the bed frame. Attach the support legs to the central beam and the side rails as indicated in the diagram. These provide crucial stability.
- Step 5: Place the Wooden Slats. Lay the wooden slats across the bed frame, ensuring even spacing. Secure each slat to the side rails using the provided screws. This design enhances durability and prevents mattress sagging.
- Langkah 6: Semakan Akhir. Double-check all connections to ensure they are tight and secure. The bed frame is now ready for your mattress.
Figure 2: The fully assembled bed frame, highlighting the sturdy wooden slat support system.
Ciri dan Faedah Produk
- Reka Bentuk Sisi Sayap: The wide upholstered headboard with a wing side and skin-friendly velvet fabric provides a comfortable and stylish focal point for your bedroom.
- Tiada Spring Kotak Diperlukan: The robust wooden slat support system eliminates the need for a box spring, offering direct mattress support and breathability.
- Soft to Touch: The velvet fabric and dense foam padding on the headboard ensure comfort and prevent sagging.
- Pembinaan Kayu yang Kukuh: An interior solid wood framework, robust support feet, and 12 durable wooden slats provide a maximum weight capacity of 800 lbs.
- Ruang Bawah Katil yang Berpatutan: A 6-inch ground clearance allows for easy cleaning, including robotic vacuum access.
Figure 3: Detail of the soft velvet fabric and tufted design on the headboard.
Figure 4: The 6-inch ground clearance facilitates easy cleaning under the bed.
Penyelenggaraan
To maintain the quality and appearance of your Yaheetech Queen Bed Frame, follow these care instructions:
- Pembersihan: The upholstered velvet fabric should be dry cleaned only. For minor spills, gently blot with a clean, dry cloth. Avoid harsh chemicals or abrasive cleaners.
- Pemeriksaan Berkala: Periksa semua skru dan sambungan secara berkala untuk memastikan ia kekal ketat. Ketatkan semula jika perlu untuk mengekalkan kestabilan dan mengelakkan bunyi berderit.
- Elakkan Cahaya Matahari Terus: Prolonged exposure to direct sunlight may cause the fabric color to fade.
- Lindungi daripada Kelembapan: Keep the bed frame away from excessive moisture or humidity to prevent damage to the wooden components.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Rangka katil berdecit. | Loose connections or slats. | Tighten all screws on the frame and slats. Ensure slats are properly seated. |
| Tilam kendur di bahagian tengah. | Insufficient support from slats or central beam. | Verify all wooden slats are securely attached and the central support beam is correctly installed with its legs. Ensure mattress is compatible with a slat-based system. |
| Headboard appears too low. | Thick mattress or pillow arrangement. | The headboard height is fixed. Consider a thinner mattress or adjusting pillow placement if visual height is a concern. |
Spesifikasi
| Atribut | Perincian |
|---|---|
| Saiz | Ratu |
| warna | Kelabu Muda |
| Dimensi Produk | 84"L x 64"W x 41"H |
| Jenis Kain Upholsteri | baldu |
| Had berat | 800 paun |
| Berat Barang | 69.9 paun |
| Pembersihan Tanah | 6 Inci |
| Perhimpunan Diperlukan | ya |
Waranti dan Sokongan
Your Yaheetech Queen Bed Frame comes with a 30-day easy returns policy. For any product-related inquiries, assembly assistance, or warranty claims, please contact Yaheetech customer support. You can find more information and contact details on the official Yaheetech Store on Amazon.