Manual Arahan Penggantian Penapis Alkali WD-EDFA Waterdrop

pengenalan

This manual provides essential information for the proper installation, operation, and maintenance of your Waterdrop WD-EDFA Alkaline Filter Replacement. Please read these instructions carefully before use to ensure optimal performance and longevity of your product.

Produk Selesaiview

The Waterdrop WD-EDFA Alkaline Filter is designed to replace filters in compatible Waterdrop Electric Pitcher models. It features advanced filtration technology to improve water quality and increase pH levels.

Ciri-ciri Utama

• Alkaline Filtration: Provides a prolonged slow release for pH balancing, increasing pH awal sebanyak 1.5-2.5.
• Pengurangan Bahan cemar: Effectively reduces over 30 contaminants, including chlorine, PFOA/PFOS, lead, and other impurities.
• Keselamatan Bahan: Constructed from BPA-free and Lead-free materials.
• Tapis Kehidupan: Each filter lasts up to 3 months or 200 gallons, whichever occurs first.

Model yang Serasi

This filter is compatible with the following Waterdrop Electric Water Filter Pitcher models:

• WD-ED01AW
• WD-ED01AB
• WD-ED01B
• WD-ED01W
• WD-EDC01W
• WD-ED02W
• WD-ED02B
• WD-ED04W-L
• WD-ED04B-L

Spesifikasi

Persediaan dan Pemasangan

Persediaan Awal

Before installing the new filter, ensure your Waterdrop Electric Pitcher is clean and empty.

Filter Installation Steps

1. Remove the water pumping unit from the pitcher.
2. Pinch the buckles on both sides of the existing filter and pull it out. Allow any remaining water to drain from the old filter.
3. Insert the new Waterdrop WD-EDFA filter into the water pumping unit. Align the buckles to the notches and push until a "click" sound is heard, indicating it is securely in place.
4. Place the water pumping unit back into the pitcher.
5. Fill the pitcher with tap water up to the MAX fill line.
6. Tap the "Drop" button once to activate the pitcher. Press and hold the "Drop" button for 3 seconds. When the button turns blue, the filter is successfully replaced and ready for use.

This image illustrates the five-step process for replacing the filter: 1. Pull out the water pumping unit. 2. Push the filter inwards and pull it out. 3. Align buckles and insert new filter. 4. Listen for a 'click'. 5. Tap and hold the 'Drop' button to activate.

Arahan Operasi

To dispense filtered water, ensure the pitcher is filled and the filter is correctly installed.

1. Letakkan gelas atau bekas di bawah muncung dispenser.
2. Double-tap the "Drop" button on the top of the water pumping unit to start water flow.
3. Single-tap the "Drop" button to stop water flow.

The indicator light on the water pumping unit will show the operational status of the pitcher.

Penyelenggaraan

Penggantian Penapis

For optimal performance and water quality, it is recommended to replace the filter after filtering 200 gallons of water or every 3 months, whichever occurs first. Local water quality may affect filter life.

Refer to the "Filter Installation Steps" in the Setup and Installation section for detailed replacement instructions.

This image displays the Waterdrop WD-EDFA filter, highlighting its model number, compatible pitcher models, operating temperature range, flow rate, and recommended filter life of up to 3 months or 200 gallons.

Pembersihan

Regularly clean the pitcher and water pumping unit with mild soap and water. Do not use abrasive cleaners. Ensure all parts are thoroughly rinsed before reassembly.

Menyelesaikan masalah

Aliran Air Lambat

• Check if the filter needs replacement. A clogged filter can reduce flow rate.
• Ensure the filter is correctly seated in the water pumping unit.

Water Taste or Odor Issues

• Replace the filter if it has exceeded its recommended lifespan.
• Ensure the pitcher and filter unit are clean.

Indicator Light Not Functioning

• Check if the unit's battery is charged. Connect the USB charging cable.
• Ensure the water pumping unit is properly seated in the pitcher.

Waranti dan Sokongan

Untuk maklumat jaminan atau sokongan teknikal, sila rujuk laman web rasmi Waterdrop. website or contact Waterdrop customer service directly.

e-mel: service@waterdropfilter.com

Phone: 1-888-352-3558 (U.S.)